Alumacraft All Weld MV 1650 CC 2012 vs Alumacraft MV Tex CS Deluxe 2001 - Boat Spec Comparison

Q: Which is easier to trailer — the Alumacraft All Weld MV 1650 CC 2012 or the Alumacraft MV Tex CS Deluxe 2001?

For trailering, the Alumacraft All Weld MV 1650 CC 2012 has the edge at 69 lbs dry weight versus 425 lbs for the Alumacraft MV Tex CS Deluxe 2001. Add a motor (typically 300–500 lbs for an outboard in this class), gear, and a partial fuel load and the difference grows. Lighter is friendlier on smaller tow vehicles and on fuel economy while hauling.

Q: What is the maximum horsepower rating for these boats?

The Alumacraft All Weld MV 1650 CC 2012 has a documented max rating of 60 hp. Engine specifications for the Alumacraft MV Tex CS Deluxe 2001 were not available in our database — check the OEM spec sheet or manufacturer's website for confirmation.

Q: How many people can each boat hold?

The Alumacraft All Weld MV 1650 CC 2012 is Coast Guard rated for 5 passengers, while the Alumacraft MV Tex CS Deluxe 2001 is certified for 5. Note that legal capacity and comfortable capacity aren't always the same thing — on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.

Q: Which boat is wider, and does it affect trailering?

The Alumacraft All Weld MV 1650 CC 2012 measures 74" wide, compared to 7" for the Alumacraft MV Tex CS Deluxe 2001. The US standard-width towing limit is 8’6" (102") in most states — anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.

Q: Are the Alumacraft All Weld MV 1650 CC 2012 and Alumacraft MV Tex CS Deluxe 2001 from the same manufacturer?

Yes — both the Alumacraft All Weld MV 1650 CC 2012 and the Alumacraft MV Tex CS Deluxe 2001 are built by Alumacraft. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.

Boat Comparison

Alumacraft All Weld MV 1650 CC 2012 vs Alumacraft MV Tex CS Deluxe 2001

Alumacraft

Alumacraft All Weld MV 1650 CC 2012

2012

View full specs →

$Alumacraft MV Tex CS Deluxe 2001 boat specs$

Alumacraft

Alumacraft MV Tex CS Deluxe 2001

2001

View full specs →

Detailed Evaluation & Buyer Recommendation

Alumacraft All Weld MV 1650 CC 2012 vs Alumacraft MV Tex CS Deluxe 2001 — Same Brand, Different Boat

The Alumacraft All Weld MV 1650 CC 2012 vs Alumacraft MV Tex CS Deluxe 2001 comparison sits squarely in the category of decisions where specs alone won't tell the whole story — intended use, storage, and long-term ownership costs all factor in.

The Alumacraft All Weld MV 1650 CC 2012 carries a rated maximum of 60 hp. Engine data for the Alumacraft MV Tex CS Deluxe 2001 wasn't available in our records — check the manufacturer's spec sheet before sizing a motor.

Both boats are rated for 5 passengers — a good fit for a family of four or five plus guests. Comfort at capacity is another matter; the longer hull typically means more seat options and better weight distribution.

Bottom line: The Alumacraft All Weld MV 1650 CC 2012 and Alumacraft MV Tex CS Deluxe 2001 are closely matched on the specs that matter most. Test-ride both on the water you actually use, check current dealer pricing, and factor in long-term service access before you sign.

General Boat Info

MakeAlumacraft

ModelAll Weld MV 1650 CC

ModelMV Tex CS Deluxe

Model Year2012

Model Year2001

Measurements / Dimensions

Beam74 in

Beam70"

Beam - Meters1.88

Beam - Meters1.78

Beam - Inches74

Beam - Inches7

Weight - Detail690 lbs

Weight - Detail425 lbs

Weight - kg312.98

Weight - kg192.78

Weight - lbs.69

Weight - lbs.425

Height - Detail22 in

Height - Detailnot available

Height - Meters0.56

Height - Metersnot available

Height - Inches22

Height - Inchesnot available

Height [transom]21 in

Height [transom]not available

Length - Feet16

Length - Feetnot available

Length overall - Detail16 ft

Length overall - Detail16' 0"

Length overall - Meters4.88

Length overall - Inches192

Body / Hull

Hull materialAluminum

Hull thickness0.102 in

Hull thicknessnot available

Hull typeTunnel

Hull typenot available

Engine and Drivetrain

Fuel typeGas

Fuel typenot available

Drive typeOutboard

Drive typenot available

Engine max60 hp

Engine maxnot available

Engine/s standardnot available

Engine/s standard15 - 55 hp

Operational Info

Maximum capacity1,100 lbs

Maximum capacitynot available

Maximum people5

Maximum people5 person

Alumacraft All Weld MV 1650 CC 2012 vs Alumacraft MV Tex CS Deluxe 2001 — Common Questions

Which is easier to trailer — the Alumacraft All Weld MV 1650 CC 2012 or the Alumacraft MV Tex CS Deluxe 2001?

For trailering, the Alumacraft All Weld MV 1650 CC 2012 has the edge at 69 lbs dry weight versus 425 lbs for the Alumacraft MV Tex CS Deluxe 2001. Add a motor (typically 300–500 lbs for an outboard in this class), gear, and a partial fuel load and the difference grows. Lighter is friendlier on smaller tow vehicles and on fuel economy while hauling.

What is the maximum horsepower rating for these boats?

The Alumacraft All Weld MV 1650 CC 2012 has a documented max rating of 60 hp. Engine specifications for the Alumacraft MV Tex CS Deluxe 2001 were not available in our database — check the OEM spec sheet or manufacturer's website for confirmation.

How many people can each boat hold?

The Alumacraft All Weld MV 1650 CC 2012 is Coast Guard rated for 5 passengers, while the Alumacraft MV Tex CS Deluxe 2001 is certified for 5. Note that legal capacity and comfortable capacity aren't always the same thing — on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.

Which boat is wider, and does it affect trailering?

The Alumacraft All Weld MV 1650 CC 2012 measures 74" wide, compared to 7" for the Alumacraft MV Tex CS Deluxe 2001. The US standard-width towing limit is 8’6" (102") in most states — anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.

Are the Alumacraft All Weld MV 1650 CC 2012 and Alumacraft MV Tex CS Deluxe 2001 from the same manufacturer?

Yes — both the Alumacraft All Weld MV 1650 CC 2012 and the Alumacraft MV Tex CS Deluxe 2001 are built by Alumacraft. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.

← Alumacraft All Weld MV 1650 CC 2012 full specs ← Alumacraft MV Tex CS Deluxe 2001 full specs