Alumacraft All Weld MV 1546 AW 2012 boat specs
Alumacraft
Alumacraft All Weld MV 1546 AW 2012
2012
View full specs →
VS
Alumacraft MV 1756 AW 2007 boat specs
Alumacraft
Alumacraft MV 1756 AW 2007
2007
View full specs →

Alumacraft All Weld MV 1546 AW 2012 vs Alumacraft MV 1756 AW 2007: A Close Look at Two Modified-V Boats

Both the Alumacraft All Weld MV 1546 AW 2012 and the Alumacraft MV 1756 AW 2007 are modified-V designs, both built in aluminium, so the buying decision usually comes down to a handful of practical questions: how many people are you putting on the water, how far do you trailer, and what does your tow vehicle weigh?

On paper these two are close siblings in the size department - Alumacraft All Weld MV 1546 AW 2012 at 15,0 ft versus Alumacraft MV 1756 AW 2007 at 17,0 ft. Weight tells a clearer story for trailering families: the Alumacraft MV 1756 AW 2007 tips the scales at 600 lbs - 260 lbs less than the Alumacraft All Weld MV 1546 AW 2012 at 340 lbs. That difference is meaningful if you're working within a half-ton or three-quarter-ton truck's tow rating, especially once you factor in a motor, gear, and fuel.

The power gap is worth calling out. Rated to 50 hp, the Alumacraft MV 1756 AW 2007 has a 25-hp advantage over the Alumacraft All Weld MV 1546 AW 2012's 25-hp ceiling - enough to notice on acceleration and at cruising speed, particularly with a full passenger load.

For family outings this is probably the sharpest distinction between the two. The Alumacraft MV 1756 AW 2007 is rated for 5 passengers, while the Alumacraft All Weld MV 1546 AW 2012 caps at 3. If you're regularly pulling extended family or a group of friends onto the water, the extra seats on the Alumacraft MV 1756 AW 2007 could be the deciding factor.

At this size, power-to-weight ratio matters more than outright horsepower. The Alumacraft MV 1756 AW 2007 comes in at 12 lbs per hp versus 14 lbs per hp for the Alumacraft All Weld MV 1546 AW 2012. The lower the ratio the more explosive the acceleration - meaningful on a short RIB where bursts of speed, quick planing, and agility in surf or tight waterways define the experience.

Bottom line: Choose the Alumacraft MV 1756 AW 2007 if your priority is putting more people on the water - it handles 5 passengers and at 17,0 ft it has the deck room to back that rating up comfortably. The Alumacraft All Weld MV 1546 AW 2012 is the smarter pick if you want a lighter, easier-to-trailer boat rated for 3 that costs less to run day-to-day.
General Boat Info
MakeAlumacraft
MakeAlumacraft
ModelAll Weld MV 1546 AW
ModelMV 1756 AW
Model Year2012
Model Year2007
Measurements / Dimensions
Beam65 in.
Beam83 in.
Beam - Meters1.65
Beam - Meters2.11
Beam - Inches65
Beam - Inches83
Weight - Detail340 lbs.
Weight - Detail600 lbs.
Weight - kg154.22
Weight - kg272.16
Weight - lbs.340
Weight - lbs.600
Height - Detail20 in.
Height - Detail24 in.
Height - Meters0.51
Height - Meters0.61
Height - Inches20
Height - Inches24
Height [transom]15 in.
Height [transom]21 in.
Length - Feet15
Length - Feet17
Length overall - Detail15 ft.
Length overall - Detail17 ft. 0 in.
Length overall - Meters4.57
Length overall - Meters5.18
Length overall - Inches180
Length overall - Inches204
Width [transom] - Detailnot available
Width [transom] - Detail56 in.
Body / Hull
Hull materialAluminum
Hull materialAluminum
Hull thickness0.080 in.
Hull thickness0.102 in.
Hull typeModified Vee
Hull typeModified Vee
Engine and Drivetrain
Fuel typeGas
Fuel typeGas
Drive typeOutboard
Drive typeOutboard
Engine max25 hp
Engine max50 hp
Operational Info
Maximum capacity719 lbs.
Maximum capacity825 lbs.
Maximum people3
Maximum people5

Alumacraft All Weld MV 1546 AW 2012 vs Alumacraft MV 1756 AW 2007 - Common Questions

Which is the larger boat - the Alumacraft All Weld MV 1546 AW 2012 or the Alumacraft MV 1756 AW 2007?
The Alumacraft MV 1756 AW 2007 is the longer of the two at 17,0 feet overall. The Alumacraft All Weld MV 1546 AW 2012 comes in at 15,0 feet, making it roughly 2,0 ft shorter - a meaningful difference in deck room and overall on-water presence.
Which is easier to trailer - the Alumacraft All Weld MV 1546 AW 2012 or the Alumacraft MV 1756 AW 2007?
For trailering, the Alumacraft All Weld MV 1546 AW 2012 has the edge at 340 lbs dry weight versus 600 lbs for the Alumacraft MV 1756 AW 2007. Add a motor (typically 300–500 lbs for an outboard in this class), gear, and a partial fuel load and the difference grows. Lighter is friendlier on smaller tow vehicles and on fuel economy while hauling.
Which boat can handle a bigger outboard?
The Alumacraft MV 1756 AW 2007 is rated to a maximum of 50 hp, giving it the larger power ceiling. The Alumacraft All Weld MV 1546 AW 2012 tops out at 25 hp. Keep in mind that maximum ratings are just that - matching the motor to the actual load and usage pattern usually matters more than chasing the ceiling.
How many people can each boat hold?
The Alumacraft All Weld MV 1546 AW 2012 is Coast Guard rated for 3 passengers, while the Alumacraft MV 1756 AW 2007 is certified for 5. Note that legal capacity and comfortable capacity aren't always the same thing - on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.
Which boat has the better power-to-weight ratio?
The Alumacraft MV 1756 AW 2007 has a better power-to-weight ratio at 12 lbs per hp compared to 14 lbs per hp for the Alumacraft All Weld MV 1546 AW 2012. A lower number means quicker acceleration and faster time to plane - the number that actually matters most on short, sporty boats like these.
Which boat is wider, and does it affect trailering?
The Alumacraft MV 1756 AW 2007 measures 83" wide, compared to 65" for the Alumacraft All Weld MV 1546 AW 2012. The US standard-width towing limit is 8’6" (102") in most states - anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.
Are the Alumacraft All Weld MV 1546 AW 2012 and Alumacraft MV 1756 AW 2007 from the same manufacturer?
Yes - both the Alumacraft All Weld MV 1546 AW 2012 and the Alumacraft MV 1756 AW 2007 are built by Alumacraft. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.