Alumacraft All Weld MV 1650 SC 2012 boat specs
Alumacraft
Alumacraft All Weld MV 1650 SC 2012
2012
View full specs →
VS
Alumacraft Competitor 175 Tiller 2012 boat specs
Alumacraft
Alumacraft Competitor 175 Tiller 2012
2012
View full specs →

Alumacraft All Weld MV 1650 SC 2012 vs Alumacraft Competitor 175 Tiller 2012: Same Brand, Different Boat

The Alumacraft All Weld MV 1650 SC 2012 is a modified-V design and the Alumacraft Competitor 175 Tiller 2012 is a deep-V design, so you're likely deciding between two noticeably different on-water experiences. Hull type shapes everything from ride quality and fuel burn to dock handling and resale trajectory.

On paper these two are close siblings in the size department - Alumacraft All Weld MV 1650 SC 2012 at 16,0 ft versus Alumacraft Competitor 175 Tiller 2012 at 17,7 ft. Weight tells a clearer story for trailering families: the Alumacraft Competitor 175 Tiller 2012 tips the scales at 1 160 lbs - 480 lbs less than the Alumacraft All Weld MV 1650 SC 2012 at 680 lbs. That difference is meaningful if you're working within a half-ton or three-quarter-ton truck's tow rating, especially once you factor in a motor, gear, and fuel.

Both boats share a closely matched power ceiling - 60 hp for the Alumacraft All Weld MV 1650 SC 2012 and 75 hp for the Alumacraft Competitor 175 Tiller 2012. Real-world performance will come down more to which motor is actually bolted on, its load at the time, and whether it's a 4-stroke or 2-stroke setup.

For family outings this is probably the sharpest distinction between the two. The Alumacraft Competitor 175 Tiller 2012 is rated for 6 passengers, while the Alumacraft All Weld MV 1650 SC 2012 caps at 5. If you're regularly pulling extended family or a group of friends onto the water, the extra seats on the Alumacraft Competitor 175 Tiller 2012 could be the deciding factor.

At this size, power-to-weight ratio matters more than outright horsepower. The Alumacraft All Weld MV 1650 SC 2012 comes in at 11 lbs per hp versus 16 lbs per hp for the Alumacraft Competitor 175 Tiller 2012. The lower the ratio the more explosive the acceleration - meaningful on a short RIB where bursts of speed, quick planing, and agility in surf or tight waterways define the experience.

Bottom line: Choose the Alumacraft Competitor 175 Tiller 2012 if your priority is putting more people on the water - it handles 6 passengers and at 17,7 ft it has the deck room to back that rating up comfortably. The Alumacraft All Weld MV 1650 SC 2012 is the smarter pick if you want a lighter, easier-to-trailer boat rated for 5 that costs less to run day-to-day.
General Boat Info
MakeAlumacraft
MakeAlumacraft
ModelAll Weld MV 1650 SC
ModelCompetitor 175 Tiller
Model Year2012
Model Year2012
Measurements / Dimensions
Beam74 in.
Beam95 in. (2.41 m)
Beam - Meters1.88
Beam - Meters2.41
Beam - Inches74
Beam - Inches95
Weight - Detail680 lbs.
Weight - Detail1,160 lbs. (526 kg)
Weight - kg308.44
Weight - kg526.17
Weight - lbs.680
Weight - lbs.1160
Height - Detail22 in.
Height - Detailnot available
Height - Meters0.56
Height - Metersnot available
Height - Inches22
Height - Inchesnot available
Height [transom]21 in.
Height [transom]25 in. (0.64 m)
Length - Feet16
Length - Feet17.67
Length overall - Detail16 ft.
Length overall - Detail17 ft. 8 in. (5.3 m)
Length overall - Meters4.88
Length overall - Meters5.38
Length overall - Inches192
Length overall - Inches212
Depth - Detailnot available
Depth - Detail43 in. (1.09 m) To Floor: 23 in. (0.58 m)
Depth - Centimetersnot available
Depth - Centimeters109.22
Depth - Inchesnot available
Depth - Inches43
Width [transom] - Detailnot available
Width [transom] - Detail93 in. (2.36 m)
Body / Hull
Hull materialAluminum
Hull materialAluminum
Hull thickness0.102 in.
Hull thicknessSide: 0.080 in. (2 mm)
Hull typeModified Vee
Hull typeDeep Vee
Engine and Drivetrain
Fuel typeGas
Fuel typeGas
Drive typeOutboard
Drive typeOutboard
Engine max60 hp
Engine max75 hp (56 kW)
Fuel tank capacity - Detailnot available
Fuel tank capacity - Detail35 gal. (132.5 l)
Fuel tank capacity - Litersnot available
Fuel tank capacity - Liters132.49
Fuel tank capacity - Galnot available
Fuel tank capacity - Gal35
Operational Info
Maximum capacity1,100 lbs.
Maximum capacity1,300 lbs. (589 kg)
Maximum people5
Maximum people6
Storagenot available
StorageBow Livewell: 22 gal. (83.3 l) Aft Livewell: 21 gal. (79.5 l)

Alumacraft All Weld MV 1650 SC 2012 vs Alumacraft Competitor 175 Tiller 2012 - Common Questions

Which is the larger boat - the Alumacraft All Weld MV 1650 SC 2012 or the Alumacraft Competitor 175 Tiller 2012?
The Alumacraft Competitor 175 Tiller 2012 is the longer of the two at 17,7 feet overall. The Alumacraft All Weld MV 1650 SC 2012 comes in at 16,0 feet, making it roughly 1,7 ft shorter - a meaningful difference in deck room and overall on-water presence.
Which is easier to trailer - the Alumacraft All Weld MV 1650 SC 2012 or the Alumacraft Competitor 175 Tiller 2012?
For trailering, the Alumacraft All Weld MV 1650 SC 2012 has the edge at 680 lbs dry weight versus 1 160 lbs for the Alumacraft Competitor 175 Tiller 2012. Add a motor (typically 300–500 lbs for an outboard in this class), gear, and a partial fuel load and the difference grows. Lighter is friendlier on smaller tow vehicles and on fuel economy while hauling.
Which boat can handle a bigger outboard?
The Alumacraft Competitor 175 Tiller 2012 is rated to a maximum of 75 hp, giving it the larger power ceiling. The Alumacraft All Weld MV 1650 SC 2012 tops out at 60 hp. Keep in mind that maximum ratings are just that - matching the motor to the actual load and usage pattern usually matters more than chasing the ceiling.
How many people can each boat hold?
The Alumacraft All Weld MV 1650 SC 2012 is Coast Guard rated for 5 passengers, while the Alumacraft Competitor 175 Tiller 2012 is certified for 6. Note that legal capacity and comfortable capacity aren't always the same thing - on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.
Which boat has the better power-to-weight ratio?
The Alumacraft All Weld MV 1650 SC 2012 has a better power-to-weight ratio at 11 lbs per hp compared to 16 lbs per hp for the Alumacraft Competitor 175 Tiller 2012. A lower number means quicker acceleration and faster time to plane - the number that actually matters most on short, sporty boats like these.
Which boat is wider, and does it affect trailering?
The Alumacraft Competitor 175 Tiller 2012 measures 95" wide, compared to 74" for the Alumacraft All Weld MV 1650 SC 2012. The US standard-width towing limit is 8’6" (102") in most states - anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.
Are the Alumacraft All Weld MV 1650 SC 2012 and Alumacraft Competitor 175 Tiller 2012 from the same manufacturer?
Yes - both the Alumacraft All Weld MV 1650 SC 2012 and the Alumacraft Competitor 175 Tiller 2012 are built by Alumacraft. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.