Alumacraft All-Weld MV 2072 AW 2012 boat specs
Alumacraft
Alumacraft All-Weld MV 2072 AW 2012
2012
View full specs →
VS
Alumacraft PF 175 2012 boat specs
Alumacraft
Alumacraft PF 175 2012
2012
View full specs →

Alumacraft All-Weld MV 2072 AW 2012 vs Alumacraft PF 175 2012: Same Brand, Different Boat

The Alumacraft All-Weld MV 2072 AW 2012 is a tunnel hull design and the Alumacraft PF 175 2012 is a flat-bottom design, so you're likely deciding between two noticeably different on-water experiences. Hull type shapes everything from ride quality and fuel burn to dock handling and resale trajectory.

On paper these two are close siblings in the size department - Alumacraft All-Weld MV 2072 AW 2012 at 20,0 ft versus Alumacraft PF 175 2012 at 17,4 ft. Weight tells a clearer story for trailering families: the Alumacraft All-Weld MV 2072 AW 2012 tips the scales at 1 200 lbs - 150 lbs more than the Alumacraft PF 175 2012 at 1 050 lbs. That difference is meaningful if you're working within a half-ton or three-quarter-ton truck's tow rating, especially once you factor in a motor, gear, and fuel.

The power gap is worth calling out. Rated to 90 hp, the Alumacraft PF 175 2012 has a 30-hp advantage over the Alumacraft All-Weld MV 2072 AW 2012's 60-hp ceiling - enough to notice on acceleration and at cruising speed, particularly with a full passenger load. Both carry nearly identical fuel loads - 21 gal and 21 gal - so range won't be a tiebreaker here.

For family outings this is probably the sharpest distinction between the two. The Alumacraft All-Weld MV 2072 AW 2012 is rated for 8 passengers, while the Alumacraft PF 175 2012 caps at 4. If you're regularly pulling extended family or a group of friends onto the water, the extra seats on the Alumacraft All-Weld MV 2072 AW 2012 could be the deciding factor.

Bottom line: Choose the Alumacraft All-Weld MV 2072 AW 2012 if your priority is putting more people on the water - it handles 8 passengers and at 20,0 ft it has the deck room to back that rating up comfortably. The Alumacraft PF 175 2012 is the smarter pick if you want a lighter, easier-to-trailer boat rated for 4 that costs less to run day-to-day.
General Boat Info
MakeAlumacraft
MakeAlumacraft
ModelAll-Weld MV 2072 AW
ModelPF 175
Model Year2012
Model Year2012
Measurements / Dimensions
Beam94 in.
Beam88 / 56 in. (2.24 / 1.42 m)
Beam - Meters2.39
Beam - Meters1.42
Beam - Inches94
Beam - Inches56
Weight - Detail1,200 lbs.
Weight - Detail1,050 lbs. (476.27 kg)
Weight - kg544.31
Weight - kg476.27
Weight - lbs.1200
Weight - lbs.1050
Height - Detail27 in.
Height - DetailSide Height: 23 in. (0.58 m)
Height - Meters0.69
Height - Meters0.58
Height - Inches27
Height - Inches23
Height [transom]21 in.
Height [transom]21 in. (0.53 m)
Length - Feet20
Length - Feet17.42
Length overall - Detail20 ft.
Length overall - Detail17 ft. 5 in. (5.31 m)
Length overall - Meters6.1
Length overall - Meters5.31
Length overall - Inches240
Length overall - Inches209
Width [transom] - Detailnot available
Width [transom] - Detail88 in. (2.13 m)
Body / Hull
Hull materialAluminum
Hull materialAluminum
Hull thickness0.102 in.
Hull thicknessBottom and Sides: 0.102 in. (2.6 mm)
Hull typeTunnel
Hull typeFlat
Engine and Drivetrain
Fuel tank capacity - Detail21 gal.
Fuel tank capacity - Detail21 gal. (79.5 l)
Fuel tank capacity - Liters79.49
Fuel tank capacity - Liters79.49
Fuel tank capacity - Gal21
Fuel tank capacity - Gal21
Fuel typeGas
Fuel typeGas
Drive typeOutboard
Drive typeOutboard
Engine max60 hp
Engine max90 hp (67 kW)
Operational Info
Maximum capacity2,100 lbs.
Maximum capacity1,195 lbs. (542 kg)
Maximum people8
Maximum people4
Storagenot available
StorageBow and Aft Livewells: 20 gal. ea. (75.71 l)

Alumacraft All-Weld MV 2072 AW 2012 vs Alumacraft PF 175 2012 - Common Questions

Which is the larger boat - the Alumacraft All-Weld MV 2072 AW 2012 or the Alumacraft PF 175 2012?
The Alumacraft All-Weld MV 2072 AW 2012 is the longer of the two at 20,0 feet overall. The Alumacraft PF 175 2012 comes in at 17,4 feet, making it roughly 2,6 ft shorter - a meaningful difference in deck room and overall on-water presence.
Which is easier to trailer - the Alumacraft All-Weld MV 2072 AW 2012 or the Alumacraft PF 175 2012?
For trailering, the Alumacraft PF 175 2012 has the edge at 1 050 lbs dry weight versus 1 200 lbs for the Alumacraft All-Weld MV 2072 AW 2012. Add a motor (typically 300–500 lbs for an outboard in this class), gear, and a partial fuel load and the difference grows. Lighter is friendlier on smaller tow vehicles and on fuel economy while hauling.
Which boat can handle a bigger outboard?
The Alumacraft PF 175 2012 is rated to a maximum of 90 hp, giving it the larger power ceiling. The Alumacraft All-Weld MV 2072 AW 2012 tops out at 60 hp. Keep in mind that maximum ratings are just that - matching the motor to the actual load and usage pattern usually matters more than chasing the ceiling.
How many people can each boat hold?
The Alumacraft All-Weld MV 2072 AW 2012 is Coast Guard rated for 8 passengers, while the Alumacraft PF 175 2012 is certified for 4. Note that legal capacity and comfortable capacity aren't always the same thing - on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.
Which boat is wider, and does it affect trailering?
The Alumacraft All-Weld MV 2072 AW 2012 measures 94" wide, compared to 56" for the Alumacraft PF 175 2012. The US standard-width towing limit is 8’6" (102") in most states - anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.
How do the fuel tanks compare on the Alumacraft All-Weld MV 2072 AW 2012 and Alumacraft PF 175 2012?
Both boats carry similar fuel loads - 21 gallons and 21 gallons respectively. Range will depend heavily on motor choice, throttle usage, and whether you're on flat lake water or coastal chop.
Are the Alumacraft All-Weld MV 2072 AW 2012 and Alumacraft PF 175 2012 from the same manufacturer?
Yes - both the Alumacraft All-Weld MV 2072 AW 2012 and the Alumacraft PF 175 2012 are built by Alumacraft. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.