Alumacraft All Weld Waterfowler 16 2011 boat specs
Alumacraft
Alumacraft All Weld Waterfowler 16 2011
2011
View full specs →
VS
Alumacraft Riveted Jon 1436 2012 boat specs
Alumacraft
Alumacraft Riveted Jon 1436 2012
2012
View full specs →

Alumacraft All Weld Waterfowler 16 2011 vs Alumacraft Riveted Jon 1436 2012: Same Brand, Different Boat

The Alumacraft All Weld Waterfowler 16 2011 is a modified-V design and the Alumacraft Riveted Jon 1436 2012 is a flat-bottom design, so you're likely deciding between two noticeably different on-water experiences. Hull type shapes everything from ride quality and fuel burn to dock handling and resale trajectory.

On paper these two are close siblings in the size department - Alumacraft All Weld Waterfowler 16 2011 at 16,0 ft versus Alumacraft Riveted Jon 1436 2012 at 14,0 ft. Weight tells a clearer story for trailering families: the Alumacraft All Weld Waterfowler 16 2011 tips the scales at 525 lbs - 345 lbs more than the Alumacraft Riveted Jon 1436 2012 at 180 lbs. That difference is meaningful if you're working within a half-ton or three-quarter-ton truck's tow rating, especially once you factor in a motor, gear, and fuel.

The power gap is worth calling out. Rated to 40 hp, the Alumacraft All Weld Waterfowler 16 2011 has a 25-hp advantage over the Alumacraft Riveted Jon 1436 2012's 15-hp ceiling - enough to notice on acceleration and at cruising speed, particularly with a full passenger load.

For family outings this is probably the sharpest distinction between the two. The Alumacraft All Weld Waterfowler 16 2011 is rated for 5 passengers, while the Alumacraft Riveted Jon 1436 2012 caps at 3. If you're regularly pulling extended family or a group of friends onto the water, the extra seats on the Alumacraft All Weld Waterfowler 16 2011 could be the deciding factor.

At this size, power-to-weight ratio matters more than outright horsepower. The Alumacraft Riveted Jon 1436 2012 comes in at 12 lbs per hp versus 13 lbs per hp for the Alumacraft All Weld Waterfowler 16 2011. The lower the ratio the more explosive the acceleration - meaningful on a short RIB where bursts of speed, quick planing, and agility in surf or tight waterways define the experience.

Bottom line: Choose the Alumacraft All Weld Waterfowler 16 2011 if your priority is putting more people on the water - it handles 5 passengers and at 16,0 ft it has the deck room to back that rating up comfortably. The Alumacraft Riveted Jon 1436 2012 is the smarter pick if you want a lighter, easier-to-trailer boat rated for 3 that costs less to run day-to-day.
General Boat Info
MakeAlumacraft
MakeAlumacraft
ModelAll Weld Waterfowler 16
ModelRiveted Jon 1436
Model Year2011
Model Year2012
Measurements / Dimensions
Beam65 in.
Beam55 in.
Beam - Meters1.65
Beam - Meters1.4
Beam - Inches65
Beam - Inches55
Weight - Detail525 lbs.
Weight - Detail180 lbs.
Weight - kg238.14
Weight - kg81.65
Weight - lbs.525
Weight - lbs.180
Height - Detail20 in.
Height - Detail19 in.
Height - Meters0.51
Height - Meters0.48
Height - Inches20
Height - Inches19
Height [transom]21 in.
Height [transom]15 in.
Length - Feet16
Length - Feet14
Length overall - Detail16 ft. 0 in.
Length overall - Detail14 ft.
Length overall - Meters4.88
Length overall - Meters4.27
Length overall - Inches192
Length overall - Inches168
Body / Hull
Hull materialAluminum
Hull materialAluminum
Hull thickness0.102 in.
Hull thickness0.058 in.
Hull typeModified Vee
Hull typeFlat
Engine and Drivetrain
Fuel typeGas
Fuel typeGas
Drive typeOutboard
Drive typeOutboard
Engine max40 hp
Engine max15 hp
Operational Info
Maximum capacity1,100 lbs.
Maximum capacity605 lbs.
Maximum people5
Maximum people3

Alumacraft All Weld Waterfowler 16 2011 vs Alumacraft Riveted Jon 1436 2012 - Common Questions

Which is the larger boat - the Alumacraft All Weld Waterfowler 16 2011 or the Alumacraft Riveted Jon 1436 2012?
The Alumacraft All Weld Waterfowler 16 2011 is the longer of the two at 16,0 feet overall. The Alumacraft Riveted Jon 1436 2012 comes in at 14,0 feet, making it roughly 2,0 ft shorter - a meaningful difference in deck room and overall on-water presence.
Which is easier to trailer - the Alumacraft All Weld Waterfowler 16 2011 or the Alumacraft Riveted Jon 1436 2012?
For trailering, the Alumacraft Riveted Jon 1436 2012 has the edge at 180 lbs dry weight versus 525 lbs for the Alumacraft All Weld Waterfowler 16 2011. Add a motor (typically 300–500 lbs for an outboard in this class), gear, and a partial fuel load and the difference grows. Lighter is friendlier on smaller tow vehicles and on fuel economy while hauling.
Which boat can handle a bigger outboard?
The Alumacraft All Weld Waterfowler 16 2011 is rated to a maximum of 40 hp, giving it the larger power ceiling. The Alumacraft Riveted Jon 1436 2012 tops out at 15 hp. Keep in mind that maximum ratings are just that - matching the motor to the actual load and usage pattern usually matters more than chasing the ceiling.
How many people can each boat hold?
The Alumacraft All Weld Waterfowler 16 2011 is Coast Guard rated for 5 passengers, while the Alumacraft Riveted Jon 1436 2012 is certified for 3. Note that legal capacity and comfortable capacity aren't always the same thing - on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.
Which boat has the better power-to-weight ratio?
The Alumacraft Riveted Jon 1436 2012 has a better power-to-weight ratio at 12 lbs per hp compared to 13 lbs per hp for the Alumacraft All Weld Waterfowler 16 2011. A lower number means quicker acceleration and faster time to plane - the number that actually matters most on short, sporty boats like these.
Which boat is wider, and does it affect trailering?
The Alumacraft All Weld Waterfowler 16 2011 measures 65" wide, compared to 55" for the Alumacraft Riveted Jon 1436 2012. The US standard-width towing limit is 8’6" (102") in most states - anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.
Are the Alumacraft All Weld Waterfowler 16 2011 and Alumacraft Riveted Jon 1436 2012 from the same manufacturer?
Yes - both the Alumacraft All Weld Waterfowler 16 2011 and the Alumacraft Riveted Jon 1436 2012 are built by Alumacraft. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.