The spec sheets list the Alumacraft All Weld MV 1650 CC 2011 as tunnel and the Alumacraft V14 2008 as other, so check how each hull rides in the conditions you use before you decide.
On paper these two are close siblings in the size department - Alumacraft All Weld MV 1650 CC 2011 at 16,0 ft versus Alumacraft V14 2008 at 14,0 ft. Weight tells a clearer story for trailering families: the Alumacraft All Weld MV 1650 CC 2011 tips the scales at 690 lbs - 421 lbs more than the Alumacraft V14 2008 at 269 lbs. That difference is meaningful if you're working within a half-ton or three-quarter-ton truck's tow rating, especially once you factor in a motor, gear, and fuel.
The power gap is worth calling out. Rated to 60 hp, the Alumacraft All Weld MV 1650 CC 2011 has a 40-hp advantage over the Alumacraft V14 2008's 20-hp ceiling - enough to notice on acceleration and at cruising speed, particularly with a full passenger load.
Both boats are rated for 5 passengers - a good fit for a family of four or five plus guests. Comfort at capacity is another matter; the longer hull typically means more seat options and better weight distribution.
At this size, power-to-weight ratio matters more than outright horsepower. The Alumacraft All Weld MV 1650 CC 2011 comes in at 12 lbs per hp versus 13 lbs per hp for the Alumacraft V14 2008. The lower the ratio the more explosive the acceleration - meaningful on a short RIB where bursts of speed, quick planing, and agility in surf or tight waterways define the experience.
Bottom line: Performance buyers should lean toward the Alumacraft All Weld MV 1650 CC 2011 and its 60-hp ceiling. If fuel economy and quieter running matter more than top-end speed, the Alumacraft V14 2008 with its 20-hp rating is the more economical daily driver.