Alumacraft All Weld MV 1546 DD Tunnel 2011 boat specs
Alumacraft
Alumacraft All Weld MV 1546 DD Tunnel 2011
2011
View full specs →
VS
Alumacraft Riveted Jon 1648 NCS 2011 boat specs
Alumacraft
Alumacraft Riveted Jon 1648 NCS 2011
2011
View full specs →

Alumacraft All Weld MV 1546 DD Tunnel 2011 vs Alumacraft Riveted Jon 1648 NCS 2011: Same Brand, Different Boat

The Alumacraft All Weld MV 1546 DD Tunnel 2011 is a modified-V design and the Alumacraft Riveted Jon 1648 NCS 2011 is a flat-bottom design, so you're likely deciding between two noticeably different on-water experiences. Hull type shapes everything from ride quality and fuel burn to dock handling and resale trajectory.

On paper these two are close siblings in the size department - Alumacraft All Weld MV 1546 DD Tunnel 2011 at 15,0 ft versus Alumacraft Riveted Jon 1648 NCS 2011 at 16,0 ft. At 340 lbs and 260 lbs respectively, both sit in a similar weight class - either should pair comfortably with most mid-size SUVs and half-ton trucks, though always confirm your specific tow rating with the motor added.

Both boats share a closely matched power ceiling - 25 hp for the Alumacraft All Weld MV 1546 DD Tunnel 2011 and 30 hp for the Alumacraft Riveted Jon 1648 NCS 2011. Real-world performance will come down more to which motor is actually bolted on, its load at the time, and whether it's a 4-stroke or 2-stroke setup.

For family outings this is probably the sharpest distinction between the two. The Alumacraft Riveted Jon 1648 NCS 2011 is rated for 5 passengers, while the Alumacraft All Weld MV 1546 DD Tunnel 2011 caps at 3. If you're regularly pulling extended family or a group of friends onto the water, the extra seats on the Alumacraft Riveted Jon 1648 NCS 2011 could be the deciding factor.

At this size, power-to-weight ratio matters more than outright horsepower. The Alumacraft Riveted Jon 1648 NCS 2011 comes in at 9 lbs per hp versus 14 lbs per hp for the Alumacraft All Weld MV 1546 DD Tunnel 2011. The lower the ratio the more explosive the acceleration - meaningful on a short RIB where bursts of speed, quick planing, and agility in surf or tight waterways define the experience.

Bottom line: Choose the Alumacraft Riveted Jon 1648 NCS 2011 if your priority is putting more people on the water - it handles 5 passengers and at 16,0 ft it has the deck room to back that rating up comfortably. The Alumacraft All Weld MV 1546 DD Tunnel 2011 is the smarter pick if you want a lighter, easier-to-trailer boat rated for 3 that costs less to run day-to-day.
General Boat Info
MakeAlumacraft
MakeAlumacraft
ModelAll Weld MV 1546 DD Tunnel
ModelRiveted Jon 1648 NCS
Model Year2011
Model Year2011
Measurements / Dimensions
Beam65 in.
Beam70 in.
Beam - Meters1.65
Beam - Meters1.78
Beam - Inches65
Beam - Inches70
Weight - Detail340 lbs.
Weight - Detail260 lbs.
Weight - kg154.22
Weight - kg117.93
Weight - lbs.340
Weight - lbs.260
Height - Detail20 in.
Height - Detail21 in.
Height - Meters0.51
Height - Meters0.53
Height - Inches20
Height - Inches21
Height [transom]15 in.
Height [transom]15 / 20 in.
Length - Feet15
Length - Feet16
Length overall - Detail15 ft. 0 in.
Length overall - Detail16 ft. 0 in.
Length overall - Meters4.57
Length overall - Meters4.88
Length overall - Inches180
Length overall - Inches192
Body / Hull
Hull materialAluminum
Hull materialAluminum
Hull thickness0.080 in.
Hull thickness0.070 in.
Hull typeModified Vee
Hull typeFlat
Engine and Drivetrain
Fuel typeGas
Fuel typeGas
Drive typeOutboard
Drive typeOutboard
Engine max25 hp
Engine max30 hp
Operational Info
Maximum capacity719 lbs.
Maximum capacity1,010 lbs.
Maximum people3
Maximum people5

Alumacraft All Weld MV 1546 DD Tunnel 2011 vs Alumacraft Riveted Jon 1648 NCS 2011 - Common Questions

Which is the larger boat - the Alumacraft All Weld MV 1546 DD Tunnel 2011 or the Alumacraft Riveted Jon 1648 NCS 2011?
The Alumacraft Riveted Jon 1648 NCS 2011 is the longer of the two at 16,0 feet overall. The Alumacraft All Weld MV 1546 DD Tunnel 2011 comes in at 15,0 feet, making it roughly 1,0 ft shorter - a meaningful difference in deck room and overall on-water presence.
Which is easier to trailer - the Alumacraft All Weld MV 1546 DD Tunnel 2011 or the Alumacraft Riveted Jon 1648 NCS 2011?
For trailering, the Alumacraft Riveted Jon 1648 NCS 2011 has the edge at 260 lbs dry weight versus 340 lbs for the Alumacraft All Weld MV 1546 DD Tunnel 2011. Add a motor (typically 300–500 lbs for an outboard in this class), gear, and a partial fuel load and the difference grows. Lighter is friendlier on smaller tow vehicles and on fuel economy while hauling.
How many people can each boat hold?
The Alumacraft All Weld MV 1546 DD Tunnel 2011 is Coast Guard rated for 3 passengers, while the Alumacraft Riveted Jon 1648 NCS 2011 is certified for 5. Note that legal capacity and comfortable capacity aren't always the same thing - on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.
Which boat has the better power-to-weight ratio?
The Alumacraft Riveted Jon 1648 NCS 2011 has a better power-to-weight ratio at 9 lbs per hp compared to 14 lbs per hp for the Alumacraft All Weld MV 1546 DD Tunnel 2011. A lower number means quicker acceleration and faster time to plane - the number that actually matters most on short, sporty boats like these.
Which boat is wider, and does it affect trailering?
The Alumacraft Riveted Jon 1648 NCS 2011 measures 70" wide, compared to 65" for the Alumacraft All Weld MV 1546 DD Tunnel 2011. The US standard-width towing limit is 8’6" (102") in most states - anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.
Are the Alumacraft All Weld MV 1546 DD Tunnel 2011 and Alumacraft Riveted Jon 1648 NCS 2011 from the same manufacturer?
Yes - both the Alumacraft All Weld MV 1546 DD Tunnel 2011 and the Alumacraft Riveted Jon 1648 NCS 2011 are built by Alumacraft. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.