Alumacraft 1442 LW 2002 boat specs
Alumacraft
Alumacraft 1442 LW 2002
2002
View full specs →
VS
Alumacraft All Weld MV 1546 DD 2012 boat specs
Alumacraft
Alumacraft All Weld MV 1546 DD 2012
2012
View full specs →

Alumacraft 1442 LW 2002 vs Alumacraft All Weld MV 1546 DD 2012 — Same Brand, Different Boat

The Alumacraft 1442 LW 2002 vs Alumacraft All Weld MV 1546 DD 2012 comparison sits squarely in the category of decisions where specs alone won't tell the whole story — intended use, storage, and long-term ownership costs all factor in.

Both boats share a closely matched power ceiling — 25 hp for the Alumacraft 1442 LW 2002 and 25 hp for the Alumacraft All Weld MV 1546 DD 2012. Real-world performance will come down more to which motor is actually bolted on, its load at the time, and whether it's a 4-stroke or 2-stroke setup.

For family outings this is probably the sharpest distinction between the two. The Alumacraft 1442 LW 2002 is rated for 4 passengers, while the Alumacraft All Weld MV 1546 DD 2012 caps at 3. If you're regularly pulling extended family or a group of friends onto the water, the extra seats on the Alumacraft 1442 LW 2002 could be the deciding factor.

Bottom line: Choose the Alumacraft 1442 LW 2002 if your priority is putting more people on the water — it handles 4 passengers and at 0,0 ft it has the deck room to back that rating up comfortably. The Alumacraft All Weld MV 1546 DD 2012 is the smarter pick if you want a lighter, easier-to-trailer boat rated for 3 that costs less to run day-to-day.
General Boat Info
MakeAlumacraft
MakeAlumacraft
Model1442 LW
ModelAll Weld MV 1546 DD
Model Year2002
Model Year2012
Measurements / Dimensions
Beam62 in
Beam65 in
Beam - Meters1.57
Beam - Meters1.65
Beam - Inches62
Beam - Inches65
Weight - Detail200 lbs
Weight - Detail340 lbs
Weight - kg90.72
Weight - kg154.22
Weight - lbs.2
Weight - lbs.34
Height - Detail20 in
Height - Detail20 in
Height - Meters0.51
Height - Meters0.51
Height - Inches2
Height - Inches2
Height [transom]15 in
Height [transom]15 in
Length overall - Detail14 ft
Length overall - Detail15 ft
Length overall - Meters4.27
Length overall - Meters4.57
Length overall - Inches168
Length overall - Inches18
Length - Feetnot available
Length - Feet15
Body / Hull
Hull materialAluminum
Hull materialAluminum
Hull thicknessnot available
Hull thickness0.080 in
Hull typenot available
Hull typeModified Vee
Engine and Drivetrain
Engine max25 hp w/Tiller Steering
Engine max25 hp
Fuel typenot available
Fuel typeGas
Drive typenot available
Drive typeOutboard
Operational Info
Maximum people4 persons
Maximum people3
Maximum capacitynot available
Maximum capacity719 lbs

Alumacraft 1442 LW 2002 vs Alumacraft All Weld MV 1546 DD 2012 — Common Questions

Which is easier to trailer — the Alumacraft 1442 LW 2002 or the Alumacraft All Weld MV 1546 DD 2012?
For trailering, the Alumacraft 1442 LW 2002 has the edge at 2 lbs dry weight versus 34 lbs for the Alumacraft All Weld MV 1546 DD 2012. Add a motor (typically 300–500 lbs for an outboard in this class), gear, and a partial fuel load and the difference grows. Lighter is friendlier on smaller tow vehicles and on fuel economy while hauling.
How many people can each boat hold?
The Alumacraft 1442 LW 2002 is Coast Guard rated for 4 passengers, while the Alumacraft All Weld MV 1546 DD 2012 is certified for 3. Note that legal capacity and comfortable capacity aren't always the same thing — on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.
Which boat is wider, and does it affect trailering?
The Alumacraft All Weld MV 1546 DD 2012 measures 65" wide, compared to 62" for the Alumacraft 1442 LW 2002. The US standard-width towing limit is 8’6" (102") in most states — anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.
Are the Alumacraft 1442 LW 2002 and Alumacraft All Weld MV 1546 DD 2012 from the same manufacturer?
Yes — both the Alumacraft 1442 LW 2002 and the Alumacraft All Weld MV 1546 DD 2012 are built by Alumacraft. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.