Alumacraft 1432 2002 boat specs
Alumacraft
Alumacraft 1432 2002
2002
View full specs →
VS
Alumacraft Riveted Jon 1036 2012 boat specs
Alumacraft
Alumacraft Riveted Jon 1036 2012
2012
View full specs →

Alumacraft 1432 2002 vs Alumacraft Riveted Jon 1036 2012 — Same Brand, Different Boat

The Alumacraft 1432 2002 vs Alumacraft Riveted Jon 1036 2012 comparison sits squarely in the category of decisions where specs alone won't tell the whole story — intended use, storage, and long-term ownership costs all factor in.

Both boats share a closely matched power ceiling — 10 hp for the Alumacraft 1432 2002 and 3 hp for the Alumacraft Riveted Jon 1036 2012. Real-world performance will come down more to which motor is actually bolted on, its load at the time, and whether it's a 4-stroke or 2-stroke setup.

Both boats are rated for 3 passengers — a good fit for a family of four or five plus guests. Comfort at capacity is another matter; the longer hull typically means more seat options and better weight distribution.

Bottom line: The Alumacraft 1432 2002 and Alumacraft Riveted Jon 1036 2012 are closely matched on the specs that matter most. Test-ride both on the water you actually use, check current dealer pricing, and factor in long-term service access before you sign.
General Boat Info
MakeAlumacraft
MakeAlumacraft
Model1432
ModelRiveted Jon 1036
Model Year2002
Model Year2012
Measurements / Dimensions
Beam48 in
Beam55 in
Beam - Meters1.22
Beam - Meters1.4
Beam - Inches48
Beam - Inches55
Weight - Detail130 lbs
Weight - Detail105 lbs
Weight - kg58.97
Weight - kg47.63
Weight - lbs.13
Weight - lbs.105
Height - Detail17 in
Height - Detail19 in
Height - Meters0.43
Height - Meters0.48
Height - Inches17
Height - Inches19
Height [transom]15 in
Height [transom]15 in
Length overall - Detail14 ft
Length overall - Detail10 ft
Length overall - Meters4.27
Length overall - Meters3.05
Length overall - Inches168
Length overall - Inches12
Length - Feetnot available
Length - Feet1
Body / Hull
Hull materialAluminum
Hull materialAluminum
Hull thicknessnot available
Hull thickness0.053 in
Hull typenot available
Hull typeFlat
Engine and Drivetrain
Engine max10 hp w/Tiller Steering
Engine max3 hp
Fuel typenot available
Fuel typeGas
Drive typenot available
Drive typeOutboard
Operational Info
Maximum people3 persons
Maximum people3
Maximum capacitynot available
Maximum capacity365 lbs

Alumacraft 1432 2002 vs Alumacraft Riveted Jon 1036 2012 — Common Questions

Which is easier to trailer — the Alumacraft 1432 2002 or the Alumacraft Riveted Jon 1036 2012?
For trailering, the Alumacraft 1432 2002 has the edge at 13 lbs dry weight versus 105 lbs for the Alumacraft Riveted Jon 1036 2012. Add a motor (typically 300–500 lbs for an outboard in this class), gear, and a partial fuel load and the difference grows. Lighter is friendlier on smaller tow vehicles and on fuel economy while hauling.
Which boat can handle a bigger outboard?
The Alumacraft 1432 2002 is rated to a maximum of 10 hp, giving it the larger power ceiling. The Alumacraft Riveted Jon 1036 2012 tops out at 3 hp. Keep in mind that maximum ratings are just that — matching the motor to the actual load and usage pattern usually matters more than chasing the ceiling.
How many people can each boat hold?
The Alumacraft 1432 2002 is Coast Guard rated for 3 passengers, while the Alumacraft Riveted Jon 1036 2012 is certified for 3. Note that legal capacity and comfortable capacity aren't always the same thing — on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.
Which boat is wider, and does it affect trailering?
The Alumacraft Riveted Jon 1036 2012 measures 55" wide, compared to 48" for the Alumacraft 1432 2002. The US standard-width towing limit is 8’6" (102") in most states — anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.
Are the Alumacraft 1432 2002 and Alumacraft Riveted Jon 1036 2012 from the same manufacturer?
Yes — both the Alumacraft 1432 2002 and the Alumacraft Riveted Jon 1036 2012 are built by Alumacraft. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.