Matching a modified vee Alumacraft Dominator 165 CS 2007 against a deep vee Alumacraft Fisherman 160 CS 2012 means you're likely deciding between two genuinely different on-water experiences. Hull type shapes everything from ride quality and fuel burn to dock handling and resale trajectory.

On paper these two are close siblings in the size department — Alumacraft Dominator 165 CS 2007 at 16,0 ft versus Alumacraft Fisherman 160 CS 2012 at 16,3 ft. Weight tells a clearer story for trailering families: the Alumacraft Dominator 165 CS 2007 tips the scales at 1 175 lbs — 553 lbs more than the Alumacraft Fisherman 160 CS 2012 at 622 lbs. That difference is meaningful if you're working within a half-ton or three-quarter-ton truck's tow rating, especially once you factor in a motor, gear, and fuel.

The power gap is worth calling out. Rated to 90 hp, the Alumacraft Dominator 165 CS 2007 has a 50-hp advantage over the Alumacraft Fisherman 160 CS 2012's 40-hp ceiling — enough to notice on acceleration and at cruising speed, particularly with a full passenger load.

Both boats are rated for 5 passengers — a good fit for a family of four or five plus guests. Comfort at capacity is another matter; the longer hull typically means more seat options and better weight distribution.

At this size, power-to-weight ratio matters more than outright horsepower. The Alumacraft Dominator 165 CS 2007 comes in at 13 lbs per hp versus 16 lbs per hp for the Alumacraft Fisherman 160 CS 2012. The lower the ratio the more explosive the acceleration — meaningful on a short RIB where bursts of speed, quick planing, and agility in surf or tight waterways define the experience.