Alumacraft Crappie Pro 2000 vs Alumacraft MV 1756 AW RR 2005 - Boat Spec Comparison

Q: Which is easier to trailer — the Alumacraft Crappie Pro 2000 or the Alumacraft MV 1756 AW RR 2005?

For trailering, the Alumacraft MV 1756 AW RR 2005 has the edge at 6 lbs dry weight versus 67 lbs for the Alumacraft Crappie Pro 2000. Add a motor (typically 300–500 lbs for an outboard in this class), gear, and a partial fuel load and the difference grows. Lighter is friendlier on smaller tow vehicles and on fuel economy while hauling.

Q: What is the maximum horsepower rating for these boats?

The Alumacraft MV 1756 AW RR 2005 has a documented max rating of 115 hp. Engine specifications for the Alumacraft Crappie Pro 2000 were not available in our database — check the OEM spec sheet or manufacturer's website for confirmation.

Q: How many people can each boat hold?

The Alumacraft Crappie Pro 2000 is Coast Guard rated for 4 passengers, while the Alumacraft MV 1756 AW RR 2005 is certified for 5. Note that legal capacity and comfortable capacity aren't always the same thing — on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.

Q: Which boat is wider, and does it affect trailering?

The Alumacraft MV 1756 AW RR 2005 measures 83" wide, compared to 74" for the Alumacraft Crappie Pro 2000. The US standard-width towing limit is 8’6" (102") in most states — anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.

Q: Are the Alumacraft Crappie Pro 2000 and Alumacraft MV 1756 AW RR 2005 from the same manufacturer?

Yes — both the Alumacraft Crappie Pro 2000 and the Alumacraft MV 1756 AW RR 2005 are built by Alumacraft. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.

Boat Comparison

Alumacraft Crappie Pro 2000 vs Alumacraft MV 1756 AW RR 2005

Alumacraft

Alumacraft Crappie Pro 2000

2000

View full specs →

Alumacraft

Alumacraft MV 1756 AW RR 2005

2005

View full specs →

Detailed Evaluation & Buyer Recommendation

Alumacraft Crappie Pro 2000 vs Alumacraft MV 1756 AW RR 2005 — Same Brand, Different Boat

The Alumacraft Crappie Pro 2000 vs Alumacraft MV 1756 AW RR 2005 comparison sits squarely in the category of decisions where specs alone won't tell the whole story — intended use, storage, and long-term ownership costs all factor in.

The Alumacraft MV 1756 AW RR 2005 tops out at 115 hp. Engine specs for the Alumacraft Crappie Pro 2000 aren't listed — confirm with a dealer before selecting an outboard.

For family outings this is probably the sharpest distinction between the two. The Alumacraft MV 1756 AW RR 2005 is rated for 5 passengers, while the Alumacraft Crappie Pro 2000 caps at 4. If you're regularly pulling extended family or a group of friends onto the water, the extra seats on the Alumacraft MV 1756 AW RR 2005 could be the deciding factor.

Bottom line: Choose the Alumacraft MV 1756 AW RR 2005 if your priority is putting more people on the water — it handles 5 passengers and at 17,0 ft it has the deck room to back that rating up comfortably. The Alumacraft Crappie Pro 2000 is the smarter pick if you want a lighter, easier-to-trailer boat rated for 4 that costs less to run day-to-day.

General Boat Info

MakeAlumacraft

ModelCrappie Pro

ModelMV 1756 AW RR

Model Year2

Model Year2005

Measurements / Dimensions

Beam74"

Beam83 in. (2.10 m) Bottom: 56 in. (1.42 m)

Beam - Meters1.88

Beam - Meters2.11

Beam - Inches74

Beam - Inches83

Weight - Detail670 lbs

Weight - Detail600 lbs. (272 kg)

Weight - kg303.91

Weight - kg272.16

Weight - lbs.67

Weight - lbs.6

Length overall - Detail16' 8"

Length overall - Detail17 ft. 0 in. (5.18 m)

Length overall - Meters4.88

Length overall - Meters5.18

Length overall - Inches192

Length overall - Inches204

Width [transom] - Detailnot available

Width [transom] - Detail83 in. (2.11 m)

Height - Detailnot available

Height - Detail24 in. (.60 m)

Height - Metersnot available

Height - Meters0.61

Height - Inchesnot available

Height - Inches24

Height [transom]not available

Height [transom]29 in. (.73 m)

Length - Metersnot available

Length - Meters5.18

Length - Feetnot available

Length - Feet17

Body / Hull

Hull materialAluminum

Hull thicknessnot available

Hull thicknessBottom/sides: .102 in. (2.5 mm)

Engine and Drivetrain

Engine/s standard30 - 60hp

Engine/s standardnot available

Fuel tank capacity - Detailnot available

Fuel tank capacity - Detail25 gal. (95 l)

Fuel tank capacity - Litersnot available

Fuel tank capacity - Liters94.64

Fuel tank capacity - Galnot available

Fuel tank capacity - Gal25

Engine maxnot available

Engine max115 hp (85 kw)

Operational Info

Maximum people4 person

Maximum people5

Alumacraft Crappie Pro 2000 vs Alumacraft MV 1756 AW RR 2005 — Common Questions

Which is easier to trailer — the Alumacraft Crappie Pro 2000 or the Alumacraft MV 1756 AW RR 2005?

For trailering, the Alumacraft MV 1756 AW RR 2005 has the edge at 6 lbs dry weight versus 67 lbs for the Alumacraft Crappie Pro 2000. Add a motor (typically 300–500 lbs for an outboard in this class), gear, and a partial fuel load and the difference grows. Lighter is friendlier on smaller tow vehicles and on fuel economy while hauling.

What is the maximum horsepower rating for these boats?

The Alumacraft MV 1756 AW RR 2005 has a documented max rating of 115 hp. Engine specifications for the Alumacraft Crappie Pro 2000 were not available in our database — check the OEM spec sheet or manufacturer's website for confirmation.

How many people can each boat hold?

The Alumacraft Crappie Pro 2000 is Coast Guard rated for 4 passengers, while the Alumacraft MV 1756 AW RR 2005 is certified for 5. Note that legal capacity and comfortable capacity aren't always the same thing — on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.

Which boat is wider, and does it affect trailering?

The Alumacraft MV 1756 AW RR 2005 measures 83" wide, compared to 74" for the Alumacraft Crappie Pro 2000. The US standard-width towing limit is 8’6" (102") in most states — anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.

Are the Alumacraft Crappie Pro 2000 and Alumacraft MV 1756 AW RR 2005 from the same manufacturer?

Yes — both the Alumacraft Crappie Pro 2000 and the Alumacraft MV 1756 AW RR 2005 are built by Alumacraft. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.

← Alumacraft Crappie Pro 2000 full specs ← Alumacraft MV 1756 AW RR 2005 full specs