The Alumacraft Competitor 165 Tiller 2013 vs Alumacraft MV 1860 AW SPL 2005 comparison sits squarely in the category of decisions where specs alone won't tell the whole story — intended use, storage, and long-term ownership costs all factor in.

On paper these two are close siblings in the size department — Alumacraft Competitor 165 Tiller 2013 at 16,6 ft versus Alumacraft MV 1860 AW SPL 2005 at 18,0 ft. At 92 lbs and 105 lbs respectively, both sit in a similar weight class — either should pair comfortably with most mid-size SUVs and half-ton trucks, though always confirm your specific tow rating with the motor added.

The power gap is worth calling out. Rated to 115 hp, the Alumacraft MV 1860 AW SPL 2005 has a 45-hp advantage over the Alumacraft Competitor 165 Tiller 2013's 70-hp ceiling — enough to notice on acceleration and at cruising speed, particularly with a full passenger load. Fuel capacity breaks the other way: the Alumacraft Competitor 165 Tiller 2013 carries 17 gallons versus 8 gallons in the Alumacraft MV 1860 AW SPL 2005. On a lake day that's negligible, but for coastal cruising or long reservoir runs the extra range matters.

Both boats are rated for 6 passengers — a good fit for a family of four or five plus guests. Comfort at capacity is another matter; the longer hull typically means more seat options and better weight distribution.

At this size, power-to-weight ratio matters more than outright horsepower. The Alumacraft MV 1860 AW SPL 2005 comes in at 1 lbs per hp versus 1 lbs per hp for the Alumacraft Competitor 165 Tiller 2013. The lower the ratio the more explosive the acceleration — meaningful on a short RIB where bursts of speed, quick planing, and agility in surf or tight waterways define the experience.