Alumacraft All Weld MV 1650 SC 2011 vs Alumacraft MV 1448 2004 - Boat Spec Comparison

Q: Which is easier to trailer — the Alumacraft All Weld MV 1650 SC 2011 or the Alumacraft MV 1448 2004?

For trailering, the Alumacraft MV 1448 2004 has the edge at 24 lbs dry weight versus 68 lbs for the Alumacraft All Weld MV 1650 SC 2011. Add a motor (typically 300–500 lbs for an outboard in this class), gear, and a partial fuel load and the difference grows. Lighter is friendlier on smaller tow vehicles and on fuel economy while hauling.

Q: Which boat can handle a bigger outboard?

The Alumacraft All Weld MV 1650 SC 2011 is rated to a maximum of 60 hp, giving it the larger power ceiling. The Alumacraft MV 1448 2004 tops out at 25 hp. Keep in mind that maximum ratings are just that — matching the motor to the actual load and usage pattern usually matters more than chasing the ceiling.

Q: How many people can each boat hold?

The Alumacraft All Weld MV 1650 SC 2011 is Coast Guard rated for 5 passengers, while the Alumacraft MV 1448 2004 is certified for 5. Note that legal capacity and comfortable capacity aren't always the same thing — on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.

Q: Which boat is wider, and does it affect trailering?

The Alumacraft All Weld MV 1650 SC 2011 measures 74" wide, compared to 7" for the Alumacraft MV 1448 2004. The US standard-width towing limit is 8’6" (102") in most states — anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.

Q: Are the Alumacraft All Weld MV 1650 SC 2011 and Alumacraft MV 1448 2004 from the same manufacturer?

Yes — both the Alumacraft All Weld MV 1650 SC 2011 and the Alumacraft MV 1448 2004 are built by Alumacraft. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.

Boat Comparison

Alumacraft All Weld MV 1650 SC 2011 vs Alumacraft MV 1448 2004

Alumacraft

Alumacraft All Weld MV 1650 SC 2011

2011

View full specs →

Alumacraft

Alumacraft MV 1448 2004

2004

View full specs →

Detailed Evaluation & Buyer Recommendation

Alumacraft All Weld MV 1650 SC 2011 vs Alumacraft MV 1448 2004 — Same Brand, Different Boat

The Alumacraft All Weld MV 1650 SC 2011 vs Alumacraft MV 1448 2004 comparison sits squarely in the category of decisions where specs alone won't tell the whole story — intended use, storage, and long-term ownership costs all factor in.

The power gap is worth calling out. Rated to 60 hp, the Alumacraft All Weld MV 1650 SC 2011 has a 35-hp advantage over the Alumacraft MV 1448 2004's 25-hp ceiling — enough to notice on acceleration and at cruising speed, particularly with a full passenger load.

Both boats are rated for 5 passengers — a good fit for a family of four or five plus guests. Comfort at capacity is another matter; the longer hull typically means more seat options and better weight distribution.

Bottom line: Performance buyers should lean toward the Alumacraft All Weld MV 1650 SC 2011 and its 60-hp ceiling. If fuel economy and quieter running matter more than top-end speed, the Alumacraft MV 1448 2004 with its 25-hp rating is the more economical daily driver.

General Boat Info

MakeAlumacraft

ModelAll Weld MV 1650 SC

ModelMV 1448

Model Year2011

Model Year2004

Measurements / Dimensions

Beam74 in

Beam70 in

Beam - Meters1.88

Beam - Meters1.78

Beam - Inches74

Beam - Inches7

Weight - Detail680 lbs

Weight - Detail240 lbs

Weight - kg308.44

Weight - kg108.86

Weight - lbs.68

Weight - lbs.24

Height - Detail22 in

Height - Detail21 in

Height - Meters0.56

Height - Meters0.53

Height - Inches22

Height - Inches21

Height [transom]21 in

Height [transom]15 in

Length - Feet16

Length - Feetnot available

Length overall - Detail16 ft. 0 in

Length overall - Detail14 ft

Length overall - Meters4.88

Length overall - Meters4.27

Length overall - Inches192

Length overall - Inches168

Body / Hull

Hull materialAluminum

Hull thickness0.102 in

Hull thicknessnot available

Hull typeModified Vee

Hull typenot available

Engine and Drivetrain

Fuel typeGas

Fuel typenot available

Drive typeOutboard

Drive typenot available

Engine max60 hp

Engine max25 hp w/Tiller Steering

Operational Info

Maximum capacity1,100 lbs

Maximum capacitynot available

Maximum people5

Maximum people5 persons

Alumacraft All Weld MV 1650 SC 2011 vs Alumacraft MV 1448 2004 — Common Questions

Which is easier to trailer — the Alumacraft All Weld MV 1650 SC 2011 or the Alumacraft MV 1448 2004?

For trailering, the Alumacraft MV 1448 2004 has the edge at 24 lbs dry weight versus 68 lbs for the Alumacraft All Weld MV 1650 SC 2011. Add a motor (typically 300–500 lbs for an outboard in this class), gear, and a partial fuel load and the difference grows. Lighter is friendlier on smaller tow vehicles and on fuel economy while hauling.

Which boat can handle a bigger outboard?

The Alumacraft All Weld MV 1650 SC 2011 is rated to a maximum of 60 hp, giving it the larger power ceiling. The Alumacraft MV 1448 2004 tops out at 25 hp. Keep in mind that maximum ratings are just that — matching the motor to the actual load and usage pattern usually matters more than chasing the ceiling.

How many people can each boat hold?

The Alumacraft All Weld MV 1650 SC 2011 is Coast Guard rated for 5 passengers, while the Alumacraft MV 1448 2004 is certified for 5. Note that legal capacity and comfortable capacity aren't always the same thing — on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.

Which boat is wider, and does it affect trailering?

The Alumacraft All Weld MV 1650 SC 2011 measures 74" wide, compared to 7" for the Alumacraft MV 1448 2004. The US standard-width towing limit is 8’6" (102") in most states — anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.

Are the Alumacraft All Weld MV 1650 SC 2011 and Alumacraft MV 1448 2004 from the same manufacturer?

Yes — both the Alumacraft All Weld MV 1650 SC 2011 and the Alumacraft MV 1448 2004 are built by Alumacraft. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.

← Alumacraft All Weld MV 1650 SC 2011 full specs ← Alumacraft MV 1448 2004 full specs