Alumacraft All Weld MV 1546 DD Tunnel 2011 boat specs
Alumacraft
Alumacraft All Weld MV 1546 DD Tunnel 2011
2011
View full specs →
VS
Alumacraft Angler SC 2009 boat specs
Alumacraft
Alumacraft Angler SC 2009
2009
View full specs →

Alumacraft All Weld MV 1546 DD Tunnel 2011 vs Alumacraft Angler SC 2009: A Close Look at Two Modified-V Boats

Both the Alumacraft All Weld MV 1546 DD Tunnel 2011 and the Alumacraft Angler SC 2009 are modified-V designs, both built in aluminium, so the buying decision usually comes down to a handful of practical questions: how many people are you putting on the water, how far do you trailer, and what does your tow vehicle weigh?

On paper these two are close siblings in the size department - Alumacraft All Weld MV 1546 DD Tunnel 2011 at 15,0 ft versus Alumacraft Angler SC 2009 at 16,0 ft. Weight tells a clearer story for trailering families: the Alumacraft Angler SC 2009 tips the scales at 465 lbs - 125 lbs less than the Alumacraft All Weld MV 1546 DD Tunnel 2011 at 340 lbs. That difference is meaningful if you're working within a half-ton or three-quarter-ton truck's tow rating, especially once you factor in a motor, gear, and fuel.

The Alumacraft All Weld MV 1546 DD Tunnel 2011 carries a rated maximum of 25 hp. Engine data for the Alumacraft Angler SC 2009 wasn't available in our records - check the manufacturer's spec sheet before sizing a motor.

Both boats are rated for 3 passengers - a good fit for a family of four or five plus guests. Comfort at capacity is another matter; the longer hull typically means more seat options and better weight distribution.

Bottom line: The Alumacraft All Weld MV 1546 DD Tunnel 2011 and Alumacraft Angler SC 2009 are closely matched on the specs that matter most. Test-ride both on the water you actually use, check current dealer pricing, and factor in long-term service access before you sign.
General Boat Info
MakeAlumacraft
MakeAlumacraft
ModelAll Weld MV 1546 DD Tunnel
ModelAngler SC
Model Year2011
Model Year2009
Measurements / Dimensions
Beam65 in.
Beam65 in. (1.65 m) Bottom: 48 in (1.22 m)
Beam - Meters1.65
Beam - Meters1.65
Beam - Inches65
Beam - Inches65
Weight - Detail340 lbs.
Weight - Detail465 lbs. (211 kg)
Weight - kg154.22
Weight - kg210.92
Weight - lbs.340
Weight - lbs.465
Height - Detail20 in.
Height - Detailnot available
Height - Meters0.51
Height - Metersnot available
Height - Inches20
Height - Inchesnot available
Height [transom]15 in.
Height [transom]20 in. (0.51 m)
Length - Feet15
Length - Feet16
Length overall - Detail15 ft. 0 in.
Length overall - Detail16 ft. (4.8 m)
Length overall - Meters4.57
Length overall - Meters4.88
Length overall - Inches180
Length overall - Inches192
Depth - Detailnot available
Depth - Detail21 in. (0.53 m)
Depth - Centimetersnot available
Depth - Centimeters53.34
Depth - Inchesnot available
Depth - Inches21
Width [transom] - Detailnot available
Width [transom] - Detail71 in. (1.8 m)
Length - Metersnot available
Length - Meters4.8
Body / Hull
Hull materialAluminum
Hull materialAluminum
Hull thickness0.080 in.
Hull thickness0.102 in. (2.5 mm)
Hull typeModified Vee
Hull typeModified Vee
Engine and Drivetrain
Fuel typeGas
Fuel typeGas
Drive typeOutboard
Drive typeOutboard
Engine max25 hp
Engine maxnot available
Engine/s standardnot available
Engine/s standard35 hp (26 kW)
Operational Info
Maximum capacity719 lbs.
Maximum capacity800 lbs. (363 kg)
Maximum people3
Maximum people3

Alumacraft All Weld MV 1546 DD Tunnel 2011 vs Alumacraft Angler SC 2009 - Common Questions

Which is the larger boat - the Alumacraft All Weld MV 1546 DD Tunnel 2011 or the Alumacraft Angler SC 2009?
The Alumacraft Angler SC 2009 is the longer of the two at 16,0 feet overall. The Alumacraft All Weld MV 1546 DD Tunnel 2011 comes in at 15,0 feet, making it roughly 1,0 ft shorter - a meaningful difference in deck room and overall on-water presence.
Which is easier to trailer - the Alumacraft All Weld MV 1546 DD Tunnel 2011 or the Alumacraft Angler SC 2009?
For trailering, the Alumacraft All Weld MV 1546 DD Tunnel 2011 has the edge at 340 lbs dry weight versus 465 lbs for the Alumacraft Angler SC 2009. Add a motor (typically 300–500 lbs for an outboard in this class), gear, and a partial fuel load and the difference grows. Lighter is friendlier on smaller tow vehicles and on fuel economy while hauling.
What is the maximum horsepower rating for these boats?
The Alumacraft All Weld MV 1546 DD Tunnel 2011 has a documented max rating of 25 hp. Engine specifications for the Alumacraft Angler SC 2009 were not available in our database - check the OEM spec sheet or manufacturer's website for confirmation.
How many people can each boat hold?
The Alumacraft All Weld MV 1546 DD Tunnel 2011 is Coast Guard rated for 3 passengers, while the Alumacraft Angler SC 2009 is certified for 3. Note that legal capacity and comfortable capacity aren't always the same thing - on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.
Do these boats require an oversize trailer permit to tow on US highways?
Both the Alumacraft All Weld MV 1546 DD Tunnel 2011 and Alumacraft Angler SC 2009 share an 65 in. beam - meaning both sit right at the 8’6" threshold that most US states use for standard-width loads. In most states you can tow at that width without a special permit, but regulations vary. Always check the rules for your state and any states you'll be passing through before your first long haul.
Are the Alumacraft All Weld MV 1546 DD Tunnel 2011 and Alumacraft Angler SC 2009 from the same manufacturer?
Yes - both the Alumacraft All Weld MV 1546 DD Tunnel 2011 and the Alumacraft Angler SC 2009 are built by Alumacraft. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.