Alumacraft 1442 NCS 2010 boat specs
Alumacraft
Alumacraft 1442 NCS 2010
2010
View full specs →
VS
Alumacraft MV 1756 AW RR 2005 boat specs
Alumacraft
Alumacraft MV 1756 AW RR 2005
2005
View full specs →

Alumacraft 1442 NCS 2010 vs Alumacraft MV 1756 AW RR 2005: Same Brand, Different Boat

The Alumacraft 1442 NCS 2010 vs Alumacraft MV 1756 AW RR 2005 comparison sits squarely in the category of decisions where specs alone won't tell the whole story: intended use, storage, and long-term ownership costs all factor in.

On paper these two are close siblings in the size department - Alumacraft 1442 NCS 2010 at 14,0 ft versus Alumacraft MV 1756 AW RR 2005 at 17,0 ft. Weight tells a clearer story for trailering families: the Alumacraft MV 1756 AW RR 2005 tips the scales at 600 lbs - 370 lbs less than the Alumacraft 1442 NCS 2010 at 230 lbs. That difference is meaningful if you're working within a half-ton or three-quarter-ton truck's tow rating, especially once you factor in a motor, gear, and fuel.

The Alumacraft MV 1756 AW RR 2005 tops out at 115 hp. Engine specs for the Alumacraft 1442 NCS 2010 aren't listed - confirm with a dealer before selecting an outboard.

For family outings this is probably the sharpest distinction between the two. The Alumacraft MV 1756 AW RR 2005 is rated for 5 passengers, while the Alumacraft 1442 NCS 2010 caps at 4. If you're regularly pulling extended family or a group of friends onto the water, the extra seats on the Alumacraft MV 1756 AW RR 2005 could be the deciding factor.

Bottom line: Choose the Alumacraft MV 1756 AW RR 2005 if your priority is putting more people on the water - it handles 5 passengers and at 17,0 ft it has the deck room to back that rating up comfortably. The Alumacraft 1442 NCS 2010 is the smarter pick if you want a lighter, easier-to-trailer boat rated for 4 that costs less to run day-to-day.
General Boat Info
MakeAlumacraft
MakeAlumacraft
Model1442 NCS
ModelMV 1756 AW RR
Model Year2010
Model Year2005
Measurements / Dimensions
Beam62 in. (1.58 m)
Beam83 in. (2.10 m) Bottom: 56 in. (1.42 m)
Beam - Meters1.57
Beam - Meters2.11
Beam - Inches62
Beam - Inches83
Weight - Detail230 lbs. (104.3 kg)
Weight - Detail600 lbs. (272 kg)
Weight - kg104.33
Weight - kg272.16
Weight - lbs.230
Weight - lbs.600
Width [transom] - Detail42 in. (1.07 m)
Width [transom] - Detail83 in. (2.11 m)
Height - Detail20 in. (.51 m)
Height - Detail24 in. (.60 m)
Height - Meters0.51
Height - Meters0.61
Height - Inches20
Height - Inches24
Height [transom]15 in. (.38 m)
Height [transom]29 in. (.73 m)
Length - Meters4.27
Length - Meters5.18
Length - Feet14
Length - Feet17
Length overall - Detail14 ft. (4.27 m)
Length overall - Detail17 ft. 0 in. (5.18 m)
Length overall - Meters4.27
Length overall - Meters5.18
Length overall - Inches168
Length overall - Inches204
Body / Hull
Hull materialAluminum
Hull materialAluminum
Hull thickness0.063 in. (1.6 mm)
Hull thicknessBottom/sides: .102 in. (2.5 mm)
Hull typeFlat
Hull typenot available
Engine and Drivetrain
Engine/s standard25 hp (19 kW)
Engine/s standardnot available
Fuel typeGas
Fuel typenot available
Drive typeOutboard
Drive typenot available
Fuel tank capacity - Detailnot available
Fuel tank capacity - Detail25 gal. (95 l)
Fuel tank capacity - Litersnot available
Fuel tank capacity - Liters94.64
Fuel tank capacity - Galnot available
Fuel tank capacity - Gal25
Engine maxnot available
Engine max115 hp (85 kw)
Operational Info
Maximum capacity770 lbs. (349 kg)
Maximum capacitynot available
Maximum people4
Maximum people5

Alumacraft 1442 NCS 2010 vs Alumacraft MV 1756 AW RR 2005 - Common Questions

Which is the larger boat - the Alumacraft 1442 NCS 2010 or the Alumacraft MV 1756 AW RR 2005?
The Alumacraft MV 1756 AW RR 2005 is the longer of the two at 17,0 feet overall. The Alumacraft 1442 NCS 2010 comes in at 14,0 feet, making it roughly 3,0 ft shorter - a meaningful difference in deck room and overall on-water presence.
Which is easier to trailer - the Alumacraft 1442 NCS 2010 or the Alumacraft MV 1756 AW RR 2005?
For trailering, the Alumacraft 1442 NCS 2010 has the edge at 230 lbs dry weight versus 600 lbs for the Alumacraft MV 1756 AW RR 2005. Add a motor (typically 300–500 lbs for an outboard in this class), gear, and a partial fuel load and the difference grows. Lighter is friendlier on smaller tow vehicles and on fuel economy while hauling.
What is the maximum horsepower rating for these boats?
The Alumacraft MV 1756 AW RR 2005 has a documented max rating of 115 hp. Engine specifications for the Alumacraft 1442 NCS 2010 were not available in our database - check the OEM spec sheet or manufacturer's website for confirmation.
How many people can each boat hold?
The Alumacraft 1442 NCS 2010 is Coast Guard rated for 4 passengers, while the Alumacraft MV 1756 AW RR 2005 is certified for 5. Note that legal capacity and comfortable capacity aren't always the same thing - on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.
Which boat is wider, and does it affect trailering?
The Alumacraft MV 1756 AW RR 2005 measures 83" wide, compared to 62" for the Alumacraft 1442 NCS 2010. The US standard-width towing limit is 8’6" (102") in most states - anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.
Are the Alumacraft 1442 NCS 2010 and Alumacraft MV 1756 AW RR 2005 from the same manufacturer?
Yes - both the Alumacraft 1442 NCS 2010 and the Alumacraft MV 1756 AW RR 2005 are built by Alumacraft. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.