Alumacraft All Weld MV 1650 SC 2011 vs Alumacraft MV 1650 AW SC 2004 - Boat Spec Comparison

Q: Which is easier to trailer — the Alumacraft All Weld MV 1650 SC 2011 or the Alumacraft MV 1650 AW SC 2004?

For trailering, the Alumacraft All Weld MV 1650 SC 2011 has the edge at 68 lbs dry weight versus 575 lbs for the Alumacraft MV 1650 AW SC 2004. Add a motor (typically 300–500 lbs for an outboard in this class), gear, and a partial fuel load and the difference grows. Lighter is friendlier on smaller tow vehicles and on fuel economy while hauling.

Q: What is the maximum horsepower rating for these boats?

The Alumacraft All Weld MV 1650 SC 2011 has a documented max rating of 60 hp. Engine specifications for the Alumacraft MV 1650 AW SC 2004 were not available in our database — check the OEM spec sheet or manufacturer's website for confirmation.

Q: How many people can each boat hold?

The Alumacraft All Weld MV 1650 SC 2011 is Coast Guard rated for 5 passengers, while the Alumacraft MV 1650 AW SC 2004 is certified for 5. Note that legal capacity and comfortable capacity aren't always the same thing — on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.

Q: Do these boats require an oversize trailer permit to tow on US highways?

Both the Alumacraft All Weld MV 1650 SC 2011 and Alumacraft MV 1650 AW SC 2004 share an 74 in beam — meaning both sit right at the 8’6" threshold that most US states use for standard-width loads. In most states you can tow at that width without a special permit, but regulations vary. Always check the rules for your state and any states you'll be passing through before your first long haul.

Q: Are the Alumacraft All Weld MV 1650 SC 2011 and Alumacraft MV 1650 AW SC 2004 from the same manufacturer?

Yes — both the Alumacraft All Weld MV 1650 SC 2011 and the Alumacraft MV 1650 AW SC 2004 are built by Alumacraft. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.

Boat Comparison

Alumacraft All Weld MV 1650 SC 2011 vs Alumacraft MV 1650 AW SC 2004

Alumacraft

Alumacraft All Weld MV 1650 SC 2011

2011

View full specs →

Alumacraft

Alumacraft MV 1650 AW SC 2004

2004

View full specs →

Detailed Evaluation & Buyer Recommendation

Alumacraft All Weld MV 1650 SC 2011 vs Alumacraft MV 1650 AW SC 2004 — Same Brand, Different Boat

The Alumacraft All Weld MV 1650 SC 2011 vs Alumacraft MV 1650 AW SC 2004 comparison sits squarely in the category of decisions where specs alone won't tell the whole story — intended use, storage, and long-term ownership costs all factor in.

The Alumacraft All Weld MV 1650 SC 2011 carries a rated maximum of 60 hp. Engine data for the Alumacraft MV 1650 AW SC 2004 wasn't available in our records — check the manufacturer's spec sheet before sizing a motor.

Both boats are rated for 5 passengers — a good fit for a family of four or five plus guests. Comfort at capacity is another matter; the longer hull typically means more seat options and better weight distribution.

Bottom line: The Alumacraft All Weld MV 1650 SC 2011 and Alumacraft MV 1650 AW SC 2004 are closely matched on the specs that matter most. Test-ride both on the water you actually use, check current dealer pricing, and factor in long-term service access before you sign.

General Boat Info

MakeAlumacraft

ModelAll Weld MV 1650 SC

ModelMV 1650 AW SC

Model Year2011

Model Year2004

Measurements / Dimensions

Beam74 in

Beam - Meters1.88

Beam - Inches74

Weight - Detail680 lbs

Weight - Detail575 lbs

Weight - kg308.44

Weight - kg260.82

Weight - lbs.68

Weight - lbs.575

Height - Detail22 in

Height - Meters0.56

Height - Inches22

Height [transom]21 in

Length - Feet16

Length - Feetnot available

Length overall - Detail16 ft. 0 in

Length overall - Detail16 ft

Length overall - Meters4.88

Length overall - Inches192

Draft [drive up] - Detailnot available

Draft [drive up] - DetailN/A

Body / Hull

Hull materialAluminum

Hull thickness0.102 in

Hull thicknessnot available

Hull typeModified Vee

Hull typenot available

Engine and Drivetrain

Fuel typeGas

Fuel typenot available

Drive typeOutboard

Drive typenot available

Engine max60 hp

Engine maxnot available

Engine/s standardnot available

Engine/s standard60 hp

Fuel tank capacity - Detailnot available

Fuel tank capacity - DetailN/A

Operational Info

Maximum capacity1,100 lbs

Maximum capacitynot available

Maximum people5

Maximum people5 persons

Water capacitynot available

Water capacityN/A

Trailer Info

Trailer - Detailnot available

Trailer - DetailN/A

Alumacraft All Weld MV 1650 SC 2011 vs Alumacraft MV 1650 AW SC 2004 — Common Questions

Which is easier to trailer — the Alumacraft All Weld MV 1650 SC 2011 or the Alumacraft MV 1650 AW SC 2004?

For trailering, the Alumacraft All Weld MV 1650 SC 2011 has the edge at 68 lbs dry weight versus 575 lbs for the Alumacraft MV 1650 AW SC 2004. Add a motor (typically 300–500 lbs for an outboard in this class), gear, and a partial fuel load and the difference grows. Lighter is friendlier on smaller tow vehicles and on fuel economy while hauling.

What is the maximum horsepower rating for these boats?

The Alumacraft All Weld MV 1650 SC 2011 has a documented max rating of 60 hp. Engine specifications for the Alumacraft MV 1650 AW SC 2004 were not available in our database — check the OEM spec sheet or manufacturer's website for confirmation.

How many people can each boat hold?

The Alumacraft All Weld MV 1650 SC 2011 is Coast Guard rated for 5 passengers, while the Alumacraft MV 1650 AW SC 2004 is certified for 5. Note that legal capacity and comfortable capacity aren't always the same thing — on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.

Do these boats require an oversize trailer permit to tow on US highways?

Both the Alumacraft All Weld MV 1650 SC 2011 and Alumacraft MV 1650 AW SC 2004 share an 74 in beam — meaning both sit right at the 8’6" threshold that most US states use for standard-width loads. In most states you can tow at that width without a special permit, but regulations vary. Always check the rules for your state and any states you'll be passing through before your first long haul.

Are the Alumacraft All Weld MV 1650 SC 2011 and Alumacraft MV 1650 AW SC 2004 from the same manufacturer?

Yes — both the Alumacraft All Weld MV 1650 SC 2011 and the Alumacraft MV 1650 AW SC 2004 are built by Alumacraft. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.

← Alumacraft All Weld MV 1650 SC 2011 full specs ← Alumacraft MV 1650 AW SC 2004 full specs