Alumacraft 1442 NCS 2010 boat specs
Alumacraft
Alumacraft 1442 NCS 2010
2010
View full specs →
VS
Alumacraft MV  1648 2004 boat specs
Alumacraft
Alumacraft MV 1648 2004
2004
View full specs →

Alumacraft 1442 NCS 2010 vs Alumacraft MV 1648 2004: Same Brand, Different Boat

The Alumacraft 1442 NCS 2010 vs Alumacraft MV 1648 2004 comparison sits squarely in the category of decisions where specs alone won't tell the whole story: intended use, storage, and long-term ownership costs all factor in.

For family outings this is probably the sharpest distinction between the two. The Alumacraft MV 1648 2004 is rated for 5 passengers, while the Alumacraft 1442 NCS 2010 caps at 4. If you're regularly pulling extended family or a group of friends onto the water, the extra seats on the Alumacraft MV 1648 2004 could be the deciding factor.

Bottom line: Choose the Alumacraft MV 1648 2004 if your priority is putting more people on the water - it handles 5 passengers and at 0,0 ft it has the deck room to back that rating up comfortably. The Alumacraft 1442 NCS 2010 is the smarter pick if you want a lighter, easier-to-trailer boat rated for 4 that costs less to run day-to-day.
General Boat Info
MakeAlumacraft
MakeAlumacraft
Model1442 NCS
ModelMV 1648
Model Year2010
Model Year2004
Measurements / Dimensions
Beam62 in. (1.58 m)
Beam70 in.
Beam - Meters1.57
Beam - Meters1.78
Beam - Inches62
Beam - Inches70
Weight - Detail230 lbs. (104.3 kg)
Weight - Detail270 lbs.
Weight - kg104.33
Weight - kg122.47
Weight - lbs.230
Weight - lbs.270
Width [transom] - Detail42 in. (1.07 m)
Width [transom] - Detailnot available
Height - Detail20 in. (.51 m)
Height - Detail21 in.
Height - Meters0.51
Height - Meters0.53
Height - Inches20
Height - Inches21
Height [transom]15 in. (.38 m)
Height [transom]15 in.
Length - Meters4.27
Length - Metersnot available
Length - Feet14
Length - Feetnot available
Length overall - Detail14 ft. (4.27 m)
Length overall - Detail16 ft.
Length overall - Meters4.27
Length overall - Meters4.88
Length overall - Inches168
Length overall - Inches192
Draft [drive up] - Detailnot available
Draft [drive up] - DetailN/A
Body / Hull
Hull materialAluminum
Hull materialAluminum
Hull thickness0.063 in. (1.6 mm)
Hull thicknessnot available
Hull typeFlat
Hull typenot available
Engine and Drivetrain
Engine/s standard25 hp (19 kW)
Engine/s standard40 hp
Fuel typeGas
Fuel typenot available
Drive typeOutboard
Drive typenot available
Fuel tank capacity - Detailnot available
Fuel tank capacity - DetailN/A
Operational Info
Maximum capacity770 lbs. (349 kg)
Maximum capacitynot available
Maximum people4
Maximum people5 persons
Water capacitynot available
Water capacityN/A
Trailer Info
Trailer - Detailnot available
Trailer - DetailN/A

Alumacraft 1442 NCS 2010 vs Alumacraft MV 1648 2004 - Common Questions

Which is easier to trailer - the Alumacraft 1442 NCS 2010 or the Alumacraft MV 1648 2004?
For trailering, the Alumacraft 1442 NCS 2010 has the edge at 230 lbs dry weight versus 270 lbs for the Alumacraft MV 1648 2004. Add a motor (typically 300–500 lbs for an outboard in this class), gear, and a partial fuel load and the difference grows. Lighter is friendlier on smaller tow vehicles and on fuel economy while hauling.
How many people can each boat hold?
The Alumacraft 1442 NCS 2010 is Coast Guard rated for 4 passengers, while the Alumacraft MV 1648 2004 is certified for 5. Note that legal capacity and comfortable capacity aren't always the same thing - on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.
Which boat is wider, and does it affect trailering?
The Alumacraft MV 1648 2004 measures 70" wide, compared to 62" for the Alumacraft 1442 NCS 2010. The US standard-width towing limit is 8’6" (102") in most states - anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.
Are the Alumacraft 1442 NCS 2010 and Alumacraft MV 1648 2004 from the same manufacturer?
Yes - both the Alumacraft 1442 NCS 2010 and the Alumacraft MV 1648 2004 are built by Alumacraft. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.