Alumacraft All Weld MV 1650 2012 vs Alumacraft Magnum 175 CS 2004 - Boat Spec Comparison

Q: Which is easier to trailer — the Alumacraft All Weld MV 1650 2012 or the Alumacraft Magnum 175 CS 2004?

For trailering, the Alumacraft All Weld MV 1650 2012 has the edge at 485 lbs dry weight versus 1 175 lbs for the Alumacraft Magnum 175 CS 2004. Add a motor (typically 300–500 lbs for an outboard in this class), gear, and a partial fuel load and the difference grows. Lighter is friendlier on smaller tow vehicles and on fuel economy while hauling.

Q: Which boat can handle a bigger outboard?

The Alumacraft Magnum 175 CS 2004 is rated to a maximum of 140 hp, giving it the larger power ceiling. The Alumacraft All Weld MV 1650 2012 tops out at 40 hp. Keep in mind that maximum ratings are just that — matching the motor to the actual load and usage pattern usually matters more than chasing the ceiling.

Q: How many people can each boat hold?

The Alumacraft All Weld MV 1650 2012 is Coast Guard rated for 5 passengers, while the Alumacraft Magnum 175 CS 2004 is certified for 5. Note that legal capacity and comfortable capacity aren't always the same thing — on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.

Q: Which boat is wider, and does it affect trailering?

The Alumacraft Magnum 175 CS 2004 measures 88" wide, compared to 74" for the Alumacraft All Weld MV 1650 2012. The US standard-width towing limit is 8’6" (102") in most states — anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.

Q: Are the Alumacraft All Weld MV 1650 2012 and Alumacraft Magnum 175 CS 2004 from the same manufacturer?

Yes — both the Alumacraft All Weld MV 1650 2012 and the Alumacraft Magnum 175 CS 2004 are built by Alumacraft. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.

Boat Comparison

Alumacraft All Weld MV 1650 2012 vs Alumacraft Magnum 175 CS 2004

Alumacraft

Alumacraft All Weld MV 1650 2012

2012

View full specs →

Alumacraft

Alumacraft Magnum 175 CS 2004

2004

View full specs →

Detailed Evaluation & Buyer Recommendation

Alumacraft All Weld MV 1650 2012 vs Alumacraft Magnum 175 CS 2004 — Same Brand, Different Boat

The Alumacraft All Weld MV 1650 2012 vs Alumacraft Magnum 175 CS 2004 comparison sits squarely in the category of decisions where specs alone won't tell the whole story — intended use, storage, and long-term ownership costs all factor in.

The power gap is worth calling out. Rated to 140 hp, the Alumacraft Magnum 175 CS 2004 has a 100-hp advantage over the Alumacraft All Weld MV 1650 2012's 40-hp ceiling — enough to notice on acceleration and at cruising speed, particularly with a full passenger load.

Both boats are rated for 5 passengers — a good fit for a family of four or five plus guests. Comfort at capacity is another matter; the longer hull typically means more seat options and better weight distribution.

Bottom line: Performance buyers should lean toward the Alumacraft Magnum 175 CS 2004 and its 140-hp ceiling. If fuel economy and quieter running matter more than top-end speed, the Alumacraft All Weld MV 1650 2012 with its 40-hp rating is the more economical daily driver.

General Boat Info

MakeAlumacraft

ModelAll Weld MV 165

ModelMagnum 175 CS

Model Year2012

Model Year2004

Measurements / Dimensions

Beam74 in

Beam88 in

Beam - Meters1.88

Beam - Meters2.24

Beam - Inches74

Beam - Inches88

Weight - Detail485 lbs

Weight - Detail1175 lbs

Weight - kg219.99

Weight - kg532.97

Weight - lbs.485

Weight - lbs.1175

Height - Detail22 in

Height - Detail41 in

Height - Meters0.56

Height - Meters1.04

Height - Inches22

Height - Inches41

Height [transom]21 in

Height [transom]20 in. Width: 88 in

Length - Feet16

Length - Feetnot available

Length overall - Detail16 ft

Length overall - Detail17 ft. 11 in

Length overall - Meters4.88

Length overall - Meters5.46

Length overall - Inches192

Length overall - Inches215

Draft [drive up] - Detailnot available

Draft [drive up] - Detailn/a

Body / Hull

Hull materialAluminum

Hull thickness0.102 in

Hull thicknessnot available

Hull typeModified Vee

Hull typenot available

Engine and Drivetrain

Fuel typeGas

Fuel typenot available

Drive typeOutboard

Drive typenot available

Engine max40 hp With Max Persons: 60 hp

Engine max140 hp

Fuel tank capacity - Detailnot available

Fuel tank capacity - Detail34 gal

Fuel tank capacity - Litersnot available

Fuel tank capacity - Liters128.7

Fuel tank capacity - Galnot available

Fuel tank capacity - Gal34

Operational Info

Maximum capacity1,100 lbs

Maximum capacitynot available

Maximum people5

Maximum people5 persons

Water capacitynot available

Water capacityn/a

Trailer Info

Trailer - Detailnot available

Trailer - Detailn/a

Alumacraft All Weld MV 1650 2012 vs Alumacraft Magnum 175 CS 2004 — Common Questions

Which is easier to trailer — the Alumacraft All Weld MV 1650 2012 or the Alumacraft Magnum 175 CS 2004?

For trailering, the Alumacraft All Weld MV 1650 2012 has the edge at 485 lbs dry weight versus 1 175 lbs for the Alumacraft Magnum 175 CS 2004. Add a motor (typically 300–500 lbs for an outboard in this class), gear, and a partial fuel load and the difference grows. Lighter is friendlier on smaller tow vehicles and on fuel economy while hauling.

Which boat can handle a bigger outboard?

The Alumacraft Magnum 175 CS 2004 is rated to a maximum of 140 hp, giving it the larger power ceiling. The Alumacraft All Weld MV 1650 2012 tops out at 40 hp. Keep in mind that maximum ratings are just that — matching the motor to the actual load and usage pattern usually matters more than chasing the ceiling.

How many people can each boat hold?

The Alumacraft All Weld MV 1650 2012 is Coast Guard rated for 5 passengers, while the Alumacraft Magnum 175 CS 2004 is certified for 5. Note that legal capacity and comfortable capacity aren't always the same thing — on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.

Which boat is wider, and does it affect trailering?

The Alumacraft Magnum 175 CS 2004 measures 88" wide, compared to 74" for the Alumacraft All Weld MV 1650 2012. The US standard-width towing limit is 8’6" (102") in most states — anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.

Are the Alumacraft All Weld MV 1650 2012 and Alumacraft Magnum 175 CS 2004 from the same manufacturer?

Yes — both the Alumacraft All Weld MV 1650 2012 and the Alumacraft Magnum 175 CS 2004 are built by Alumacraft. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.

← Alumacraft All Weld MV 1650 2012 full specs ← Alumacraft Magnum 175 CS 2004 full specs