Alumacraft 1436 2013 boat specs
Alumacraft
Alumacraft 1436 2013
2013
View full specs →
VS
Alumacraft MV 1546 AW   2013 boat specs
Alumacraft
Alumacraft MV 1546 AW 2013
2013
View full specs →

Alumacraft 1436 2013 vs Alumacraft MV 1546 AW 2013: Same Brand, Different Boat

The Alumacraft 1436 2013 is a flat-bottom design and the Alumacraft MV 1546 AW 2013 is a modified-V design, so you're likely deciding between two noticeably different on-water experiences. Hull type shapes everything from ride quality and fuel burn to dock handling and resale trajectory.

On paper these two are close siblings in the size department - Alumacraft 1436 2013 at 14,0 ft versus Alumacraft MV 1546 AW 2013 at 15,0 ft. Weight tells a clearer story for trailering families: the Alumacraft MV 1546 AW 2013 tips the scales at 320 lbs - 140 lbs less than the Alumacraft 1436 2013 at 180 lbs. That difference is meaningful if you're working within a half-ton or three-quarter-ton truck's tow rating, especially once you factor in a motor, gear, and fuel.

Both boats share a closely matched power ceiling - 15 hp for the Alumacraft 1436 2013 and 25 hp for the Alumacraft MV 1546 AW 2013. Real-world performance will come down more to which motor is actually bolted on, its load at the time, and whether it's a 4-stroke or 2-stroke setup.

Both boats are rated for 3 passengers - a good fit for a family of four or five plus guests. Comfort at capacity is another matter; the longer hull typically means more seat options and better weight distribution.

At this size, power-to-weight ratio matters more than outright horsepower. The Alumacraft 1436 2013 comes in at 12 lbs per hp versus 13 lbs per hp for the Alumacraft MV 1546 AW 2013. The lower the ratio the more explosive the acceleration - meaningful on a short RIB where bursts of speed, quick planing, and agility in surf or tight waterways define the experience.

Bottom line: The Alumacraft 1436 2013 and Alumacraft MV 1546 AW 2013 are closely matched on the specs that matter most. Test-ride both on the water you actually use, check current dealer pricing, and factor in long-term service access before you sign.
General Boat Info
MakeAlumacraft
MakeAlumacraft
Model1436
ModelMV 1546 AW
Model Year2013
Model Year2013
Measurements / Dimensions
Beam55 in.
Beam65 in.
Beam - Meters1.4
Beam - Meters1.65
Beam - Inches55
Beam - Inches65
Weight - Detail180 lbs.
Weight - Detail320 lbs.
Weight - kg81.65
Weight - kg145.15
Weight - lbs.180
Weight - lbs.320
Width [transom] - Detail36 in. bottom width
Width [transom] - Detailnot available
Height - Detail19 in.
Height - Detail20 in.
Height - Meters0.48
Height - Meters0.51
Height - Inches19
Height - Inches20
Height [transom]15 in.
Height [transom]15 in.
Length - Feet14
Length - Feet15
Length overall - Detail14 ft.
Length overall - Detail15 ft.
Length overall - Meters4.27
Length overall - Meters4.57
Length overall - Inches168
Length overall - Inches180
Body / Hull
Hull materialAluminum
Hull materialAluminum
Hull thickness0.053 in.
Hull thickness0.0802 in.
Hull typeFlat
Hull typeModified Vee
Engine and Drivetrain
Fuel typeGas
Fuel typeGas
Drive typeOutboard
Drive typeOutboard
Engine max15 hp
Engine max25 hp
Operational Info
Maximum capacity620 lbs.
Maximum capacity719 lbs.
Maximum people3
Maximum people3

Alumacraft 1436 2013 vs Alumacraft MV 1546 AW 2013 - Common Questions

Which is the larger boat - the Alumacraft 1436 2013 or the Alumacraft MV 1546 AW 2013?
The Alumacraft MV 1546 AW 2013 is the longer of the two at 15,0 feet overall. The Alumacraft 1436 2013 comes in at 14,0 feet, making it roughly 1,0 ft shorter - a meaningful difference in deck room and overall on-water presence.
Which is easier to trailer - the Alumacraft 1436 2013 or the Alumacraft MV 1546 AW 2013?
For trailering, the Alumacraft 1436 2013 has the edge at 180 lbs dry weight versus 320 lbs for the Alumacraft MV 1546 AW 2013. Add a motor (typically 300–500 lbs for an outboard in this class), gear, and a partial fuel load and the difference grows. Lighter is friendlier on smaller tow vehicles and on fuel economy while hauling.
Which boat can handle a bigger outboard?
The Alumacraft MV 1546 AW 2013 is rated to a maximum of 25 hp, giving it the larger power ceiling. The Alumacraft 1436 2013 tops out at 15 hp. Keep in mind that maximum ratings are just that - matching the motor to the actual load and usage pattern usually matters more than chasing the ceiling.
How many people can each boat hold?
The Alumacraft 1436 2013 is Coast Guard rated for 3 passengers, while the Alumacraft MV 1546 AW 2013 is certified for 3. Note that legal capacity and comfortable capacity aren't always the same thing - on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.
Which boat has the better power-to-weight ratio?
The Alumacraft 1436 2013 has a better power-to-weight ratio at 12 lbs per hp compared to 13 lbs per hp for the Alumacraft MV 1546 AW 2013. A lower number means quicker acceleration and faster time to plane - the number that actually matters most on short, sporty boats like these.
Which boat is wider, and does it affect trailering?
The Alumacraft MV 1546 AW 2013 measures 65" wide, compared to 55" for the Alumacraft 1436 2013. The US standard-width towing limit is 8’6" (102") in most states - anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.
Are the Alumacraft 1436 2013 and Alumacraft MV 1546 AW 2013 from the same manufacturer?
Yes - both the Alumacraft 1436 2013 and the Alumacraft MV 1546 AW 2013 are built by Alumacraft. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.