Alumacraft 1542 2010 vs Alumacraft MV 1544 AW 2003 - Boat Spec Comparison

Q: Which is easier to trailer — the Alumacraft 1542 2010 or the Alumacraft MV 1544 AW 2003?

For trailering, the Alumacraft 1542 2010 has the edge at 21 lbs dry weight versus 25 lbs for the Alumacraft MV 1544 AW 2003. Add a motor (typically 300–500 lbs for an outboard in this class), gear, and a partial fuel load and the difference grows. Lighter is friendlier on smaller tow vehicles and on fuel economy while hauling.

Q: What is the maximum horsepower rating for these boats?

The Alumacraft MV 1544 AW 2003 has a documented max rating of 25 hp. Engine specifications for the Alumacraft 1542 2010 were not available in our database — check the OEM spec sheet or manufacturer's website for confirmation.

Q: How many people can each boat hold?

The Alumacraft 1542 2010 is Coast Guard rated for 4 passengers, while the Alumacraft MV 1544 AW 2003 is certified for 4. Note that legal capacity and comfortable capacity aren't always the same thing — on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.

Q: Which boat is wider, and does it affect trailering?

The Alumacraft MV 1544 AW 2003 measures 65" wide, compared to 62" for the Alumacraft 1542 2010. The US standard-width towing limit is 8’6" (102") in most states — anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.

Q: Are the Alumacraft 1542 2010 and Alumacraft MV 1544 AW 2003 from the same manufacturer?

Yes — both the Alumacraft 1542 2010 and the Alumacraft MV 1544 AW 2003 are built by Alumacraft. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.

Boat Comparison

Alumacraft 1542 2010 vs Alumacraft MV 1544 AW 2003

Alumacraft

Alumacraft 1542 2010

2010

View full specs →

Alumacraft

Alumacraft MV 1544 AW 2003

2003

View full specs →

Detailed Evaluation & Buyer Recommendation

Alumacraft 1542 2010 vs Alumacraft MV 1544 AW 2003 — Same Brand, Different Boat

The Alumacraft 1542 2010 vs Alumacraft MV 1544 AW 2003 comparison sits squarely in the category of decisions where specs alone won't tell the whole story — intended use, storage, and long-term ownership costs all factor in.

The Alumacraft MV 1544 AW 2003 tops out at 25 hp. Engine specs for the Alumacraft 1542 2010 aren't listed — confirm with a dealer before selecting an outboard.

Both boats are rated for 4 passengers — a good fit for a family of four or five plus guests. Comfort at capacity is another matter; the longer hull typically means more seat options and better weight distribution.

Bottom line: The Alumacraft 1542 2010 and Alumacraft MV 1544 AW 2003 are closely matched on the specs that matter most. Test-ride both on the water you actually use, check current dealer pricing, and factor in long-term service access before you sign.

General Boat Info

MakeAlumacraft

Model1542

ModelMV 1544 AW

Model Year201

Model Year2003

Measurements / Dimensions

Beam62 in. (1.58 m)

Beam65 in

Beam - Meters1.57

Beam - Meters1.65

Beam - Inches62

Beam - Inches65

Weight - Detail210 lbs. (95.25 kg)

Weight - Detail250 lbs

Weight - kg95.25

Weight - kg113.4

Weight - lbs.21

Weight - lbs.25

Width [transom] - Detail42 in. (1.07 m)

Width [transom] - Detailnot available

Height - Detail20 in. (.51 m)

Height - Detail20 in

Height - Meters0.51

Height - Inches2

Height [transom]15 in. (.38 m)

Height [transom]15 in

Length - Meters4.58

Length - Metersnot available

Length - Feet15

Length - Feetnot available

Length overall - Detail15 ft. (4.58 m)

Length overall - Detail15 ft

Length overall - Meters4.57

Length overall - Inches18

Draft [drive up] - Detailnot available

Draft [drive up] - DetailN/A

Body / Hull

Hull materialAluminum

Hull thickness0.063 in. (1.6 mm)

Hull thicknessnot available

Hull typeFlat

Hull typenot available

Engine and Drivetrain

Engine/s standard25 hp (19 kW)

Engine/s standard25 hp

Fuel typeGas

Fuel typenot available

Drive typeOutboard

Drive typenot available

Fuel tank capacity - Detailnot available

Fuel tank capacity - DetailN/A

Engine maxnot available

Engine max25 hp TillerMaximum outboard power w/Tiller Steering

Operational Info

Maximum capacity775 lbs. (352 kg)

Maximum capacitynot available

Maximum people4

Maximum people4 persons

Water capacitynot available

Water capacityN/A

Trailer Info

Trailer - Detailnot available

Trailer - DetailN/A

Alumacraft 1542 2010 vs Alumacraft MV 1544 AW 2003 — Common Questions

Which is easier to trailer — the Alumacraft 1542 2010 or the Alumacraft MV 1544 AW 2003?

For trailering, the Alumacraft 1542 2010 has the edge at 21 lbs dry weight versus 25 lbs for the Alumacraft MV 1544 AW 2003. Add a motor (typically 300–500 lbs for an outboard in this class), gear, and a partial fuel load and the difference grows. Lighter is friendlier on smaller tow vehicles and on fuel economy while hauling.

What is the maximum horsepower rating for these boats?

The Alumacraft MV 1544 AW 2003 has a documented max rating of 25 hp. Engine specifications for the Alumacraft 1542 2010 were not available in our database — check the OEM spec sheet or manufacturer's website for confirmation.

How many people can each boat hold?

The Alumacraft 1542 2010 is Coast Guard rated for 4 passengers, while the Alumacraft MV 1544 AW 2003 is certified for 4. Note that legal capacity and comfortable capacity aren't always the same thing — on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.

Which boat is wider, and does it affect trailering?

The Alumacraft MV 1544 AW 2003 measures 65" wide, compared to 62" for the Alumacraft 1542 2010. The US standard-width towing limit is 8’6" (102") in most states — anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.

Are the Alumacraft 1542 2010 and Alumacraft MV 1544 AW 2003 from the same manufacturer?

Yes — both the Alumacraft 1542 2010 and the Alumacraft MV 1544 AW 2003 are built by Alumacraft. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.

← Alumacraft 1542 2010 full specs ← Alumacraft MV 1544 AW 2003 full specs