Alumacraft All Weld MV 1650 2011 boat specs
Alumacraft
Alumacraft All Weld MV 1650 2011
2011
View full specs →
VS
Alumacraft Fisherman 145 CS 2011 boat specs
Alumacraft
Alumacraft Fisherman 145 CS 2011
2011
View full specs →

Alumacraft All Weld MV 1650 2011 vs Alumacraft Fisherman 145 CS 2011: Same Brand, Different Boat

The Alumacraft All Weld MV 1650 2011 is a modified-V design and the Alumacraft Fisherman 145 CS 2011 is a flat-bottom design, so you're likely deciding between two noticeably different on-water experiences. Hull type shapes everything from ride quality and fuel burn to dock handling and resale trajectory.

On paper these two are close siblings in the size department - Alumacraft All Weld MV 1650 2011 at 16,0 ft versus Alumacraft Fisherman 145 CS 2011 at 14,8 ft. Weight tells a clearer story for trailering families: the Alumacraft Fisherman 145 CS 2011 tips the scales at 602 lbs - 117 lbs less than the Alumacraft All Weld MV 1650 2011 at 485 lbs. That difference is meaningful if you're working within a half-ton or three-quarter-ton truck's tow rating, especially once you factor in a motor, gear, and fuel.

Both boats share a closely matched power ceiling - 40 hp for the Alumacraft All Weld MV 1650 2011 and 30 hp for the Alumacraft Fisherman 145 CS 2011. Real-world performance will come down more to which motor is actually bolted on, its load at the time, and whether it's a 4-stroke or 2-stroke setup.

For family outings this is probably the sharpest distinction between the two. The Alumacraft All Weld MV 1650 2011 is rated for 5 passengers, while the Alumacraft Fisherman 145 CS 2011 caps at 4. If you're regularly pulling extended family or a group of friends onto the water, the extra seats on the Alumacraft All Weld MV 1650 2011 could be the deciding factor.

At this size, power-to-weight ratio matters more than outright horsepower. The Alumacraft All Weld MV 1650 2011 comes in at 12 lbs per hp versus 20 lbs per hp for the Alumacraft Fisherman 145 CS 2011. The lower the ratio the more explosive the acceleration - meaningful on a short RIB where bursts of speed, quick planing, and agility in surf or tight waterways define the experience.

Bottom line: Choose the Alumacraft All Weld MV 1650 2011 if your priority is putting more people on the water - it handles 5 passengers and at 16,0 ft it has the deck room to back that rating up comfortably. The Alumacraft Fisherman 145 CS 2011 is the smarter pick if you want a lighter, easier-to-trailer boat rated for 4 that costs less to run day-to-day.
General Boat Info
MakeAlumacraft
MakeAlumacraft
ModelAll Weld MV 1650
ModelFisherman 145 CS
Model Year2011
Model Year2011
Measurements / Dimensions
Beam74 in.
Beam73 in. (1.85 m)
Beam - Meters1.88
Beam - Meters1.85
Beam - Inches74
Beam - Inches73
Weight - Detail485 lbs.
Weight - Detail602 lbs. (273 kg)
Weight - kg219.99
Weight - kg273.06
Weight - lbs.485
Weight - lbs.602
Height - Detail22 in.
Height - Detail32 in. (0.84 m) To Floor: 20 in. (0.55 m)
Height - Meters0.56
Height - Meters0.81
Height - Inches22
Height - Inches32
Height [transom]21 in.
Height [transom]20 in. (0.55 m)
Length - Feet16
Length - Feet14.83
Length overall - Detail16 ft. 0 in.
Length overall - Detail14 ft. 10 in. (4.5 m)
Length overall - Meters4.88
Length overall - Meters4.52
Length overall - Inches192
Length overall - Inches178
Width [transom] - Detailnot available
Width [transom] - Detail67 in. (1.7 m)
Body / Hull
Hull materialAluminum
Hull materialAluminum
Hull thickness0.102 in.
Hull thicknessBottom: 0.070 in. (1.78 mm) Sides: 0.065 in. (1.65 mm)
Hull typeModified Vee
Hull typeFlat
Engine and Drivetrain
Fuel typeGas
Fuel typeGas
Drive typeOutboard
Drive typeOutboard
Engine max40 hp
Engine max30 hp (19 kW)
Operational Info
Maximum capacity1,100 lbs.
Maximum capacity925 lbs. (420 kg)
Maximum people5
Maximum people4
Storagenot available
StorageSide Livewell: 13 gal. (49 l)

Alumacraft All Weld MV 1650 2011 vs Alumacraft Fisherman 145 CS 2011 - Common Questions

Which is the larger boat - the Alumacraft All Weld MV 1650 2011 or the Alumacraft Fisherman 145 CS 2011?
The Alumacraft All Weld MV 1650 2011 is the longer of the two at 16,0 feet overall. The Alumacraft Fisherman 145 CS 2011 comes in at 14,8 feet, making it roughly 1,2 ft shorter - a meaningful difference in deck room and overall on-water presence.
Which is easier to trailer - the Alumacraft All Weld MV 1650 2011 or the Alumacraft Fisherman 145 CS 2011?
For trailering, the Alumacraft All Weld MV 1650 2011 has the edge at 485 lbs dry weight versus 602 lbs for the Alumacraft Fisherman 145 CS 2011. Add a motor (typically 300–500 lbs for an outboard in this class), gear, and a partial fuel load and the difference grows. Lighter is friendlier on smaller tow vehicles and on fuel economy while hauling.
Which boat can handle a bigger outboard?
The Alumacraft All Weld MV 1650 2011 is rated to a maximum of 40 hp, giving it the larger power ceiling. The Alumacraft Fisherman 145 CS 2011 tops out at 30 hp. Keep in mind that maximum ratings are just that - matching the motor to the actual load and usage pattern usually matters more than chasing the ceiling.
How many people can each boat hold?
The Alumacraft All Weld MV 1650 2011 is Coast Guard rated for 5 passengers, while the Alumacraft Fisherman 145 CS 2011 is certified for 4. Note that legal capacity and comfortable capacity aren't always the same thing - on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.
Which boat has the better power-to-weight ratio?
The Alumacraft All Weld MV 1650 2011 has a better power-to-weight ratio at 12 lbs per hp compared to 20 lbs per hp for the Alumacraft Fisherman 145 CS 2011. A lower number means quicker acceleration and faster time to plane - the number that actually matters most on short, sporty boats like these.
Which boat is wider, and does it affect trailering?
The Alumacraft All Weld MV 1650 2011 measures 74" wide, compared to 73" for the Alumacraft Fisherman 145 CS 2011. The US standard-width towing limit is 8’6" (102") in most states - anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.
Are the Alumacraft All Weld MV 1650 2011 and Alumacraft Fisherman 145 CS 2011 from the same manufacturer?
Yes - both the Alumacraft All Weld MV 1650 2011 and the Alumacraft Fisherman 145 CS 2011 are built by Alumacraft. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.