Alumacraft All Weld MV 1650 SC 2012 vs Alumacraft MV 1450 AW 2002 - Boat Spec Comparison

Q: Which is easier to trailer — the Alumacraft All Weld MV 1650 SC 2012 or the Alumacraft MV 1450 AW 2002?

For trailering, the Alumacraft All Weld MV 1650 SC 2012 has the edge at 68 lbs dry weight versus 265 lbs for the Alumacraft MV 1450 AW 2002. Add a motor (typically 300–500 lbs for an outboard in this class), gear, and a partial fuel load and the difference grows. Lighter is friendlier on smaller tow vehicles and on fuel economy while hauling.

Q: Which boat can handle a bigger outboard?

The Alumacraft All Weld MV 1650 SC 2012 is rated to a maximum of 60 hp, giving it the larger power ceiling. The Alumacraft MV 1450 AW 2002 tops out at 30 hp. Keep in mind that maximum ratings are just that — matching the motor to the actual load and usage pattern usually matters more than chasing the ceiling.

Q: How many people can each boat hold?

The Alumacraft All Weld MV 1650 SC 2012 is Coast Guard rated for 5 passengers, while the Alumacraft MV 1450 AW 2002 is certified for 5. Note that legal capacity and comfortable capacity aren't always the same thing — on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.

Q: Do these boats require an oversize trailer permit to tow on US highways?

Both the Alumacraft All Weld MV 1650 SC 2012 and Alumacraft MV 1450 AW 2002 share an 74 in beam — meaning both sit right at the 8’6" threshold that most US states use for standard-width loads. In most states you can tow at that width without a special permit, but regulations vary. Always check the rules for your state and any states you'll be passing through before your first long haul.

Q: Are the Alumacraft All Weld MV 1650 SC 2012 and Alumacraft MV 1450 AW 2002 from the same manufacturer?

Yes — both the Alumacraft All Weld MV 1650 SC 2012 and the Alumacraft MV 1450 AW 2002 are built by Alumacraft. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.

Boat Comparison

Alumacraft All Weld MV 1650 SC 2012 vs Alumacraft MV 1450 AW 2002

Alumacraft

Alumacraft All Weld MV 1650 SC 2012

2012

View full specs →

Alumacraft

Alumacraft MV 1450 AW 2002

2002

View full specs →

Detailed Evaluation & Buyer Recommendation

Alumacraft All Weld MV 1650 SC 2012 vs Alumacraft MV 1450 AW 2002 — Same Brand, Different Boat

The Alumacraft All Weld MV 1650 SC 2012 vs Alumacraft MV 1450 AW 2002 comparison sits squarely in the category of decisions where specs alone won't tell the whole story — intended use, storage, and long-term ownership costs all factor in.

The power gap is worth calling out. Rated to 60 hp, the Alumacraft All Weld MV 1650 SC 2012 has a 30-hp advantage over the Alumacraft MV 1450 AW 2002's 30-hp ceiling — enough to notice on acceleration and at cruising speed, particularly with a full passenger load.

Both boats are rated for 5 passengers — a good fit for a family of four or five plus guests. Comfort at capacity is another matter; the longer hull typically means more seat options and better weight distribution.

Bottom line: Performance buyers should lean toward the Alumacraft All Weld MV 1650 SC 2012 and its 60-hp ceiling. If fuel economy and quieter running matter more than top-end speed, the Alumacraft MV 1450 AW 2002 with its 30-hp rating is the more economical daily driver.

General Boat Info

MakeAlumacraft

ModelAll Weld MV 1650 SC

ModelMV 1450 AW

Model Year2012

Model Year2002

Measurements / Dimensions

Beam74 in

Beam - Meters1.88

Beam - Inches74

Weight - Detail680 lbs

Weight - Detail265 lbs

Weight - kg308.44

Weight - kg120.2

Weight - lbs.68

Weight - lbs.265

Height - Detail22 in

Height - Meters0.56

Height - Inches22

Height [transom]21 in

Height [transom]20 in

Length - Feet16

Length - Feetnot available

Length overall - Detail16 ft

Length overall - Detail14 ft

Length overall - Meters4.88

Length overall - Meters4.27

Length overall - Inches192

Length overall - Inches168

Body / Hull

Hull materialAluminum

Hull thickness0.102 in

Hull thicknessnot available

Hull typeModified Vee

Hull typenot available

Engine and Drivetrain

Fuel typeGas

Fuel typenot available

Drive typeOutboard

Drive typenot available

Engine max60 hp

Engine max30 hp w/Tiller Steering; 40 hp w/Console Steering

Operational Info

Maximum capacity1,100 lbs

Maximum capacitynot available

Maximum people5

Maximum people5 persons

Alumacraft All Weld MV 1650 SC 2012 vs Alumacraft MV 1450 AW 2002 — Common Questions

Which is easier to trailer — the Alumacraft All Weld MV 1650 SC 2012 or the Alumacraft MV 1450 AW 2002?

For trailering, the Alumacraft All Weld MV 1650 SC 2012 has the edge at 68 lbs dry weight versus 265 lbs for the Alumacraft MV 1450 AW 2002. Add a motor (typically 300–500 lbs for an outboard in this class), gear, and a partial fuel load and the difference grows. Lighter is friendlier on smaller tow vehicles and on fuel economy while hauling.

Which boat can handle a bigger outboard?

The Alumacraft All Weld MV 1650 SC 2012 is rated to a maximum of 60 hp, giving it the larger power ceiling. The Alumacraft MV 1450 AW 2002 tops out at 30 hp. Keep in mind that maximum ratings are just that — matching the motor to the actual load and usage pattern usually matters more than chasing the ceiling.

How many people can each boat hold?

The Alumacraft All Weld MV 1650 SC 2012 is Coast Guard rated for 5 passengers, while the Alumacraft MV 1450 AW 2002 is certified for 5. Note that legal capacity and comfortable capacity aren't always the same thing — on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.

Do these boats require an oversize trailer permit to tow on US highways?

Both the Alumacraft All Weld MV 1650 SC 2012 and Alumacraft MV 1450 AW 2002 share an 74 in beam — meaning both sit right at the 8’6" threshold that most US states use for standard-width loads. In most states you can tow at that width without a special permit, but regulations vary. Always check the rules for your state and any states you'll be passing through before your first long haul.

Are the Alumacraft All Weld MV 1650 SC 2012 and Alumacraft MV 1450 AW 2002 from the same manufacturer?

Yes — both the Alumacraft All Weld MV 1650 SC 2012 and the Alumacraft MV 1450 AW 2002 are built by Alumacraft. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.

← Alumacraft All Weld MV 1650 SC 2012 full specs ← Alumacraft MV 1450 AW 2002 full specs