Detailed Evaluation & Buyer Recommendation
Alumacraft Classic 165 CS 2012 vs Alumacraft MV 1756 AW 2010: Same Brand, Different Boat
The Alumacraft Classic 165 CS 2012 is a deep-V design and the Alumacraft MV 1756 AW 2010 is a modified-V design, so you're likely deciding between two noticeably different on-water experiences. Hull type shapes everything from ride quality and fuel burn to dock handling and resale trajectory.
On paper these two are close siblings in the size department - Alumacraft Classic 165 CS 2012 at 16,3 ft versus Alumacraft MV 1756 AW 2010 at 17,0 ft. Weight tells a clearer story for trailering families: the Alumacraft Classic 165 CS 2012 tips the scales at 895 lbs - 295 lbs more than the Alumacraft MV 1756 AW 2010 at 600 lbs. That difference is meaningful if you're working within a half-ton or three-quarter-ton truck's tow rating, especially once you factor in a motor, gear, and fuel.
The power gap is worth calling out. Rated to 75 hp, the Alumacraft Classic 165 CS 2012 has a 25-hp advantage over the Alumacraft MV 1756 AW 2010's 50-hp ceiling - enough to notice on acceleration and at cruising speed, particularly with a full passenger load.
Both boats are rated for 5 passengers - a good fit for a family of four or five plus guests. Comfort at capacity is another matter; the longer hull typically means more seat options and better weight distribution.
At this size, power-to-weight ratio matters more than outright horsepower. The Alumacraft Classic 165 CS 2012 comes in at 12 lbs per hp versus 12 lbs per hp for the Alumacraft MV 1756 AW 2010. The lower the ratio the more explosive the acceleration - meaningful on a short RIB where bursts of speed, quick planing, and agility in surf or tight waterways define the experience.
Bottom line: Performance buyers should lean toward the Alumacraft Classic 165 CS 2012 and its 75-hp ceiling. If fuel economy and quieter running matter more than top-end speed, the Alumacraft MV 1756 AW 2010 with its 50-hp rating is the more economical daily driver.
General Boat Info
MakeAlumacraft
MakeAlumacraft
ModelClassic 165 CS
ModelMV 1756 AW
Model Year2012
Model Year2010
Measurements / Dimensions
Beam82 in. (2.1 m)
Beam83 in. (2.11 m)
Beam - Meters2.08
Beam - Meters2.11
Beam - Inches82
Beam - Inches83
Depth - Detail35 in. (0.89 m) To Floor: 21 in. (0.53 m)
Depth - Detailnot available
Depth - Centimeters88.9
Depth - Centimetersnot available
Depth - Inches35
Depth - Inchesnot available
Weight - Detail895 lbs. (406 kg)
Weight - Detail600 lbs. (272 kg)
Weight - kg405.96
Weight - kg272.16
Weight - lbs.895
Weight - lbs.600
Width [transom] - Detail82 in. (2.1 m)
Width [transom] - Detail56 in. (1.42 m)
Height [transom]20 in. (0.51 m)
Height [transom]21 in. (.53 m)
Length - Feet16.33
Length - Feet17
Length overall - Detail16 ft. 4 in. (5.0 m)
Length overall - Detail17 ft. (5.2 m)
Length overall - Meters4.98
Length overall - Meters5.18
Length overall - Inches196
Length overall - Inches204
Height - Detailnot available
Height - Detail24 in. (.61 m)
Height - Metersnot available
Height - Meters0.61
Height - Inchesnot available
Height - Inches24
Length - Metersnot available
Length - Meters5.2
Body / Hull
Hull materialAluminum
Hull materialAluminum
Hull thicknessBottom: 0.080 in. (2 mm) Sides: 0.065 in. (1.65 mm)
Hull thickness0.102 in. (2.6 mm)
Hull typeDeep Vee
Hull typeModified Vee
Engine and Drivetrain
Fuel tank capacity - Detail19 gal. (72 l)
Fuel tank capacity - Detailnot available
Fuel tank capacity - Liters71.92
Fuel tank capacity - Litersnot available
Fuel tank capacity - Gal19
Fuel tank capacity - Galnot available
Drive typeOutboard
Drive typeOutboard
Engine max75 hp (56 kW)
Engine max50 hp (37 kW)
Operational Info
StorageBow Livewell: 34 gal. (128 l)
Storagenot available
Maximum capacity1,280 lbs. (580 kg)
Maximum capacity1,300 lbs. (589.7 kg)
Maximum people5
Maximum people5