The Alumacraft 1442 2007 is a flat-bottom design and the Alumacraft MV 1546 AW DD Tunnel 2009 is a modified-V design, so you're likely deciding between two noticeably different on-water experiences. Hull type shapes everything from ride quality and fuel burn to dock handling and resale trajectory.
On paper these two are close siblings in the size department - Alumacraft 1442 2007 at 14,0 ft versus Alumacraft MV 1546 AW DD Tunnel 2009 at 15,0 ft. Weight tells a clearer story for trailering families: the Alumacraft MV 1546 AW DD Tunnel 2009 tips the scales at 340 lbs - 150 lbs less than the Alumacraft 1442 2007 at 190 lbs. That difference is meaningful if you're working within a half-ton or three-quarter-ton truck's tow rating, especially once you factor in a motor, gear, and fuel.
Both boats share a closely matched power ceiling - 25 hp for the Alumacraft 1442 2007 and 25 hp for the Alumacraft MV 1546 AW DD Tunnel 2009. Real-world performance will come down more to which motor is actually bolted on, its load at the time, and whether it's a 4-stroke or 2-stroke setup.
Both boats are rated for 4 passengers - a good fit for a family of four or five plus guests. Comfort at capacity is another matter; the longer hull typically means more seat options and better weight distribution.
At this size, power-to-weight ratio matters more than outright horsepower. The Alumacraft 1442 2007 comes in at 8 lbs per hp versus 14 lbs per hp for the Alumacraft MV 1546 AW DD Tunnel 2009. The lower the ratio the more explosive the acceleration - meaningful on a short RIB where bursts of speed, quick planing, and agility in surf or tight waterways define the experience.
Bottom line: The Alumacraft 1442 2007 and Alumacraft MV 1546 AW DD Tunnel 2009 are closely matched on the specs that matter most. Test-ride both on the water you actually use, check current dealer pricing, and factor in long-term service access before you sign.