Alumacraft All Weld MV 1650 CC 2011 boat specs
Alumacraft
Alumacraft All Weld MV 1650 CC 2011
2011
View full specs →
VS
Alumacraft Magnum 175  2005 boat specs
Alumacraft
Alumacraft Magnum 175 2005
2005
View full specs →

Alumacraft All Weld MV 1650 CC 2011 vs Alumacraft Magnum 175 2005: Same Brand, Different Boat

The Alumacraft All Weld MV 1650 CC 2011 vs Alumacraft Magnum 175 2005 comparison sits squarely in the category of decisions where specs alone won't tell the whole story: intended use, storage, and long-term ownership costs all factor in.

On paper these two are close siblings in the size department - Alumacraft All Weld MV 1650 CC 2011 at 16,0 ft versus Alumacraft Magnum 175 2005 at 17,0 ft. Weight tells a clearer story for trailering families: the Alumacraft Magnum 175 2005 tips the scales at 1 135 lbs - 445 lbs less than the Alumacraft All Weld MV 1650 CC 2011 at 690 lbs. That difference is meaningful if you're working within a half-ton or three-quarter-ton truck's tow rating, especially once you factor in a motor, gear, and fuel.

Both boats share a closely matched power ceiling - 60 hp for the Alumacraft All Weld MV 1650 CC 2011 and 80 hp for the Alumacraft Magnum 175 2005. Real-world performance will come down more to which motor is actually bolted on, its load at the time, and whether it's a 4-stroke or 2-stroke setup.

Both boats are rated for 5 passengers - a good fit for a family of four or five plus guests. Comfort at capacity is another matter; the longer hull typically means more seat options and better weight distribution.

At this size, power-to-weight ratio matters more than outright horsepower. The Alumacraft All Weld MV 1650 CC 2011 comes in at 12 lbs per hp versus 14 lbs per hp for the Alumacraft Magnum 175 2005. The lower the ratio the more explosive the acceleration - meaningful on a short RIB where bursts of speed, quick planing, and agility in surf or tight waterways define the experience.

Bottom line: Performance buyers should lean toward the Alumacraft Magnum 175 2005 and its 80-hp ceiling. If fuel economy and quieter running matter more than top-end speed, the Alumacraft All Weld MV 1650 CC 2011 with its 60-hp rating is the more economical daily driver.
General Boat Info
MakeAlumacraft
MakeAlumacraft
ModelAll Weld MV 1650 CC
ModelMagnum 175
Model Year2011
Model Year2005
Measurements / Dimensions
Beam74 in.
Beam88 in. (2.24 m)
Beam - Meters1.88
Beam - Meters2.24
Beam - Inches74
Beam - Inches88
Weight - Detail690 lbs.
Weight - Detail1135 lbs. (515 kg)
Weight - kg312.98
Weight - kg514.83
Weight - lbs.690
Weight - lbs.1135
Height - Detail22 in.
Height - Detailnot available
Height - Meters0.56
Height - Metersnot available
Height - Inches22
Height - Inchesnot available
Height [transom]21 in.
Height [transom]20 in. (.51 m)
Length - Feet16
Length - Feet17
Length overall - Detail16 ft. 0 in.
Length overall - Detail17 ft. 11 in. (5.46 m)
Length overall - Meters4.88
Length overall - Meters5.46
Length overall - Inches192
Length overall - Inches215
Depth - Detailnot available
Depth - Detail41 in. (1.04 m) Maximum to floor: 22 in. (.56 m)
Depth - Centimetersnot available
Depth - Centimeters104.14
Depth - Inchesnot available
Depth - Inches41
Width [transom] - Detailnot available
Width [transom] - Detail88 in. (2.24 m)
Length - Metersnot available
Length - Meters5.46
Length - Inchesnot available
Length - Inches11
Body / Hull
Hull materialAluminum
Hull materialnot available
Hull thickness0.102 in.
Hull thicknessBottom: .080 in. (2.0 mm) Sides: .080 in. (2.0mm)
Hull typeTunnel
Hull typenot available
Engine and Drivetrain
Fuel typeGas
Fuel typenot available
Drive typeOutboard
Drive typenot available
Engine max60 hp
Engine max80 hp (60 kw)
Fuel tank capacity - Detailnot available
Fuel tank capacity - Detail34 gal. (129 l)
Fuel tank capacity - Litersnot available
Fuel tank capacity - Liters128.7
Fuel tank capacity - Galnot available
Fuel tank capacity - Gal34
Operational Info
Maximum capacity1,100 lbs.
Maximum capacitynot available
Maximum people5
Maximum people5

Alumacraft All Weld MV 1650 CC 2011 vs Alumacraft Magnum 175 2005 - Common Questions

Which is the larger boat - the Alumacraft All Weld MV 1650 CC 2011 or the Alumacraft Magnum 175 2005?
The Alumacraft Magnum 175 2005 is the longer of the two at 17,0 feet overall. The Alumacraft All Weld MV 1650 CC 2011 comes in at 16,0 feet, making it roughly 1,0 ft shorter - a meaningful difference in deck room and overall on-water presence.
Which is easier to trailer - the Alumacraft All Weld MV 1650 CC 2011 or the Alumacraft Magnum 175 2005?
For trailering, the Alumacraft All Weld MV 1650 CC 2011 has the edge at 690 lbs dry weight versus 1 135 lbs for the Alumacraft Magnum 175 2005. Add a motor (typically 300–500 lbs for an outboard in this class), gear, and a partial fuel load and the difference grows. Lighter is friendlier on smaller tow vehicles and on fuel economy while hauling.
Which boat can handle a bigger outboard?
The Alumacraft Magnum 175 2005 is rated to a maximum of 80 hp, giving it the larger power ceiling. The Alumacraft All Weld MV 1650 CC 2011 tops out at 60 hp. Keep in mind that maximum ratings are just that - matching the motor to the actual load and usage pattern usually matters more than chasing the ceiling.
How many people can each boat hold?
The Alumacraft All Weld MV 1650 CC 2011 is Coast Guard rated for 5 passengers, while the Alumacraft Magnum 175 2005 is certified for 5. Note that legal capacity and comfortable capacity aren't always the same thing - on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.
Which boat has the better power-to-weight ratio?
The Alumacraft All Weld MV 1650 CC 2011 has a better power-to-weight ratio at 12 lbs per hp compared to 14 lbs per hp for the Alumacraft Magnum 175 2005. A lower number means quicker acceleration and faster time to plane - the number that actually matters most on short, sporty boats like these.
Which boat is wider, and does it affect trailering?
The Alumacraft Magnum 175 2005 measures 88" wide, compared to 74" for the Alumacraft All Weld MV 1650 CC 2011. The US standard-width towing limit is 8’6" (102") in most states - anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.
Are the Alumacraft All Weld MV 1650 CC 2011 and Alumacraft Magnum 175 2005 from the same manufacturer?
Yes - both the Alumacraft All Weld MV 1650 CC 2011 and the Alumacraft Magnum 175 2005 are built by Alumacraft. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.