Alumacraft All Weld MV 1546 AW 2012 boat specs
Alumacraft
Alumacraft All Weld MV 1546 AW 2012
2012
View full specs →
VS
Alumacraft Crappie Jon 2012 boat specs
Alumacraft
Alumacraft Crappie Jon 2012
2012
View full specs →

Alumacraft All Weld MV 1546 AW 2012 vs Alumacraft Crappie Jon 2012: Same Brand, Different Boat

The Alumacraft All Weld MV 1546 AW 2012 is a modified-V design and the Alumacraft Crappie Jon 2012 is a flat-bottom design, so you're likely deciding between two noticeably different on-water experiences. Hull type shapes everything from ride quality and fuel burn to dock handling and resale trajectory.

On paper these two are close siblings in the size department - Alumacraft All Weld MV 1546 AW 2012 at 15,0 ft versus Alumacraft Crappie Jon 2012 at 14,0 ft. At 340 lbs and 330 lbs respectively, both sit in a similar weight class - either should pair comfortably with most mid-size SUVs and half-ton trucks, though always confirm your specific tow rating with the motor added.

Both boats share a closely matched power ceiling - 25 hp for the Alumacraft All Weld MV 1546 AW 2012 and 15 hp for the Alumacraft Crappie Jon 2012. Real-world performance will come down more to which motor is actually bolted on, its load at the time, and whether it's a 4-stroke or 2-stroke setup.

For family outings this is probably the sharpest distinction between the two. The Alumacraft All Weld MV 1546 AW 2012 is rated for 3 passengers, while the Alumacraft Crappie Jon 2012 caps at 2. If you're regularly pulling extended family or a group of friends onto the water, the extra seats on the Alumacraft All Weld MV 1546 AW 2012 could be the deciding factor.

At this size, power-to-weight ratio matters more than outright horsepower. The Alumacraft All Weld MV 1546 AW 2012 comes in at 14 lbs per hp versus 22 lbs per hp for the Alumacraft Crappie Jon 2012. The lower the ratio the more explosive the acceleration - meaningful on a short RIB where bursts of speed, quick planing, and agility in surf or tight waterways define the experience.

Bottom line: Choose the Alumacraft All Weld MV 1546 AW 2012 if your priority is putting more people on the water - it handles 3 passengers and at 15,0 ft it has the deck room to back that rating up comfortably. The Alumacraft Crappie Jon 2012 is the smarter pick if you want a lighter, easier-to-trailer boat rated for 2 that costs less to run day-to-day.
General Boat Info
MakeAlumacraft
MakeAlumacraft
ModelAll Weld MV 1546 AW
ModelCrappie Jon
Model Year2012
Model Year2012
Measurements / Dimensions
Beam65 in.
Beam64 / 42 in. (1.63 / 1.07 m)
Beam - Meters1.65
Beam - Meters1.07
Beam - Inches65
Beam - Inches42
Weight - Detail340 lbs.
Weight - Detail330 lbs. (150 kg)
Weight - kg154.22
Weight - kg149.69
Weight - lbs.340
Weight - lbs.330
Height - Detail20 in.
Height - Detail20 in. (0.51 m)
Height - Meters0.51
Height - Meters0.51
Height - Inches20
Height - Inches20
Height [transom]15 in.
Height [transom]15 in. (0.38 m)
Length - Feet15
Length - Feet14
Length overall - Detail15 ft.
Length overall - Detail14 ft. (4.27 m)
Length overall - Meters4.57
Length overall - Meters4.27
Length overall - Inches180
Length overall - Inches168
Width [transom] - Detailnot available
Width [transom] - Detail62 in. (1.58 m)
Body / Hull
Hull materialAluminum
Hull materialAluminum
Hull thickness0.080 in.
Hull thicknessBottom and Sides: 0.063 in. (1.6 mm)
Hull typeModified Vee
Hull typeFlat
Engine and Drivetrain
Fuel typeGas
Fuel typeGas
Drive typeOutboard
Drive typeOutboard
Engine max25 hp
Engine max15 hp (11 kW)
Operational Info
Maximum capacity719 lbs.
Maximum capacity550 lbs. (249 kg)
Maximum people3
Maximum people2
Storagenot available
StorageLivewell: 5 gal. (18.93 l)

Alumacraft All Weld MV 1546 AW 2012 vs Alumacraft Crappie Jon 2012 - Common Questions

Which is the larger boat - the Alumacraft All Weld MV 1546 AW 2012 or the Alumacraft Crappie Jon 2012?
The Alumacraft All Weld MV 1546 AW 2012 is the longer of the two at 15,0 feet overall. The Alumacraft Crappie Jon 2012 comes in at 14,0 feet, making it roughly 1,0 ft shorter - a meaningful difference in deck room and overall on-water presence.
Which is easier to trailer - the Alumacraft All Weld MV 1546 AW 2012 or the Alumacraft Crappie Jon 2012?
For trailering, the Alumacraft Crappie Jon 2012 has the edge at 330 lbs dry weight versus 340 lbs for the Alumacraft All Weld MV 1546 AW 2012. Add a motor (typically 300–500 lbs for an outboard in this class), gear, and a partial fuel load and the difference grows. Lighter is friendlier on smaller tow vehicles and on fuel economy while hauling.
Which boat can handle a bigger outboard?
The Alumacraft All Weld MV 1546 AW 2012 is rated to a maximum of 25 hp, giving it the larger power ceiling. The Alumacraft Crappie Jon 2012 tops out at 15 hp. Keep in mind that maximum ratings are just that - matching the motor to the actual load and usage pattern usually matters more than chasing the ceiling.
How many people can each boat hold?
The Alumacraft All Weld MV 1546 AW 2012 is Coast Guard rated for 3 passengers, while the Alumacraft Crappie Jon 2012 is certified for 2. Note that legal capacity and comfortable capacity aren't always the same thing - on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.
Which boat has the better power-to-weight ratio?
The Alumacraft All Weld MV 1546 AW 2012 has a better power-to-weight ratio at 14 lbs per hp compared to 22 lbs per hp for the Alumacraft Crappie Jon 2012. A lower number means quicker acceleration and faster time to plane - the number that actually matters most on short, sporty boats like these.
Which boat is wider, and does it affect trailering?
The Alumacraft All Weld MV 1546 AW 2012 measures 65" wide, compared to 42" for the Alumacraft Crappie Jon 2012. The US standard-width towing limit is 8’6" (102") in most states - anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.
Are the Alumacraft All Weld MV 1546 AW 2012 and Alumacraft Crappie Jon 2012 from the same manufacturer?
Yes - both the Alumacraft All Weld MV 1546 AW 2012 and the Alumacraft Crappie Jon 2012 are built by Alumacraft. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.