Alumacraft All-Weld MV 1756 2011 boat specs
Alumacraft
Alumacraft All-Weld MV 1756 2011
2011
View full specs →
VS
Alumacraft MV  1648 NCS 2005 boat specs
Alumacraft
Alumacraft MV 1648 NCS 2005
2005
View full specs →

Alumacraft All-Weld MV 1756 2011 vs Alumacraft MV 1648 NCS 2005: Same Brand, Different Boat

The Alumacraft All-Weld MV 1756 2011 vs Alumacraft MV 1648 NCS 2005 comparison sits squarely in the category of decisions where specs alone won't tell the whole story: intended use, storage, and long-term ownership costs all factor in.

On paper these two are close siblings in the size department - Alumacraft All-Weld MV 1756 2011 at 17,0 ft versus Alumacraft MV 1648 NCS 2005 at 16,0 ft. Weight tells a clearer story for trailering families: the Alumacraft All-Weld MV 1756 2011 tips the scales at 600 lbs - 290 lbs more than the Alumacraft MV 1648 NCS 2005 at 310 lbs. That difference is meaningful if you're working within a half-ton or three-quarter-ton truck's tow rating, especially once you factor in a motor, gear, and fuel.

The Alumacraft All-Weld MV 1756 2011 carries a rated maximum of 50 hp. Engine data for the Alumacraft MV 1648 NCS 2005 wasn't available in our records - check the manufacturer's spec sheet before sizing a motor.

Both boats are rated for 5 passengers - a good fit for a family of four or five plus guests. Comfort at capacity is another matter; the longer hull typically means more seat options and better weight distribution.

Bottom line: The Alumacraft All-Weld MV 1756 2011 and Alumacraft MV 1648 NCS 2005 are closely matched on the specs that matter most. Test-ride both on the water you actually use, check current dealer pricing, and factor in long-term service access before you sign.
General Boat Info
MakeAlumacraft
MakeAlumacraft
ModelAll-Weld MV 1756
ModelMV 1648 NCS
Model Year2011
Model Year2005
Measurements / Dimensions
Beam83 in.
Beam70 in.
Beam - Meters2.11
Beam - Meters1.78
Beam - Inches83
Beam - Inches70
Weight - Detail600 lbs.
Weight - Detail310 lbs.
Weight - kg272.16
Weight - kg140.61
Weight - lbs.600
Weight - lbs.310
Height - Detail24 in.
Height - Detail21 in.
Height - Meters0.61
Height - Meters0.53
Height - Inches24
Height - Inches21
Height [transom]21 in.
Height [transom]15 in. or 20 in.
Length - Feet17
Length - Feet16
Length overall - Detail17 ft. 0 in.
Length overall - Detail16 ft. 0 in.
Length overall - Meters5.18
Length overall - Meters4.88
Length overall - Inches204
Length overall - Inches192
Width [transom] - Detailnot available
Width [transom] - Detail48 in.
Body / Hull
Hull materialAluminum
Hull materialAluminum
Hull thickness0.102 in.
Hull thicknessBottom/sides: .070 in.
Hull typeModified Vee
Hull typenot available
Engine and Drivetrain
Fuel typeGas
Fuel typenot available
Drive typeOutboard
Drive typenot available
Engine max50 hp
Engine maxnot available
Engine/s standardnot available
Engine/s standard40 hp
Operational Info
Maximum capacity1,300 lbs.
Maximum capacitynot available
Maximum people5
Maximum people5

Alumacraft All-Weld MV 1756 2011 vs Alumacraft MV 1648 NCS 2005 - Common Questions

Which is the larger boat - the Alumacraft All-Weld MV 1756 2011 or the Alumacraft MV 1648 NCS 2005?
The Alumacraft All-Weld MV 1756 2011 is the longer of the two at 17,0 feet overall. The Alumacraft MV 1648 NCS 2005 comes in at 16,0 feet, making it roughly 1,0 ft shorter - a meaningful difference in deck room and overall on-water presence.
Which is easier to trailer - the Alumacraft All-Weld MV 1756 2011 or the Alumacraft MV 1648 NCS 2005?
For trailering, the Alumacraft MV 1648 NCS 2005 has the edge at 310 lbs dry weight versus 600 lbs for the Alumacraft All-Weld MV 1756 2011. Add a motor (typically 300–500 lbs for an outboard in this class), gear, and a partial fuel load and the difference grows. Lighter is friendlier on smaller tow vehicles and on fuel economy while hauling.
What is the maximum horsepower rating for these boats?
The Alumacraft All-Weld MV 1756 2011 has a documented max rating of 50 hp. Engine specifications for the Alumacraft MV 1648 NCS 2005 were not available in our database - check the OEM spec sheet or manufacturer's website for confirmation.
How many people can each boat hold?
The Alumacraft All-Weld MV 1756 2011 is Coast Guard rated for 5 passengers, while the Alumacraft MV 1648 NCS 2005 is certified for 5. Note that legal capacity and comfortable capacity aren't always the same thing - on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.
Which boat is wider, and does it affect trailering?
The Alumacraft All-Weld MV 1756 2011 measures 83" wide, compared to 70" for the Alumacraft MV 1648 NCS 2005. The US standard-width towing limit is 8’6" (102") in most states - anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.
Are the Alumacraft All-Weld MV 1756 2011 and Alumacraft MV 1648 NCS 2005 from the same manufacturer?
Yes - both the Alumacraft All-Weld MV 1756 2011 and the Alumacraft MV 1648 NCS 2005 are built by Alumacraft. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.