Alumacraft All Weld MV 1546 DD 2011 boat specs
Alumacraft
Alumacraft All Weld MV 1546 DD 2011
2011
View full specs →
VS
Alumacraft V14 2005 boat specs
Alumacraft
Alumacraft V14 2005
2005
View full specs →

Alumacraft All Weld MV 1546 DD 2011 vs Alumacraft V14 2005: Same Brand, Different Boat

The Alumacraft All Weld MV 1546 DD 2011 vs Alumacraft V14 2005 comparison sits squarely in the category of decisions where specs alone won't tell the whole story: intended use, storage, and long-term ownership costs all factor in.

On paper these two are close siblings in the size department - Alumacraft All Weld MV 1546 DD 2011 at 16,0 ft versus Alumacraft V14 2005 at 14,0 ft. At 340 lbs and 245 lbs respectively, both sit in a similar weight class - either should pair comfortably with most mid-size SUVs and half-ton trucks, though always confirm your specific tow rating with the motor added.

Both boats share a closely matched power ceiling - 25 hp for the Alumacraft All Weld MV 1546 DD 2011 and 25 hp for the Alumacraft V14 2005. Real-world performance will come down more to which motor is actually bolted on, its load at the time, and whether it's a 4-stroke or 2-stroke setup.

For family outings this is probably the sharpest distinction between the two. The Alumacraft V14 2005 is rated for 5 passengers, while the Alumacraft All Weld MV 1546 DD 2011 caps at 3. If you're regularly pulling extended family or a group of friends onto the water, the extra seats on the Alumacraft V14 2005 could be the deciding factor.

At this size, power-to-weight ratio matters more than outright horsepower. The Alumacraft V14 2005 comes in at 10 lbs per hp versus 14 lbs per hp for the Alumacraft All Weld MV 1546 DD 2011. The lower the ratio the more explosive the acceleration - meaningful on a short RIB where bursts of speed, quick planing, and agility in surf or tight waterways define the experience.

Bottom line: Choose the Alumacraft V14 2005 if your priority is putting more people on the water - it handles 5 passengers and at 14,0 ft it has the deck room to back that rating up comfortably. The Alumacraft All Weld MV 1546 DD 2011 is the smarter pick if you want a lighter, easier-to-trailer boat rated for 3 that costs less to run day-to-day.
General Boat Info
MakeAlumacraft
MakeAlumacraft
ModelAll Weld MV 1546 DD
ModelV14
Model Year2011
Model Year2005
Measurements / Dimensions
Beam65 in.
Beam68 in. (1.73 m)
Beam - Meters1.65
Beam - Meters1.73
Beam - Inches65
Beam - Inches68
Weight - Detail340 lbs.
Weight - Detail230/245 lbs. per transom height (104/111 kg)
Weight - kg154.22
Weight - kg111.13
Weight - lbs.340
Weight - lbs.245
Height - Detail20 in.
Height - Detail30 in. (0.76 m)
Height - Meters0.51
Height - Meters0.76
Height - Inches20
Height - Inches30
Height [transom]15 in.
Height [transom]15/20 in. (0.38/0.51 m)
Length - Feet16
Length - Feet14
Length overall - Detail16 ft. 0 in.
Length overall - Detail14 ft. 3 in. (4.34 m)
Length overall - Meters4.88
Length overall - Meters4.34
Length overall - Inches192
Length overall - Inches171
Width [transom] - Detailnot available
Width [transom] - Detail63 in. (1.60 m)
Length - Metersnot available
Length - Meters4.34
Length - Inchesnot available
Length - Inches3
Body / Hull
Hull materialAluminum
Hull materialnot available
Hull thickness0.080 in.
Hull thickness0.065 in. (1.7 mm)
Hull typeModified Vee
Hull typenot available
Engine and Drivetrain
Fuel typeGas
Fuel typenot available
Drive typeOutboard
Drive typenot available
Engine max25 hp
Engine max25 hp (19 kw)
Operational Info
Maximum capacity719 lbs.
Maximum capacitynot available
Maximum people3
Maximum people5

Alumacraft All Weld MV 1546 DD 2011 vs Alumacraft V14 2005 - Common Questions

Which is the larger boat - the Alumacraft All Weld MV 1546 DD 2011 or the Alumacraft V14 2005?
The Alumacraft All Weld MV 1546 DD 2011 is the longer of the two at 16,0 feet overall. The Alumacraft V14 2005 comes in at 14,0 feet, making it roughly 2,0 ft shorter - a meaningful difference in deck room and overall on-water presence.
Which is easier to trailer - the Alumacraft All Weld MV 1546 DD 2011 or the Alumacraft V14 2005?
For trailering, the Alumacraft V14 2005 has the edge at 245 lbs dry weight versus 340 lbs for the Alumacraft All Weld MV 1546 DD 2011. Add a motor (typically 300–500 lbs for an outboard in this class), gear, and a partial fuel load and the difference grows. Lighter is friendlier on smaller tow vehicles and on fuel economy while hauling.
How many people can each boat hold?
The Alumacraft All Weld MV 1546 DD 2011 is Coast Guard rated for 3 passengers, while the Alumacraft V14 2005 is certified for 5. Note that legal capacity and comfortable capacity aren't always the same thing - on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.
Which boat has the better power-to-weight ratio?
The Alumacraft V14 2005 has a better power-to-weight ratio at 10 lbs per hp compared to 14 lbs per hp for the Alumacraft All Weld MV 1546 DD 2011. A lower number means quicker acceleration and faster time to plane - the number that actually matters most on short, sporty boats like these.
Which boat is wider, and does it affect trailering?
The Alumacraft V14 2005 measures 68" wide, compared to 65" for the Alumacraft All Weld MV 1546 DD 2011. The US standard-width towing limit is 8’6" (102") in most states - anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.
Are the Alumacraft All Weld MV 1546 DD 2011 and Alumacraft V14 2005 from the same manufacturer?
Yes - both the Alumacraft All Weld MV 1546 DD 2011 and the Alumacraft V14 2005 are built by Alumacraft. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.