Alumacraft 1442 NCS 2013 boat specs
Alumacraft
Alumacraft 1442 NCS 2013
2013
View full specs →
VS
Alumacraft All Weld MV 1546 DD Tunnel 2011 boat specs
Alumacraft
Alumacraft All Weld MV 1546 DD Tunnel 2011
2011
View full specs →

Alumacraft 1442 NCS 2013 vs Alumacraft All Weld MV 1546 DD Tunnel 2011: Same Brand, Different Boat

The Alumacraft 1442 NCS 2013 is a flat-bottom design and the Alumacraft All Weld MV 1546 DD Tunnel 2011 is a modified-V design, so you're likely deciding between two noticeably different on-water experiences. Hull type shapes everything from ride quality and fuel burn to dock handling and resale trajectory.

On paper these two are close siblings in the size department - Alumacraft 1442 NCS 2013 at 14,0 ft versus Alumacraft All Weld MV 1546 DD Tunnel 2011 at 15,0 ft. Weight tells a clearer story for trailering families: the Alumacraft All Weld MV 1546 DD Tunnel 2011 tips the scales at 340 lbs - 110 lbs less than the Alumacraft 1442 NCS 2013 at 230 lbs. That difference is meaningful if you're working within a half-ton or three-quarter-ton truck's tow rating, especially once you factor in a motor, gear, and fuel.

Both boats share a closely matched power ceiling - 25 hp for the Alumacraft 1442 NCS 2013 and 25 hp for the Alumacraft All Weld MV 1546 DD Tunnel 2011. Real-world performance will come down more to which motor is actually bolted on, its load at the time, and whether it's a 4-stroke or 2-stroke setup.

Both boats are rated for 3 passengers - a good fit for a family of four or five plus guests. Comfort at capacity is another matter; the longer hull typically means more seat options and better weight distribution.

At this size, power-to-weight ratio matters more than outright horsepower. The Alumacraft 1442 NCS 2013 comes in at 9 lbs per hp versus 14 lbs per hp for the Alumacraft All Weld MV 1546 DD Tunnel 2011. The lower the ratio the more explosive the acceleration - meaningful on a short RIB where bursts of speed, quick planing, and agility in surf or tight waterways define the experience.

Bottom line: The Alumacraft 1442 NCS 2013 and Alumacraft All Weld MV 1546 DD Tunnel 2011 are closely matched on the specs that matter most. Test-ride both on the water you actually use, check current dealer pricing, and factor in long-term service access before you sign.
General Boat Info
MakeAlumacraft
MakeAlumacraft
Model1442 NCS
ModelAll Weld MV 1546 DD Tunnel
Model Year2013
Model Year2011
Measurements / Dimensions
Beam62 in.
Beam65 in.
Beam - Meters1.57
Beam - Meters1.65
Beam - Inches62
Beam - Inches65
Weight - Detail230 lbs.
Weight - Detail340 lbs.
Weight - kg104.33
Weight - kg154.22
Weight - lbs.230
Weight - lbs.340
Width [transom] - Detail42 in. bottom width
Width [transom] - Detailnot available
Height - Detail20 in.
Height - Detail20 in.
Height - Meters0.51
Height - Meters0.51
Height - Inches20
Height - Inches20
Height [transom]15 in.
Height [transom]15 in.
Length - Feet14
Length - Feet15
Length overall - Detail14 ft.
Length overall - Detail15 ft. 0 in.
Length overall - Meters4.27
Length overall - Meters4.57
Length overall - Inches168
Length overall - Inches180
Body / Hull
Hull materialAluminum
Hull materialAluminum
Hull thickness0.063 in.
Hull thickness0.080 in.
Hull typeFlat
Hull typeModified Vee
Engine and Drivetrain
Fuel typeGas
Fuel typeGas
Drive typeOutboard
Drive typeOutboard
Engine max25 hp
Engine max25 hp
Operational Info
Maximum capacity755 lbs.
Maximum capacity719 lbs.
Maximum people3
Maximum people3

Alumacraft 1442 NCS 2013 vs Alumacraft All Weld MV 1546 DD Tunnel 2011 - Common Questions

Which is the larger boat - the Alumacraft 1442 NCS 2013 or the Alumacraft All Weld MV 1546 DD Tunnel 2011?
The Alumacraft All Weld MV 1546 DD Tunnel 2011 is the longer of the two at 15,0 feet overall. The Alumacraft 1442 NCS 2013 comes in at 14,0 feet, making it roughly 1,0 ft shorter - a meaningful difference in deck room and overall on-water presence.
Which is easier to trailer - the Alumacraft 1442 NCS 2013 or the Alumacraft All Weld MV 1546 DD Tunnel 2011?
For trailering, the Alumacraft 1442 NCS 2013 has the edge at 230 lbs dry weight versus 340 lbs for the Alumacraft All Weld MV 1546 DD Tunnel 2011. Add a motor (typically 300–500 lbs for an outboard in this class), gear, and a partial fuel load and the difference grows. Lighter is friendlier on smaller tow vehicles and on fuel economy while hauling.
How many people can each boat hold?
The Alumacraft 1442 NCS 2013 is Coast Guard rated for 3 passengers, while the Alumacraft All Weld MV 1546 DD Tunnel 2011 is certified for 3. Note that legal capacity and comfortable capacity aren't always the same thing - on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.
Which boat has the better power-to-weight ratio?
The Alumacraft 1442 NCS 2013 has a better power-to-weight ratio at 9 lbs per hp compared to 14 lbs per hp for the Alumacraft All Weld MV 1546 DD Tunnel 2011. A lower number means quicker acceleration and faster time to plane - the number that actually matters most on short, sporty boats like these.
Which boat is wider, and does it affect trailering?
The Alumacraft All Weld MV 1546 DD Tunnel 2011 measures 65" wide, compared to 62" for the Alumacraft 1442 NCS 2013. The US standard-width towing limit is 8’6" (102") in most states - anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.
Are the Alumacraft 1442 NCS 2013 and Alumacraft All Weld MV 1546 DD Tunnel 2011 from the same manufacturer?
Yes - both the Alumacraft 1442 NCS 2013 and the Alumacraft All Weld MV 1546 DD Tunnel 2011 are built by Alumacraft. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.