Alumacraft 1436 Lite 2010 vs Alumacraft Angler Tiller 2010 - Boat Spec Comparison

Q: Which is the larger boat — the Alumacraft 1436 Lite 2010 or the Alumacraft Angler Tiller 2010?

The Alumacraft Angler Tiller 2010 is the longer of the two at 16,0 feet overall. The Alumacraft 1436 Lite 2010 comes in at 14,0 feet, making it roughly 2,0 ft shorter — a meaningful difference in deck room and overall on-water presence.

Q: Which is easier to trailer — the Alumacraft 1436 Lite 2010 or the Alumacraft Angler Tiller 2010?

For trailering, the Alumacraft 1436 Lite 2010 has the edge at 135 lbs dry weight versus 465 lbs for the Alumacraft Angler Tiller 2010. Add a motor (typically 300–500 lbs for an outboard in this class), gear, and a partial fuel load and the difference grows. Lighter is friendlier on smaller tow vehicles and on fuel economy while hauling.

Q: What is the maximum horsepower rating for these boats?

The Alumacraft 1436 Lite 2010 has a documented max rating of 15 hp. Engine specifications for the Alumacraft Angler Tiller 2010 were not available in our database — check the OEM spec sheet or manufacturer's website for confirmation.

Q: How many people can each boat hold?

The Alumacraft 1436 Lite 2010 is Coast Guard rated for 3 passengers, while the Alumacraft Angler Tiller 2010 is certified for 3. Note that legal capacity and comfortable capacity aren't always the same thing — on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.

Q: Which boat is wider, and does it affect trailering?

The Alumacraft Angler Tiller 2010 measures 65" wide, compared to 55" for the Alumacraft 1436 Lite 2010. The US standard-width towing limit is 8’6" (102") in most states — anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.

Q: Are the Alumacraft 1436 Lite 2010 and Alumacraft Angler Tiller 2010 from the same manufacturer?

Yes — both the Alumacraft 1436 Lite 2010 and the Alumacraft Angler Tiller 2010 are built by Alumacraft. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.

Boat Comparison

Alumacraft 1436 Lite 2010 vs Alumacraft Angler Tiller 2010

Alumacraft

Alumacraft 1436 Lite 2010

2010

View full specs →

Alumacraft

Alumacraft Angler Tiller 2010

2010

View full specs →

Detailed Evaluation & Buyer Recommendation

Alumacraft 1436 Lite 2010 vs Alumacraft Angler Tiller 2010 — Same Brand, Different Boat

Matching a flat Alumacraft 1436 Lite 2010 against a modified vee Alumacraft Angler Tiller 2010 means you're likely deciding between two genuinely different on-water experiences. Hull type shapes everything from ride quality and fuel burn to dock handling and resale trajectory.

On paper these two are close siblings in the size department — Alumacraft 1436 Lite 2010 at 14,0 ft versus Alumacraft Angler Tiller 2010 at 16,0 ft. Weight tells a clearer story for trailering families: the Alumacraft Angler Tiller 2010 tips the scales at 465 lbs — 330 lbs less than the Alumacraft 1436 Lite 2010 at 135 lbs. That difference is meaningful if you're working within a half-ton or three-quarter-ton truck's tow rating, especially once you factor in a motor, gear, and fuel.

The Alumacraft 1436 Lite 2010 carries a rated maximum of 15 hp. Engine data for the Alumacraft Angler Tiller 2010 wasn't available in our records — check the manufacturer's spec sheet before sizing a motor.

Both boats are rated for 3 passengers — a good fit for a family of four or five plus guests. Comfort at capacity is another matter; the longer hull typically means more seat options and better weight distribution.

Bottom line: The Alumacraft 1436 Lite 2010 and Alumacraft Angler Tiller 2010 are closely matched on the specs that matter most. Test-ride both on the water you actually use, check current dealer pricing, and factor in long-term service access before you sign.

General Boat Info

MakeAlumacraft

Model1436 Lite

ModelAngler Tiller

Model Year201

Measurements / Dimensions

Beam55 in. (1.4 m)

Beam65 in. (1.65 m) Bottom: 48 in. (1.22 m)

Beam - Meters1.4

Beam - Meters1.65

Beam - Inches55

Beam - Inches65

Weight - Detail135 lbs. (61.23 kg)

Weight - Detail465 lbs. (211 kg)

Weight - kg61.23

Weight - kg210.92

Weight - lbs.135

Weight - lbs.465

Width [transom] - Detail36 in. (.9 m)

Width [transom] - Detail71 in. (1.8 m)

Height - Detail19 in. (.48 m)

Height - Detailnot available

Height - Meters0.48

Height - Metersnot available

Height - Inches19

Height - Inchesnot available

Height [transom]15 in. (.38 m)

Height [transom]20 in. (0.51 m)

Length - Meters4.27

Length - Meters4.8

Length - Feet14

Length - Feet16

Length overall - Detail14 ft. (4.27 m)

Length overall - Detail16 ft. (4.8 m)

Length overall - Meters4.27

Length overall - Meters4.88

Length overall - Inches168

Length overall - Inches192

Depth - Detailnot available

Depth - Detail21 in. (0.53 m)

Depth - Centimetersnot available

Depth - Centimeters53.34

Depth - Inchesnot available

Depth - Inches21

Body / Hull

Hull materialAluminum

Hull thickness0.053 in. (1.35 mm)

Hull thickness0.102 in. (2.6 mm)

Hull typeFlat

Hull typeModified Vee

Engine and Drivetrain

Fuel typeGas

Drive typeOutboard

Engine max15 hp (11 kW)

Engine maxnot available

Engine/s standardnot available

Engine/s standard25 hp (19 kW)

Operational Info

Maximum capacity625 lbs. (284 kg)

Maximum capacity825 lbs. (374 kg)

Maximum people3

Alumacraft 1436 Lite 2010 vs Alumacraft Angler Tiller 2010 — Common Questions

Which is the larger boat — the Alumacraft 1436 Lite 2010 or the Alumacraft Angler Tiller 2010?

The Alumacraft Angler Tiller 2010 is the longer of the two at 16,0 feet overall. The Alumacraft 1436 Lite 2010 comes in at 14,0 feet, making it roughly 2,0 ft shorter — a meaningful difference in deck room and overall on-water presence.

Which is easier to trailer — the Alumacraft 1436 Lite 2010 or the Alumacraft Angler Tiller 2010?

For trailering, the Alumacraft 1436 Lite 2010 has the edge at 135 lbs dry weight versus 465 lbs for the Alumacraft Angler Tiller 2010. Add a motor (typically 300–500 lbs for an outboard in this class), gear, and a partial fuel load and the difference grows. Lighter is friendlier on smaller tow vehicles and on fuel economy while hauling.

What is the maximum horsepower rating for these boats?

The Alumacraft 1436 Lite 2010 has a documented max rating of 15 hp. Engine specifications for the Alumacraft Angler Tiller 2010 were not available in our database — check the OEM spec sheet or manufacturer's website for confirmation.

How many people can each boat hold?

The Alumacraft 1436 Lite 2010 is Coast Guard rated for 3 passengers, while the Alumacraft Angler Tiller 2010 is certified for 3. Note that legal capacity and comfortable capacity aren't always the same thing — on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.

Which boat is wider, and does it affect trailering?

The Alumacraft Angler Tiller 2010 measures 65" wide, compared to 55" for the Alumacraft 1436 Lite 2010. The US standard-width towing limit is 8’6" (102") in most states — anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.

Are the Alumacraft 1436 Lite 2010 and Alumacraft Angler Tiller 2010 from the same manufacturer?

Yes — both the Alumacraft 1436 Lite 2010 and the Alumacraft Angler Tiller 2010 are built by Alumacraft. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.

← Alumacraft 1436 Lite 2010 full specs ← Alumacraft Angler Tiller 2010 full specs