Alumacraft 1648 NCS 2005 boat specs
Alumacraft
Alumacraft 1648 NCS 2005
2005
View full specs →
VS
Alumacraft PF170 2008 boat specs
Alumacraft
Alumacraft PF170 2008
2008
View full specs →

Alumacraft 1648 NCS 2005 vs Alumacraft PF170 2008: Same Brand, Different Boat

The Alumacraft 1648 NCS 2005 vs Alumacraft PF170 2008 comparison sits squarely in the category of decisions where specs alone won't tell the whole story: intended use, storage, and long-term ownership costs all factor in.

On paper these two are close siblings in the size department - Alumacraft 1648 NCS 2005 at 16,0 ft versus Alumacraft PF170 2008 at 17,0 ft. Weight tells a clearer story for trailering families: the Alumacraft PF170 2008 tips the scales at 800 lbs - 540 lbs less than the Alumacraft 1648 NCS 2005 at 260 lbs. That difference is meaningful if you're working within a half-ton or three-quarter-ton truck's tow rating, especially once you factor in a motor, gear, and fuel.

The power gap is worth calling out. Rated to 60 hp, the Alumacraft PF170 2008 has a 25-hp advantage over the Alumacraft 1648 NCS 2005's 35-hp ceiling - enough to notice on acceleration and at cruising speed, particularly with a full passenger load.

For family outings this is probably the sharpest distinction between the two. The Alumacraft 1648 NCS 2005 is rated for 5 passengers, while the Alumacraft PF170 2008 caps at 4. If you're regularly pulling extended family or a group of friends onto the water, the extra seats on the Alumacraft 1648 NCS 2005 could be the deciding factor.

At this size, power-to-weight ratio matters more than outright horsepower. The Alumacraft 1648 NCS 2005 comes in at 7 lbs per hp versus 13 lbs per hp for the Alumacraft PF170 2008. The lower the ratio the more explosive the acceleration - meaningful on a short RIB where bursts of speed, quick planing, and agility in surf or tight waterways define the experience.

Bottom line: Choose the Alumacraft 1648 NCS 2005 if your priority is putting more people on the water - it handles 5 passengers and at 16,0 ft it has the deck room to back that rating up comfortably. The Alumacraft PF170 2008 is the smarter pick if you want a lighter, easier-to-trailer boat rated for 4 that costs less to run day-to-day.
General Boat Info
MakeAlumacraft
MakeAlumacraft
Model1648 NCS
ModelPF170
Model Year2005
Model Year2008
Measurements / Dimensions
Beam70 in.
Beam74 in. (1.88 m) Bottom: 52 in. (1.32 m)
Beam - Meters1.78
Beam - Meters1.88
Beam - Inches70
Beam - Inches74
Weight - Detail260 lbs.
Weight - Detail800 lbs. (363 kg)
Weight - kg117.93
Weight - kg362.87
Weight - lbs.260
Weight - lbs.800
Width [transom] - Detail48 in.
Width [transom] - Detail74 in. (1.88 m)
Height - Detail21 in.
Height - Detailnot available
Height - Meters0.53
Height - Metersnot available
Height - Inches21
Height - Inchesnot available
Height [transom]15 in. or 20 in.
Height [transom]22 in. (0.56 m)
Length - Feet16
Length - Feet17
Length overall - Detail16 ft. 0 in.
Length overall - Detail17 ft. 0 in. (5.18 m)
Length overall - Meters4.88
Length overall - Meters5.18
Length overall - Inches192
Length overall - Inches204
Depth - Detailnot available
Depth - Detail22 in. (0.56 m)
Depth - Centimetersnot available
Depth - Centimeters55.88
Depth - Inchesnot available
Depth - Inches22
Length - Metersnot available
Length - Meters5.18
Body / Hull
Hull materialAluminum
Hull materialAluminum
Hull thicknessBottom/sides: .070 in.
Hull thickness0.102 in. (2.5 mm)
Hull typenot available
Hull typeModified Vee
Engine and Drivetrain
Engine max35 hp
Engine max60 hp (45 kW)
Fuel typenot available
Fuel typeGas
Drive typenot available
Drive typeOutboard
Operational Info
Maximum people5
Maximum people4
Maximum capacitynot available
Maximum capacity900 lbs. (408 kg)

Alumacraft 1648 NCS 2005 vs Alumacraft PF170 2008 - Common Questions

Which is the larger boat - the Alumacraft 1648 NCS 2005 or the Alumacraft PF170 2008?
The Alumacraft PF170 2008 is the longer of the two at 17,0 feet overall. The Alumacraft 1648 NCS 2005 comes in at 16,0 feet, making it roughly 1,0 ft shorter - a meaningful difference in deck room and overall on-water presence.
Which is easier to trailer - the Alumacraft 1648 NCS 2005 or the Alumacraft PF170 2008?
For trailering, the Alumacraft 1648 NCS 2005 has the edge at 260 lbs dry weight versus 800 lbs for the Alumacraft PF170 2008. Add a motor (typically 300–500 lbs for an outboard in this class), gear, and a partial fuel load and the difference grows. Lighter is friendlier on smaller tow vehicles and on fuel economy while hauling.
Which boat can handle a bigger outboard?
The Alumacraft PF170 2008 is rated to a maximum of 60 hp, giving it the larger power ceiling. The Alumacraft 1648 NCS 2005 tops out at 35 hp. Keep in mind that maximum ratings are just that - matching the motor to the actual load and usage pattern usually matters more than chasing the ceiling.
How many people can each boat hold?
The Alumacraft 1648 NCS 2005 is Coast Guard rated for 5 passengers, while the Alumacraft PF170 2008 is certified for 4. Note that legal capacity and comfortable capacity aren't always the same thing - on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.
Which boat has the better power-to-weight ratio?
The Alumacraft 1648 NCS 2005 has a better power-to-weight ratio at 7 lbs per hp compared to 13 lbs per hp for the Alumacraft PF170 2008. A lower number means quicker acceleration and faster time to plane - the number that actually matters most on short, sporty boats like these.
Which boat is wider, and does it affect trailering?
The Alumacraft PF170 2008 measures 74" wide, compared to 70" for the Alumacraft 1648 NCS 2005. The US standard-width towing limit is 8’6" (102") in most states - anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.
Are the Alumacraft 1648 NCS 2005 and Alumacraft PF170 2008 from the same manufacturer?
Yes - both the Alumacraft 1648 NCS 2005 and the Alumacraft PF170 2008 are built by Alumacraft. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.