Alumacraft 1648 2006 boat specs
Alumacraft
Alumacraft 1648 2006
2006
View full specs →
VS
Alumacraft V16 2004 boat specs
Alumacraft
Alumacraft V16 2004
2004
View full specs →

Alumacraft 1648 2006 vs Alumacraft V16 2004 — Same Brand, Different Boat

The Alumacraft 1648 2006 vs Alumacraft V16 2004 comparison sits squarely in the category of decisions where specs alone won't tell the whole story — intended use, storage, and long-term ownership costs all factor in.

Both boats share a closely matched power ceiling — 35 hp for the Alumacraft 1648 2006 and 40 hp for the Alumacraft V16 2004. Real-world performance will come down more to which motor is actually bolted on, its load at the time, and whether it's a 4-stroke or 2-stroke setup.

Both boats are rated for 5 passengers — a good fit for a family of four or five plus guests. Comfort at capacity is another matter; the longer hull typically means more seat options and better weight distribution.

Bottom line: The Alumacraft 1648 2006 and Alumacraft V16 2004 are closely matched on the specs that matter most. Test-ride both on the water you actually use, check current dealer pricing, and factor in long-term service access before you sign.
General Boat Info
MakeAlumacraft
MakeAlumacraft
Model1648
ModelV16
Model Year2006
Model Year2004
Measurements / Dimensions
Beam70 in
Beam70 in
Beam - Meters1.78
Beam - Meters1.78
Beam - Inches7
Beam - Inches7
Weight - Detail285 lbs
Weight - Detail287 lbs
Weight - kg129.27
Weight - kg130.18
Weight - lbs.285
Weight - lbs.287
Width [transom] - Detail48 in
Width [transom] - Detailnot available
Height - Detail21 in
Height - Detail30 in
Height - Meters0.53
Height - Meters0.76
Height - Inches21
Height - Inches3
Height [transom]15 in. or 20 in
Height [transom]15/20 in
Length - Feet16
Length - Feetnot available
Length overall - Detail16 ft. 0 in
Length overall - Detail16 ft. 7 in
Length overall - Meters4.88
Length overall - Meters5.05
Length overall - Inches192
Length overall - Inches199
Draft [drive up] - Detailnot available
Draft [drive up] - DetailN/A
Body / Hull
Hull materialAluminum
Hull materialAluminum
Hull thickness.070 in
Hull thicknessnot available
Hull typeFlat
Hull typenot available
Engine and Drivetrain
Fuel typeGas
Fuel typenot available
Drive typeOutboard
Drive typenot available
Engine max35 hp
Engine max40 HP
Fuel tank capacity - Detailnot available
Fuel tank capacity - DetailN/A
Operational Info
StorageSeat storage
Storagenot available
Maximum capacity1,010 lbs
Maximum capacitynot available
Maximum people5
Maximum people5 persons
Water capacitynot available
Water capacityN/A
Trailer Info
Trailer - Detailnot available
Trailer - DetailN/A

Alumacraft 1648 2006 vs Alumacraft V16 2004 — Common Questions

Which is easier to trailer — the Alumacraft 1648 2006 or the Alumacraft V16 2004?
For trailering, the Alumacraft 1648 2006 has the edge at 285 lbs dry weight versus 287 lbs for the Alumacraft V16 2004. Add a motor (typically 300–500 lbs for an outboard in this class), gear, and a partial fuel load and the difference grows. Lighter is friendlier on smaller tow vehicles and on fuel economy while hauling.
How many people can each boat hold?
The Alumacraft 1648 2006 is Coast Guard rated for 5 passengers, while the Alumacraft V16 2004 is certified for 5. Note that legal capacity and comfortable capacity aren't always the same thing — on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.
Do these boats require an oversize trailer permit to tow on US highways?
Both the Alumacraft 1648 2006 and Alumacraft V16 2004 share an 70 in beam — meaning both sit right at the 8’6" threshold that most US states use for standard-width loads. In most states you can tow at that width without a special permit, but regulations vary. Always check the rules for your state and any states you'll be passing through before your first long haul.
Are the Alumacraft 1648 2006 and Alumacraft V16 2004 from the same manufacturer?
Yes — both the Alumacraft 1648 2006 and the Alumacraft V16 2004 are built by Alumacraft. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.