Alumacraft All Weld MV 1650 SC 2011 vs Alumacraft Navigator 165 CS 2003 - Boat Spec Comparison

Q: Which is easier to trailer — the Alumacraft All Weld MV 1650 SC 2011 or the Alumacraft Navigator 165 CS 2003?

For trailering, the Alumacraft All Weld MV 1650 SC 2011 has the edge at 68 lbs dry weight versus 88 lbs for the Alumacraft Navigator 165 CS 2003. Add a motor (typically 300–500 lbs for an outboard in this class), gear, and a partial fuel load and the difference grows. Lighter is friendlier on smaller tow vehicles and on fuel economy while hauling.

Q: Which boat can handle a bigger outboard?

The Alumacraft Navigator 165 CS 2003 is rated to a maximum of 75 hp, giving it the larger power ceiling. The Alumacraft All Weld MV 1650 SC 2011 tops out at 60 hp. Keep in mind that maximum ratings are just that — matching the motor to the actual load and usage pattern usually matters more than chasing the ceiling.

Q: How many people can each boat hold?

The Alumacraft All Weld MV 1650 SC 2011 is Coast Guard rated for 5 passengers, while the Alumacraft Navigator 165 CS 2003 is certified for 5. Note that legal capacity and comfortable capacity aren't always the same thing — on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.

Q: Which boat is wider, and does it affect trailering?

The Alumacraft Navigator 165 CS 2003 measures 82" wide, compared to 74" for the Alumacraft All Weld MV 1650 SC 2011. The US standard-width towing limit is 8’6" (102") in most states — anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.

Q: Are the Alumacraft All Weld MV 1650 SC 2011 and Alumacraft Navigator 165 CS 2003 from the same manufacturer?

Yes — both the Alumacraft All Weld MV 1650 SC 2011 and the Alumacraft Navigator 165 CS 2003 are built by Alumacraft. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.

Boat Comparison

Alumacraft All Weld MV 1650 SC 2011 vs Alumacraft Navigator 165 CS 2003

Alumacraft

Alumacraft All Weld MV 1650 SC 2011

2011

View full specs →

Alumacraft

Alumacraft Navigator 165 CS 2003

2003

View full specs →

Detailed Evaluation & Buyer Recommendation

Alumacraft All Weld MV 1650 SC 2011 vs Alumacraft Navigator 165 CS 2003 — Same Brand, Different Boat

The Alumacraft All Weld MV 1650 SC 2011 vs Alumacraft Navigator 165 CS 2003 comparison sits squarely in the category of decisions where specs alone won't tell the whole story — intended use, storage, and long-term ownership costs all factor in.

Both boats share a closely matched power ceiling — 60 hp for the Alumacraft All Weld MV 1650 SC 2011 and 75 hp for the Alumacraft Navigator 165 CS 2003. Real-world performance will come down more to which motor is actually bolted on, its load at the time, and whether it's a 4-stroke or 2-stroke setup.

Both boats are rated for 5 passengers — a good fit for a family of four or five plus guests. Comfort at capacity is another matter; the longer hull typically means more seat options and better weight distribution.

Bottom line: The Alumacraft All Weld MV 1650 SC 2011 and Alumacraft Navigator 165 CS 2003 are closely matched on the specs that matter most. Test-ride both on the water you actually use, check current dealer pricing, and factor in long-term service access before you sign.

General Boat Info

MakeAlumacraft

ModelAll Weld MV 1650 SC

ModelNavigator 165 CS

Model Year2011

Model Year2003

Measurements / Dimensions

Beam74 in

Beam82 in

Beam - Meters1.88

Beam - Meters2.08

Beam - Inches74

Beam - Inches82

Weight - Detail680 lbs

Weight - Detail880 lbs

Weight - kg308.44

Weight - kg399.16

Weight - lbs.68

Weight - lbs.88

Height - Detail22 in

Height - Detail36 in

Height - Meters0.56

Height - Meters0.91

Height - Inches22

Height - Inches36

Height [transom]21 in

Height [transom]82 in. 20 in

Length - Feet16

Length - Feetnot available

Length overall - Detail16 ft. 0 in

Length overall - Detail16 ft. 5 in

Length overall - Meters4.88

Length overall - Meters5

Length overall - Inches192

Length overall - Inches197

Draft [drive up] - Detailnot available

Draft [drive up] - Detailn/a

Body / Hull

Hull materialAluminum

Hull thickness0.102 in

Hull thicknessnot available

Hull typeModified Vee

Hull typenot available

Engine and Drivetrain

Fuel typeGas

Fuel typenot available

Drive typeOutboard

Drive typenot available

Engine max60 hp

Engine max75 hp

Fuel tank capacity - Detailnot available

Fuel tank capacity - Detail22 gal

Fuel tank capacity - Litersnot available

Fuel tank capacity - Liters83.28

Fuel tank capacity - Galnot available

Fuel tank capacity - Gal22

Operational Info

Maximum capacity1,100 lbs

Maximum capacitynot available

Maximum people5

Maximum people5 persons

Water capacitynot available

Water capacityn/a

Trailer Info

Trailer - Detailnot available

Trailer - Detailn/a

Alumacraft All Weld MV 1650 SC 2011 vs Alumacraft Navigator 165 CS 2003 — Common Questions

Which is easier to trailer — the Alumacraft All Weld MV 1650 SC 2011 or the Alumacraft Navigator 165 CS 2003?

For trailering, the Alumacraft All Weld MV 1650 SC 2011 has the edge at 68 lbs dry weight versus 88 lbs for the Alumacraft Navigator 165 CS 2003. Add a motor (typically 300–500 lbs for an outboard in this class), gear, and a partial fuel load and the difference grows. Lighter is friendlier on smaller tow vehicles and on fuel economy while hauling.

Which boat can handle a bigger outboard?

The Alumacraft Navigator 165 CS 2003 is rated to a maximum of 75 hp, giving it the larger power ceiling. The Alumacraft All Weld MV 1650 SC 2011 tops out at 60 hp. Keep in mind that maximum ratings are just that — matching the motor to the actual load and usage pattern usually matters more than chasing the ceiling.

How many people can each boat hold?

The Alumacraft All Weld MV 1650 SC 2011 is Coast Guard rated for 5 passengers, while the Alumacraft Navigator 165 CS 2003 is certified for 5. Note that legal capacity and comfortable capacity aren't always the same thing — on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.

Which boat is wider, and does it affect trailering?

The Alumacraft Navigator 165 CS 2003 measures 82" wide, compared to 74" for the Alumacraft All Weld MV 1650 SC 2011. The US standard-width towing limit is 8’6" (102") in most states — anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.

Are the Alumacraft All Weld MV 1650 SC 2011 and Alumacraft Navigator 165 CS 2003 from the same manufacturer?

Yes — both the Alumacraft All Weld MV 1650 SC 2011 and the Alumacraft Navigator 165 CS 2003 are built by Alumacraft. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.

← Alumacraft All Weld MV 1650 SC 2011 full specs ← Alumacraft Navigator 165 CS 2003 full specs