The Alumacraft All Weld MV 1650 SC 2011 is a modified-V design and the Alumacraft Fisherman 160 CS 2013 is a deep-V design, so you're likely deciding between two noticeably different on-water experiences. Hull type shapes everything from ride quality and fuel burn to dock handling and resale trajectory.
On paper these two are close siblings in the size department - Alumacraft All Weld MV 1650 SC 2011 at 16,0 ft versus Alumacraft Fisherman 160 CS 2013 at 16,3 ft. At 680 lbs and 622 lbs respectively, both sit in a similar weight class - either should pair comfortably with most mid-size SUVs and half-ton trucks, though always confirm your specific tow rating with the motor added.
Both boats share a closely matched power ceiling - 60 hp for the Alumacraft All Weld MV 1650 SC 2011 and 40 hp for the Alumacraft Fisherman 160 CS 2013. Real-world performance will come down more to which motor is actually bolted on, its load at the time, and whether it's a 4-stroke or 2-stroke setup.
Both boats are rated for 5 passengers - a good fit for a family of four or five plus guests. Comfort at capacity is another matter; the longer hull typically means more seat options and better weight distribution.
At this size, power-to-weight ratio matters more than outright horsepower. The Alumacraft All Weld MV 1650 SC 2011 comes in at 11 lbs per hp versus 16 lbs per hp for the Alumacraft Fisherman 160 CS 2013. The lower the ratio the more explosive the acceleration - meaningful on a short RIB where bursts of speed, quick planing, and agility in surf or tight waterways define the experience.
Bottom line: Performance buyers should lean toward the Alumacraft All Weld MV 1650 SC 2011 and its 60-hp ceiling. If fuel economy and quieter running matter more than top-end speed, the Alumacraft Fisherman 160 CS 2013 with its 40-hp rating is the more economical daily driver.