Alumacraft 1448 2005 vs Alumacraft MV 1650 AW SC 2004 - Boat Spec Comparison

Q: Which is easier to trailer — the Alumacraft 1448 2005 or the Alumacraft MV 1650 AW SC 2004?

For trailering, the Alumacraft 1448 2005 has the edge at 26 lbs dry weight versus 575 lbs for the Alumacraft MV 1650 AW SC 2004. Add a motor (typically 300–500 lbs for an outboard in this class), gear, and a partial fuel load and the difference grows. Lighter is friendlier on smaller tow vehicles and on fuel economy while hauling.

Q: What is the maximum horsepower rating for these boats?

The Alumacraft 1448 2005 has a documented max rating of 25 hp. Engine specifications for the Alumacraft MV 1650 AW SC 2004 were not available in our database — check the OEM spec sheet or manufacturer's website for confirmation.

Q: How many people can each boat hold?

The Alumacraft 1448 2005 is Coast Guard rated for 5 passengers, while the Alumacraft MV 1650 AW SC 2004 is certified for 5. Note that legal capacity and comfortable capacity aren't always the same thing — on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.

Q: Which boat is wider, and does it affect trailering?

The Alumacraft MV 1650 AW SC 2004 measures 74" wide, compared to 7" for the Alumacraft 1448 2005. The US standard-width towing limit is 8’6" (102") in most states — anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.

Q: Are the Alumacraft 1448 2005 and Alumacraft MV 1650 AW SC 2004 from the same manufacturer?

Yes — both the Alumacraft 1448 2005 and the Alumacraft MV 1650 AW SC 2004 are built by Alumacraft. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.

Boat Comparison

Alumacraft 1448 2005 vs Alumacraft MV 1650 AW SC 2004

Alumacraft

Alumacraft 1448 2005

2005

View full specs →

Alumacraft

Alumacraft MV 1650 AW SC 2004

2004

View full specs →

Detailed Evaluation & Buyer Recommendation

Alumacraft 1448 2005 vs Alumacraft MV 1650 AW SC 2004 — Same Brand, Different Boat

The Alumacraft 1448 2005 vs Alumacraft MV 1650 AW SC 2004 comparison sits squarely in the category of decisions where specs alone won't tell the whole story — intended use, storage, and long-term ownership costs all factor in.

The Alumacraft 1448 2005 carries a rated maximum of 25 hp. Engine data for the Alumacraft MV 1650 AW SC 2004 wasn't available in our records — check the manufacturer's spec sheet before sizing a motor.

Both boats are rated for 5 passengers — a good fit for a family of four or five plus guests. Comfort at capacity is another matter; the longer hull typically means more seat options and better weight distribution.

Bottom line: The Alumacraft 1448 2005 and Alumacraft MV 1650 AW SC 2004 are closely matched on the specs that matter most. Test-ride both on the water you actually use, check current dealer pricing, and factor in long-term service access before you sign.

General Boat Info

MakeAlumacraft

Model1448

ModelMV 1650 AW SC

Model Year2005

Model Year2004

Measurements / Dimensions

Beam70 in

Beam74 in

Beam - Meters1.78

Beam - Meters1.88

Beam - Inches7

Beam - Inches74

Weight - Detail260 lbs

Weight - Detail575 lbs

Weight - kg117.93

Weight - kg260.82

Weight - lbs.26

Weight - lbs.575

Width [transom] - Detail48 in

Width [transom] - Detailnot available

Height - Detail21 in

Height - Detail22 in

Height - Meters0.53

Height - Meters0.56

Height - Inches21

Height - Inches22

Height [transom]15 in. or 20 in

Height [transom]21 in

Length - Feet14

Length - Feetnot available

Length overall - Detail14 ft. 0 in

Length overall - Detail16 ft

Length overall - Meters4.27

Length overall - Meters4.88

Length overall - Inches168

Length overall - Inches192

Draft [drive up] - Detailnot available

Draft [drive up] - DetailN/A

Body / Hull

Hull materialAluminum

Hull thicknessBottom/sides: .070 in

Hull thicknessnot available

Engine and Drivetrain

Engine max25 hp

Engine maxnot available

Engine/s standardnot available

Engine/s standard60 hp

Fuel tank capacity - Detailnot available

Fuel tank capacity - DetailN/A

Operational Info

Maximum people5

Maximum people5 persons

Water capacitynot available

Water capacityN/A

Trailer Info

Trailer - Detailnot available

Trailer - DetailN/A

Alumacraft 1448 2005 vs Alumacraft MV 1650 AW SC 2004 — Common Questions

Which is easier to trailer — the Alumacraft 1448 2005 or the Alumacraft MV 1650 AW SC 2004?

For trailering, the Alumacraft 1448 2005 has the edge at 26 lbs dry weight versus 575 lbs for the Alumacraft MV 1650 AW SC 2004. Add a motor (typically 300–500 lbs for an outboard in this class), gear, and a partial fuel load and the difference grows. Lighter is friendlier on smaller tow vehicles and on fuel economy while hauling.

What is the maximum horsepower rating for these boats?

The Alumacraft 1448 2005 has a documented max rating of 25 hp. Engine specifications for the Alumacraft MV 1650 AW SC 2004 were not available in our database — check the OEM spec sheet or manufacturer's website for confirmation.

How many people can each boat hold?

The Alumacraft 1448 2005 is Coast Guard rated for 5 passengers, while the Alumacraft MV 1650 AW SC 2004 is certified for 5. Note that legal capacity and comfortable capacity aren't always the same thing — on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.

Which boat is wider, and does it affect trailering?

The Alumacraft MV 1650 AW SC 2004 measures 74" wide, compared to 7" for the Alumacraft 1448 2005. The US standard-width towing limit is 8’6" (102") in most states — anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.

Are the Alumacraft 1448 2005 and Alumacraft MV 1650 AW SC 2004 from the same manufacturer?

Yes — both the Alumacraft 1448 2005 and the Alumacraft MV 1650 AW SC 2004 are built by Alumacraft. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.

← Alumacraft 1448 2005 full specs ← Alumacraft MV 1650 AW SC 2004 full specs