Alumacraft All Weld MV 1650 CC 2012 vs Alumacraft Fisherman 160 Tiller 2009 - Boat Spec Comparison

Q: Which is the larger boat — the Alumacraft All Weld MV 1650 CC 2012 or the Alumacraft Fisherman 160 Tiller 2009?

The Alumacraft Fisherman 160 Tiller 2009 is the longer of the two at 16,0 feet overall. The Alumacraft All Weld MV 1650 CC 2012 comes in at 16,0 feet, making it roughly 0,0 ft shorter — a meaningful difference in deck room and overall on-water presence.

Q: Which is easier to trailer — the Alumacraft All Weld MV 1650 CC 2012 or the Alumacraft Fisherman 160 Tiller 2009?

For trailering, the Alumacraft Fisherman 160 Tiller 2009 has the edge at 6 lbs dry weight versus 69 lbs for the Alumacraft All Weld MV 1650 CC 2012. Add a motor (typically 300–500 lbs for an outboard in this class), gear, and a partial fuel load and the difference grows. Lighter is friendlier on smaller tow vehicles and on fuel economy while hauling.

Q: What is the maximum horsepower rating for these boats?

The Alumacraft All Weld MV 1650 CC 2012 has a documented max rating of 60 hp. Engine specifications for the Alumacraft Fisherman 160 Tiller 2009 were not available in our database — check the OEM spec sheet or manufacturer's website for confirmation.

Q: How many people can each boat hold?

The Alumacraft All Weld MV 1650 CC 2012 is Coast Guard rated for 5 passengers, while the Alumacraft Fisherman 160 Tiller 2009 is certified for 5. Note that legal capacity and comfortable capacity aren't always the same thing — on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.

Q: Which boat is wider, and does it affect trailering?

The Alumacraft All Weld MV 1650 CC 2012 measures 74" wide, compared to 73" for the Alumacraft Fisherman 160 Tiller 2009. The US standard-width towing limit is 8’6" (102") in most states — anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.

Q: Are the Alumacraft All Weld MV 1650 CC 2012 and Alumacraft Fisherman 160 Tiller 2009 from the same manufacturer?

Yes — both the Alumacraft All Weld MV 1650 CC 2012 and the Alumacraft Fisherman 160 Tiller 2009 are built by Alumacraft. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.

Boat Comparison

Alumacraft All Weld MV 1650 CC 2012 vs Alumacraft Fisherman 160 Tiller 2009

Alumacraft

Alumacraft All Weld MV 1650 CC 2012

2012

View full specs →

Alumacraft

Alumacraft Fisherman 160 Tiller 2009

2009

View full specs →

Detailed Evaluation & Buyer Recommendation

Alumacraft All Weld MV 1650 CC 2012 vs Alumacraft Fisherman 160 Tiller 2009 — Same Brand, Different Boat

Matching a tunnel Alumacraft All Weld MV 1650 CC 2012 against a other Alumacraft Fisherman 160 Tiller 2009 means you're likely deciding between two genuinely different on-water experiences. Hull type shapes everything from ride quality and fuel burn to dock handling and resale trajectory.

On paper these two are close siblings in the size department — Alumacraft All Weld MV 1650 CC 2012 at 16,0 ft versus Alumacraft Fisherman 160 Tiller 2009 at 16,0 ft. At 69 lbs and 6 lbs respectively, both sit in a similar weight class — either should pair comfortably with most mid-size SUVs and half-ton trucks, though always confirm your specific tow rating with the motor added.

The Alumacraft All Weld MV 1650 CC 2012 carries a rated maximum of 60 hp. Engine data for the Alumacraft Fisherman 160 Tiller 2009 wasn't available in our records — check the manufacturer's spec sheet before sizing a motor.

Both boats are rated for 5 passengers — a good fit for a family of four or five plus guests. Comfort at capacity is another matter; the longer hull typically means more seat options and better weight distribution.

Bottom line: The Alumacraft All Weld MV 1650 CC 2012 and Alumacraft Fisherman 160 Tiller 2009 are closely matched on the specs that matter most. Test-ride both on the water you actually use, check current dealer pricing, and factor in long-term service access before you sign.

General Boat Info

MakeAlumacraft

ModelAll Weld MV 1650 CC

ModelFisherman 160 Tiller

Model Year2012

Model Year2009

Measurements / Dimensions

Beam74 in

Beam73 in. (1.85 m)

Beam - Meters1.88

Beam - Meters1.85

Beam - Inches74

Beam - Inches73

Weight - Detail690 lbs

Weight - Detail600 lbs. (272 kg)

Weight - kg312.98

Weight - kg272.16

Weight - lbs.69

Weight - lbs.6

Height - Detail22 in

Height - Detailnot available

Height - Meters0.56

Height - Metersnot available

Height - Inches22

Height - Inchesnot available

Height [transom]21 in

Height [transom]20 in. (0.51 m)

Length - Feet16

Length overall - Detail16 ft

Length overall - Detailnot available

Length overall - Meters4.88

Length overall - Metersnot available

Length overall - Inches192

Length overall - Inchesnot available

Depth - Detailnot available

Depth - DetailMaximum: 32 in (0.82 m) To Floor: 20 in. (0.51 m)

Depth - Centimetersnot available

Depth - Centimeters50.8

Depth - Inchesnot available

Depth - Inches2

Width [transom] - Detailnot available

Width [transom] - Detail67 in (1.7 m)

Length - Metersnot available

Length - Meters4.95

Length - Inchesnot available

Length - Inches3

Body / Hull

Hull materialAluminum

Hull thickness0.102 in

Hull thicknessFull Vee Hull: Bottom-0.080 in. (2 mm) Sides-0.065 in. (1.7 mm)

Hull typeTunnel

Hull typeOther

Engine and Drivetrain

Fuel typeGas

Drive typeOutboard

Engine max60 hp

Engine maxnot available

Engine/s standardnot available

Engine/s standard25 hp (18 kW)

Operational Info

Maximum capacity1,100 lbs

Maximum capacity1,118 lbs. (507 kg)

Maximum people5

Alumacraft All Weld MV 1650 CC 2012 vs Alumacraft Fisherman 160 Tiller 2009 — Common Questions

Which is the larger boat — the Alumacraft All Weld MV 1650 CC 2012 or the Alumacraft Fisherman 160 Tiller 2009?

The Alumacraft Fisherman 160 Tiller 2009 is the longer of the two at 16,0 feet overall. The Alumacraft All Weld MV 1650 CC 2012 comes in at 16,0 feet, making it roughly 0,0 ft shorter — a meaningful difference in deck room and overall on-water presence.

Which is easier to trailer — the Alumacraft All Weld MV 1650 CC 2012 or the Alumacraft Fisherman 160 Tiller 2009?

For trailering, the Alumacraft Fisherman 160 Tiller 2009 has the edge at 6 lbs dry weight versus 69 lbs for the Alumacraft All Weld MV 1650 CC 2012. Add a motor (typically 300–500 lbs for an outboard in this class), gear, and a partial fuel load and the difference grows. Lighter is friendlier on smaller tow vehicles and on fuel economy while hauling.

What is the maximum horsepower rating for these boats?

The Alumacraft All Weld MV 1650 CC 2012 has a documented max rating of 60 hp. Engine specifications for the Alumacraft Fisherman 160 Tiller 2009 were not available in our database — check the OEM spec sheet or manufacturer's website for confirmation.

How many people can each boat hold?

The Alumacraft All Weld MV 1650 CC 2012 is Coast Guard rated for 5 passengers, while the Alumacraft Fisherman 160 Tiller 2009 is certified for 5. Note that legal capacity and comfortable capacity aren't always the same thing — on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.

Which boat is wider, and does it affect trailering?

The Alumacraft All Weld MV 1650 CC 2012 measures 74" wide, compared to 73" for the Alumacraft Fisherman 160 Tiller 2009. The US standard-width towing limit is 8’6" (102") in most states — anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.

Are the Alumacraft All Weld MV 1650 CC 2012 and Alumacraft Fisherman 160 Tiller 2009 from the same manufacturer?

Yes — both the Alumacraft All Weld MV 1650 CC 2012 and the Alumacraft Fisherman 160 Tiller 2009 are built by Alumacraft. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.

← Alumacraft All Weld MV 1650 CC 2012 full specs ← Alumacraft Fisherman 160 Tiller 2009 full specs