Alumacraft All Weld MV 1650 2012 boat specs
Alumacraft
Alumacraft All Weld MV 1650 2012
2012
View full specs →
VS
Alumacraft V14 2003 boat specs
Alumacraft
Alumacraft V14 2003
2003
View full specs →

Alumacraft All Weld MV 1650 2012 vs Alumacraft V14 2003: Same Brand, Different Boat

The Alumacraft All Weld MV 1650 2012 vs Alumacraft V14 2003 comparison sits squarely in the category of decisions where specs alone won't tell the whole story: intended use, storage, and long-term ownership costs all factor in.

Both boats share a closely matched power ceiling - 40 hp for the Alumacraft All Weld MV 1650 2012 and 25 hp for the Alumacraft V14 2003. Real-world performance will come down more to which motor is actually bolted on, its load at the time, and whether it's a 4-stroke or 2-stroke setup.

Both boats are rated for 5 passengers - a good fit for a family of four or five plus guests. Comfort at capacity is another matter; the longer hull typically means more seat options and better weight distribution.

Bottom line: The Alumacraft All Weld MV 1650 2012 and Alumacraft V14 2003 are closely matched on the specs that matter most. Test-ride both on the water you actually use, check current dealer pricing, and factor in long-term service access before you sign.
General Boat Info
MakeAlumacraft
MakeAlumacraft
ModelAll Weld MV 1650
ModelV14
Model Year2012
Model Year2003
Measurements / Dimensions
Beam74 in.
Beam68 in.
Beam - Meters1.88
Beam - Meters1.73
Beam - Inches74
Beam - Inches68
Weight - Detail485 lbs.
Weight - Detail245 lbs.
Weight - kg219.99
Weight - kg111.13
Weight - lbs.485
Weight - lbs.245
Height - Detail22 in.
Height - Detail30 in.
Height - Meters0.56
Height - Meters0.76
Height - Inches22
Height - Inches30
Height [transom]21 in.
Height [transom]15/20 in. 25 in. available on special orders
Length - Feet16
Length - Feetnot available
Length overall - Detail16 ft.
Length overall - Detail14 ft. 3 in.
Length overall - Meters4.88
Length overall - Meters4.34
Length overall - Inches192
Length overall - Inches171
Draft [drive up] - Detailnot available
Draft [drive up] - DetailN/A
Body / Hull
Hull materialAluminum
Hull materialAluminum
Hull thickness0.102 in.
Hull thicknessnot available
Hull typeModified Vee
Hull typenot available
Engine and Drivetrain
Fuel typeGas
Fuel typenot available
Drive typeOutboard
Drive typenot available
Engine max40 hp With Max Persons: 60 hp
Engine max25 HP
Fuel tank capacity - Detailnot available
Fuel tank capacity - DetailN/A
Operational Info
Maximum capacity1,100 lbs.
Maximum capacitynot available
Maximum people5
Maximum people5 persons
Water capacitynot available
Water capacityN/A
Trailer Info
Trailer - Detailnot available
Trailer - DetailN/A

Alumacraft All Weld MV 1650 2012 vs Alumacraft V14 2003 - Common Questions

Which is easier to trailer - the Alumacraft All Weld MV 1650 2012 or the Alumacraft V14 2003?
For trailering, the Alumacraft V14 2003 has the edge at 245 lbs dry weight versus 485 lbs for the Alumacraft All Weld MV 1650 2012. Add a motor (typically 300–500 lbs for an outboard in this class), gear, and a partial fuel load and the difference grows. Lighter is friendlier on smaller tow vehicles and on fuel economy while hauling.
Which boat can handle a bigger outboard?
The Alumacraft All Weld MV 1650 2012 is rated to a maximum of 40 hp, giving it the larger power ceiling. The Alumacraft V14 2003 tops out at 25 hp. Keep in mind that maximum ratings are just that - matching the motor to the actual load and usage pattern usually matters more than chasing the ceiling.
How many people can each boat hold?
The Alumacraft All Weld MV 1650 2012 is Coast Guard rated for 5 passengers, while the Alumacraft V14 2003 is certified for 5. Note that legal capacity and comfortable capacity aren't always the same thing - on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.
Which boat is wider, and does it affect trailering?
The Alumacraft All Weld MV 1650 2012 measures 74" wide, compared to 68" for the Alumacraft V14 2003. The US standard-width towing limit is 8’6" (102") in most states - anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.
Are the Alumacraft All Weld MV 1650 2012 and Alumacraft V14 2003 from the same manufacturer?
Yes - both the Alumacraft All Weld MV 1650 2012 and the Alumacraft V14 2003 are built by Alumacraft. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.