Alumacraft 1436 Lite 2010 boat specs
Alumacraft
Alumacraft 1436 Lite 2010
2010
View full specs →
VS
Alumacraft 1436 LW 2004 boat specs
Alumacraft
Alumacraft 1436 LW 2004
2004
View full specs →

Alumacraft 1436 Lite 2010 vs Alumacraft 1436 LW 2004 — Same Brand, Different Boat

The Alumacraft 1436 Lite 2010 vs Alumacraft 1436 LW 2004 comparison sits squarely in the category of decisions where specs alone won't tell the whole story — intended use, storage, and long-term ownership costs all factor in.

Both boats share a closely matched power ceiling — 15 hp for the Alumacraft 1436 Lite 2010 and 20 hp for the Alumacraft 1436 LW 2004. Real-world performance will come down more to which motor is actually bolted on, its load at the time, and whether it's a 4-stroke or 2-stroke setup.

Both boats are rated for 3 passengers — a good fit for a family of four or five plus guests. Comfort at capacity is another matter; the longer hull typically means more seat options and better weight distribution.

Bottom line: The Alumacraft 1436 Lite 2010 and Alumacraft 1436 LW 2004 are closely matched on the specs that matter most. Test-ride both on the water you actually use, check current dealer pricing, and factor in long-term service access before you sign.
General Boat Info
MakeAlumacraft
MakeAlumacraft
Model1436 Lite
Model1436 LW
Model Year201
Model Year2004
Measurements / Dimensions
Beam55 in. (1.4 m)
Beam55 in
Beam - Meters1.4
Beam - Meters1.4
Beam - Inches55
Beam - Inches55
Weight - Detail135 lbs. (61.23 kg)
Weight - Detail165 lbs
Weight - kg61.23
Weight - kg74.84
Weight - lbs.135
Weight - lbs.165
Width [transom] - Detail36 in. (.9 m)
Width [transom] - Detailnot available
Height - Detail19 in. (.48 m)
Height - Detail19 in
Height - Meters0.48
Height - Meters0.48
Height - Inches19
Height - Inches19
Height [transom]15 in. (.38 m)
Height [transom]15 in
Length - Meters4.27
Length - Metersnot available
Length - Feet14
Length - Feetnot available
Length overall - Detail14 ft. (4.27 m)
Length overall - Detail14 ft
Length overall - Meters4.27
Length overall - Meters4.27
Length overall - Inches168
Length overall - Inches168
Body / Hull
Hull materialAluminum
Hull materialAluminum
Hull thickness0.053 in. (1.35 mm)
Hull thicknessnot available
Hull typeFlat
Hull typenot available
Engine and Drivetrain
Fuel typeGas
Fuel typenot available
Drive typeOutboard
Drive typenot available
Engine max15 hp (11 kW)
Engine max20 hp w/Tiller Steering
Operational Info
Maximum capacity625 lbs. (284 kg)
Maximum capacitynot available
Maximum people3
Maximum people3 persons

Alumacraft 1436 Lite 2010 vs Alumacraft 1436 LW 2004 — Common Questions

Which is easier to trailer — the Alumacraft 1436 Lite 2010 or the Alumacraft 1436 LW 2004?
For trailering, the Alumacraft 1436 Lite 2010 has the edge at 135 lbs dry weight versus 165 lbs for the Alumacraft 1436 LW 2004. Add a motor (typically 300–500 lbs for an outboard in this class), gear, and a partial fuel load and the difference grows. Lighter is friendlier on smaller tow vehicles and on fuel economy while hauling.
How many people can each boat hold?
The Alumacraft 1436 Lite 2010 is Coast Guard rated for 3 passengers, while the Alumacraft 1436 LW 2004 is certified for 3. Note that legal capacity and comfortable capacity aren't always the same thing — on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.
Do these boats require an oversize trailer permit to tow on US highways?
Both the Alumacraft 1436 Lite 2010 and Alumacraft 1436 LW 2004 share an 55 in. (1.4 m) beam — meaning both sit right at the 8’6" threshold that most US states use for standard-width loads. In most states you can tow at that width without a special permit, but regulations vary. Always check the rules for your state and any states you'll be passing through before your first long haul.
Are the Alumacraft 1436 Lite 2010 and Alumacraft 1436 LW 2004 from the same manufacturer?
Yes — both the Alumacraft 1436 Lite 2010 and the Alumacraft 1436 LW 2004 are built by Alumacraft. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.