Alumacraft 1648 NCS 2004 boat specs
Alumacraft
Alumacraft 1648 NCS 2004
2004
View full specs →
VS
Alumacraft Riveted Jon MV 1648 SS 2011 boat specs
Alumacraft
Alumacraft Riveted Jon MV 1648 SS 2011
2011
View full specs →

Alumacraft 1648 NCS 2004 vs Alumacraft Riveted Jon MV 1648 SS 2011 — Same Brand, Different Boat

The Alumacraft 1648 NCS 2004 vs Alumacraft Riveted Jon MV 1648 SS 2011 comparison sits squarely in the category of decisions where specs alone won't tell the whole story — intended use, storage, and long-term ownership costs all factor in.

Both boats share a closely matched power ceiling — 35 hp for the Alumacraft 1648 NCS 2004 and 30 hp for the Alumacraft Riveted Jon MV 1648 SS 2011. Real-world performance will come down more to which motor is actually bolted on, its load at the time, and whether it's a 4-stroke or 2-stroke setup.

Both boats are rated for 5 passengers — a good fit for a family of four or five plus guests. Comfort at capacity is another matter; the longer hull typically means more seat options and better weight distribution.

Bottom line: The Alumacraft 1648 NCS 2004 and Alumacraft Riveted Jon MV 1648 SS 2011 are closely matched on the specs that matter most. Test-ride both on the water you actually use, check current dealer pricing, and factor in long-term service access before you sign.
General Boat Info
MakeAlumacraft
MakeAlumacraft
Model1648 NCS
ModelRiveted Jon MV 1648 SS
Model Year2004
Model Year2011
Measurements / Dimensions
Beam70 in
Beam70 in
Beam - Meters1.78
Beam - Meters1.78
Beam - Inches7
Beam - Inches7
Weight - Detail260 lbs
Weight - Detail280 lbs
Weight - kg117.93
Weight - kg127.01
Weight - lbs.26
Weight - lbs.28
Height - Detail21 in
Height - Detail21 in
Height - Meters0.53
Height - Meters0.53
Height - Inches21
Height - Inches21
Height [transom]15 in
Height [transom]15 / 20 in
Length overall - Detail16 ft
Length overall - Detail16 ft. 0 in
Length overall - Meters4.88
Length overall - Meters4.88
Length overall - Inches192
Length overall - Inches192
Length - Feetnot available
Length - Feet16
Body / Hull
Hull materialAluminum
Hull materialAluminum
Hull thicknessnot available
Hull thickness0.070 in
Hull typenot available
Hull typeModified Vee
Engine and Drivetrain
Engine max35 hp w/Tiller Steering
Engine max30 hp
Fuel typenot available
Fuel typeGas
Drive typenot available
Drive typeOutboard
Operational Info
Maximum people5 persons
Maximum people5
Maximum capacitynot available
Maximum capacity1,010 lbs

Alumacraft 1648 NCS 2004 vs Alumacraft Riveted Jon MV 1648 SS 2011 — Common Questions

Which is easier to trailer — the Alumacraft 1648 NCS 2004 or the Alumacraft Riveted Jon MV 1648 SS 2011?
For trailering, the Alumacraft 1648 NCS 2004 has the edge at 26 lbs dry weight versus 28 lbs for the Alumacraft Riveted Jon MV 1648 SS 2011. Add a motor (typically 300–500 lbs for an outboard in this class), gear, and a partial fuel load and the difference grows. Lighter is friendlier on smaller tow vehicles and on fuel economy while hauling.
How many people can each boat hold?
The Alumacraft 1648 NCS 2004 is Coast Guard rated for 5 passengers, while the Alumacraft Riveted Jon MV 1648 SS 2011 is certified for 5. Note that legal capacity and comfortable capacity aren't always the same thing — on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.
Do these boats require an oversize trailer permit to tow on US highways?
Both the Alumacraft 1648 NCS 2004 and Alumacraft Riveted Jon MV 1648 SS 2011 share an 70 in beam — meaning both sit right at the 8’6" threshold that most US states use for standard-width loads. In most states you can tow at that width without a special permit, but regulations vary. Always check the rules for your state and any states you'll be passing through before your first long haul.
Are the Alumacraft 1648 NCS 2004 and Alumacraft Riveted Jon MV 1648 SS 2011 from the same manufacturer?
Yes — both the Alumacraft 1648 NCS 2004 and the Alumacraft Riveted Jon MV 1648 SS 2011 are built by Alumacraft. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.