Alumacraft All Weld MV 1546 DD Tunnel 2012 boat specs
Alumacraft
Alumacraft All Weld MV 1546 DD Tunnel 2012
2012
View full specs →
VS
Alumacraft Trophy 175 2006 boat specs
Alumacraft
Alumacraft Trophy 175 2006
2006
View full specs →

Alumacraft All Weld MV 1546 DD Tunnel 2012 vs Alumacraft Trophy 175 2006: Same Brand, Different Boat

The Alumacraft All Weld MV 1546 DD Tunnel 2012 is a tunnel hull design and the Alumacraft Trophy 175 2006 is a modified-V design, so you're likely deciding between two noticeably different on-water experiences. Hull type shapes everything from ride quality and fuel burn to dock handling and resale trajectory.

On paper these two are close siblings in the size department - Alumacraft All Weld MV 1546 DD Tunnel 2012 at 15,0 ft versus Alumacraft Trophy 175 2006 at 17,0 ft. Weight tells a clearer story for trailering families: the Alumacraft Trophy 175 2006 tips the scales at 1 215 lbs - 875 lbs less than the Alumacraft All Weld MV 1546 DD Tunnel 2012 at 340 lbs. That difference is meaningful if you're working within a half-ton or three-quarter-ton truck's tow rating, especially once you factor in a motor, gear, and fuel.

The power gap is worth calling out. Rated to 150 hp, the Alumacraft Trophy 175 2006 has a 125-hp advantage over the Alumacraft All Weld MV 1546 DD Tunnel 2012's 25-hp ceiling - enough to notice on acceleration and at cruising speed, particularly with a full passenger load.

For family outings this is probably the sharpest distinction between the two. The Alumacraft Trophy 175 2006 is rated for 6 passengers, while the Alumacraft All Weld MV 1546 DD Tunnel 2012 caps at 3. If you're regularly pulling extended family or a group of friends onto the water, the extra seats on the Alumacraft Trophy 175 2006 could be the deciding factor.

At this size, power-to-weight ratio matters more than outright horsepower. The Alumacraft Trophy 175 2006 comes in at 8 lbs per hp versus 14 lbs per hp for the Alumacraft All Weld MV 1546 DD Tunnel 2012. The lower the ratio the more explosive the acceleration - meaningful on a short RIB where bursts of speed, quick planing, and agility in surf or tight waterways define the experience.

Bottom line: Choose the Alumacraft Trophy 175 2006 if your priority is putting more people on the water - it handles 6 passengers and at 17,0 ft it has the deck room to back that rating up comfortably. The Alumacraft All Weld MV 1546 DD Tunnel 2012 is the smarter pick if you want a lighter, easier-to-trailer boat rated for 3 that costs less to run day-to-day.
General Boat Info
MakeAlumacraft
MakeAlumacraft
ModelAll Weld MV 1546 DD Tunnel
ModelTrophy 175
Model Year2012
Model Year2006
Measurements / Dimensions
Beam65 in.
Beam88 in. (2.24 m)
Beam - Meters1.65
Beam - Meters2.24
Beam - Inches65
Beam - Inches88
Weight - Detail340 lbs.
Weight - Detail1,215 lbs. (547 kg)
Weight - kg154.22
Weight - kg551.11
Weight - lbs.340
Weight - lbs.1215
Height - Detail20 in.
Height - Detailnot available
Height - Meters0.51
Height - Metersnot available
Height - Inches20
Height - Inchesnot available
Height [transom]15 in.
Height [transom]25 in. (0.51 m)
Length - Feet15
Length - Feet17
Length overall - Detail15 ft.
Length overall - Detail17 ft. 6 in. (5.33 m)
Length overall - Meters4.57
Length overall - Meters5.33
Length overall - Inches180
Length overall - Inches210
Depth - Detailnot available
Depth - DetailMaximum: 41 in. (1.04 m) To Floor: 25.5 in. (0.65 m)
Depth - Centimetersnot available
Depth - Centimeters104.14
Depth - Inchesnot available
Depth - Inches41
Width [transom] - Detailnot available
Width [transom] - Detail84 in. (2.1 m)
Length - Metersnot available
Length - Meters5.33
Length - Inchesnot available
Length - Inches6
Body / Hull
Hull materialAluminum
Hull materialAluminum
Hull thickness0.080 in.
Hull thicknessBottom: .100 in. (2.5 mm) Sides: .080 in. (2.0 mm) 2XB Bow?2nd Plate: .100 in. 2XB Bottom?2nd Plate: .080 in.
Hull typeTunnel
Hull typeModified Vee
Engine and Drivetrain
Fuel typeGas
Fuel typeGas
Drive typeOutboard
Drive typeOutboard
Engine max25 hp
Engine max150 hp (111 kw)
Fuel tank capacity - Detailnot available
Fuel tank capacity - Detail23 gal. (97 l)
Fuel tank capacity - Litersnot available
Fuel tank capacity - Liters87.06
Fuel tank capacity - Galnot available
Fuel tank capacity - Gal23
Operational Info
Maximum capacity719 lbs.
Maximum capacity1,500 lbs. (680 kg)
Maximum people3
Maximum people6

Alumacraft All Weld MV 1546 DD Tunnel 2012 vs Alumacraft Trophy 175 2006 - Common Questions

Which is the larger boat - the Alumacraft All Weld MV 1546 DD Tunnel 2012 or the Alumacraft Trophy 175 2006?
The Alumacraft Trophy 175 2006 is the longer of the two at 17,0 feet overall. The Alumacraft All Weld MV 1546 DD Tunnel 2012 comes in at 15,0 feet, making it roughly 2,0 ft shorter - a meaningful difference in deck room and overall on-water presence.
Which is easier to trailer - the Alumacraft All Weld MV 1546 DD Tunnel 2012 or the Alumacraft Trophy 175 2006?
For trailering, the Alumacraft All Weld MV 1546 DD Tunnel 2012 has the edge at 340 lbs dry weight versus 1 215 lbs for the Alumacraft Trophy 175 2006. Add a motor (typically 300–500 lbs for an outboard in this class), gear, and a partial fuel load and the difference grows. Lighter is friendlier on smaller tow vehicles and on fuel economy while hauling.
Which boat can handle a bigger outboard?
The Alumacraft Trophy 175 2006 is rated to a maximum of 150 hp, giving it the larger power ceiling. The Alumacraft All Weld MV 1546 DD Tunnel 2012 tops out at 25 hp. Keep in mind that maximum ratings are just that - matching the motor to the actual load and usage pattern usually matters more than chasing the ceiling.
How many people can each boat hold?
The Alumacraft All Weld MV 1546 DD Tunnel 2012 is Coast Guard rated for 3 passengers, while the Alumacraft Trophy 175 2006 is certified for 6. Note that legal capacity and comfortable capacity aren't always the same thing - on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.
Which boat has the better power-to-weight ratio?
The Alumacraft Trophy 175 2006 has a better power-to-weight ratio at 8 lbs per hp compared to 14 lbs per hp for the Alumacraft All Weld MV 1546 DD Tunnel 2012. A lower number means quicker acceleration and faster time to plane - the number that actually matters most on short, sporty boats like these.
Which boat is wider, and does it affect trailering?
The Alumacraft Trophy 175 2006 measures 88" wide, compared to 65" for the Alumacraft All Weld MV 1546 DD Tunnel 2012. The US standard-width towing limit is 8’6" (102") in most states - anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.
Are the Alumacraft All Weld MV 1546 DD Tunnel 2012 and Alumacraft Trophy 175 2006 from the same manufacturer?
Yes - both the Alumacraft All Weld MV 1546 DD Tunnel 2012 and the Alumacraft Trophy 175 2006 are built by Alumacraft. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.