Alumacraft 1442 LW 2013 boat specs
Alumacraft
Alumacraft 1442 LW 2013
2013
View full specs →
VS
Alumacraft T12V 2008 boat specs
Alumacraft
Alumacraft T12V 2008
2008
View full specs →

Alumacraft 1442 LW 2013 vs Alumacraft T12V 2008: Same Brand, Different Boat

The spec sheets list the Alumacraft 1442 LW 2013 as flat and the Alumacraft T12V 2008 as other, so check how each hull rides in the conditions you use before you decide.

On paper these two are close siblings in the size department - Alumacraft 1442 LW 2013 at 14,0 ft versus Alumacraft T12V 2008 at 12,0 ft. At 230 lbs and 189 lbs respectively, both sit in a similar weight class - either should pair comfortably with most mid-size SUVs and half-ton trucks, though always confirm your specific tow rating with the motor added.

Both boats share a closely matched power ceiling - 25 hp for the Alumacraft 1442 LW 2013 and 10 hp for the Alumacraft T12V 2008. Real-world performance will come down more to which motor is actually bolted on, its load at the time, and whether it's a 4-stroke or 2-stroke setup.

Both boats are rated for 3 passengers - a good fit for a family of four or five plus guests. Comfort at capacity is another matter; the longer hull typically means more seat options and better weight distribution.

At this size, power-to-weight ratio matters more than outright horsepower. The Alumacraft 1442 LW 2013 comes in at 9 lbs per hp versus 19 lbs per hp for the Alumacraft T12V 2008. The lower the ratio the more explosive the acceleration - meaningful on a short RIB where bursts of speed, quick planing, and agility in surf or tight waterways define the experience.

Bottom line: The Alumacraft 1442 LW 2013 and Alumacraft T12V 2008 are closely matched on the specs that matter most. Test-ride both on the water you actually use, check current dealer pricing, and factor in long-term service access before you sign.
General Boat Info
MakeAlumacraft
MakeAlumacraft
Model1442 LW
ModelT12V
Model Year2013
Model Year2008
Measurements / Dimensions
Beam62 in.
Beam60 in. (1.52 m)
Beam - Meters1.57
Beam - Meters1.52
Beam - Inches62
Beam - Inches60
Weight - Detail230 lbs.
Weight - Detail189 lbs. (86 kg)
Weight - kg104.33
Weight - kg85.73
Weight - lbs.230
Weight - lbs.189
Width [transom] - Detail42 in. bottom width
Width [transom] - Detail60 in. (1.52 m)
Height - Detail20 in.
Height - Detail25 in. (0.64 m)
Height - Meters0.51
Height - Meters0.64
Height - Inches20
Height - Inches25
Height [transom]15 in.
Height [transom]15 in. (0.38 m)
Length - Feet14
Length - Feet12
Length overall - Detail14 ft.
Length overall - Detail12 ft. 2 in. (3.7 m)
Length overall - Meters4.27
Length overall - Meters3.71
Length overall - Inches168
Length overall - Inches146
Length - Metersnot available
Length - Meters3.7
Length - Inchesnot available
Length - Inches2
Body / Hull
Hull materialAluminum
Hull materialAluminum
Hull thickness0.063 in.
Hull thicknessFull Vee Hull: Bottom-0.060 in. (1.52 mm) Sides-0.050 in. (1.27 mm)
Hull typeFlat
Hull typeOther
Engine and Drivetrain
Fuel typeGas
Fuel typeGas
Drive typeOutboard
Drive typeOutboard
Engine max25 hp
Engine max10 hp (7 kW)
Operational Info
Maximum capacity755 lbs.
Maximum capacity655 lbs. (297 kg)
Maximum people3
Maximum people3

Alumacraft 1442 LW 2013 vs Alumacraft T12V 2008 - Common Questions

Which is the larger boat - the Alumacraft 1442 LW 2013 or the Alumacraft T12V 2008?
The Alumacraft 1442 LW 2013 is the longer of the two at 14,0 feet overall. The Alumacraft T12V 2008 comes in at 12,0 feet, making it roughly 2,0 ft shorter - a meaningful difference in deck room and overall on-water presence.
Which is easier to trailer - the Alumacraft 1442 LW 2013 or the Alumacraft T12V 2008?
For trailering, the Alumacraft T12V 2008 has the edge at 189 lbs dry weight versus 230 lbs for the Alumacraft 1442 LW 2013. Add a motor (typically 300–500 lbs for an outboard in this class), gear, and a partial fuel load and the difference grows. Lighter is friendlier on smaller tow vehicles and on fuel economy while hauling.
Which boat can handle a bigger outboard?
The Alumacraft 1442 LW 2013 is rated to a maximum of 25 hp, giving it the larger power ceiling. The Alumacraft T12V 2008 tops out at 10 hp. Keep in mind that maximum ratings are just that - matching the motor to the actual load and usage pattern usually matters more than chasing the ceiling.
How many people can each boat hold?
The Alumacraft 1442 LW 2013 is Coast Guard rated for 3 passengers, while the Alumacraft T12V 2008 is certified for 3. Note that legal capacity and comfortable capacity aren't always the same thing - on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.
Which boat has the better power-to-weight ratio?
The Alumacraft 1442 LW 2013 has a better power-to-weight ratio at 9 lbs per hp compared to 19 lbs per hp for the Alumacraft T12V 2008. A lower number means quicker acceleration and faster time to plane - the number that actually matters most on short, sporty boats like these.
Which boat is wider, and does it affect trailering?
The Alumacraft 1442 LW 2013 measures 62" wide, compared to 60" for the Alumacraft T12V 2008. The US standard-width towing limit is 8’6" (102") in most states - anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.
Are the Alumacraft 1442 LW 2013 and Alumacraft T12V 2008 from the same manufacturer?
Yes - both the Alumacraft 1442 LW 2013 and the Alumacraft T12V 2008 are built by Alumacraft. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.