Alumacraft 1036 2010 vs Alumacraft V16 2003 - Boat Spec Comparison

Q: Which is easier to trailer — the Alumacraft 1036 2010 or the Alumacraft V16 2003?

For trailering, the Alumacraft 1036 2010 has the edge at 95 lbs dry weight versus 287 lbs for the Alumacraft V16 2003. Add a motor (typically 300–500 lbs for an outboard in this class), gear, and a partial fuel load and the difference grows. Lighter is friendlier on smaller tow vehicles and on fuel economy while hauling.

Q: Which boat can handle a bigger outboard?

The Alumacraft V16 2003 is rated to a maximum of 40 hp, giving it the larger power ceiling. The Alumacraft 1036 2010 tops out at 3 hp. Keep in mind that maximum ratings are just that — matching the motor to the actual load and usage pattern usually matters more than chasing the ceiling.

Q: How many people can each boat hold?

The Alumacraft 1036 2010 is Coast Guard rated for 2 passengers, while the Alumacraft V16 2003 is certified for 5. Note that legal capacity and comfortable capacity aren't always the same thing — on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.

Q: Which boat is wider, and does it affect trailering?

The Alumacraft 1036 2010 measures 55" wide, compared to 7" for the Alumacraft V16 2003. The US standard-width towing limit is 8’6" (102") in most states — anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.

Q: Are the Alumacraft 1036 2010 and Alumacraft V16 2003 from the same manufacturer?

Yes — both the Alumacraft 1036 2010 and the Alumacraft V16 2003 are built by Alumacraft. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.

Boat Comparison

Alumacraft 1036 2010 vs Alumacraft V16 2003

Alumacraft

Alumacraft 1036 2010

2010

View full specs →

Alumacraft

Alumacraft V16 2003

2003

View full specs →

Detailed Evaluation & Buyer Recommendation

Alumacraft 1036 2010 vs Alumacraft V16 2003 — Same Brand, Different Boat

The Alumacraft 1036 2010 vs Alumacraft V16 2003 comparison sits squarely in the category of decisions where specs alone won't tell the whole story — intended use, storage, and long-term ownership costs all factor in.

The power gap is worth calling out. Rated to 40 hp, the Alumacraft V16 2003 has a 37-hp advantage over the Alumacraft 1036 2010's 3-hp ceiling — enough to notice on acceleration and at cruising speed, particularly with a full passenger load.

For family outings this is probably the sharpest distinction between the two. The Alumacraft V16 2003 is rated for 5 passengers, while the Alumacraft 1036 2010 caps at 2. If you're regularly pulling extended family or a group of friends onto the water, the extra seats on the Alumacraft V16 2003 could be the deciding factor.

Bottom line: Choose the Alumacraft V16 2003 if your priority is putting more people on the water — it handles 5 passengers and at 0,0 ft it has the deck room to back that rating up comfortably. The Alumacraft 1036 2010 is the smarter pick if you want a lighter, easier-to-trailer boat rated for 2 that costs less to run day-to-day.

General Boat Info

MakeAlumacraft

Model1036

ModelV16

Model Year201

Model Year2003

Measurements / Dimensions

Beam55 in. (1.40 m)

Beam70 in

Beam - Meters1.4

Beam - Meters1.78

Beam - Inches55

Beam - Inches7

Weight - Detail95 lbs. (43 kg)

Weight - Detail287 lbs

Weight - kg43.09

Weight - kg130.18

Weight - lbs.95

Weight - lbs.287

Width [transom] - Detail36 in. (.91 m)

Width [transom] - Detailnot available

Height - Detail19 in. (.48 m)

Height - Detail30 in

Height - Meters0.48

Height - Meters0.76

Height - Inches19

Height - Inches3

Height [transom]15 in. (.38 m)

Height [transom]15/20 in. 25 in. available on special orders

Length - Meters3.05

Length - Metersnot available

Length - Feet1

Length - Feetnot available

Length overall - Detail10 ft. (3.05 m)

Length overall - Detail16 ft. 7 in

Length overall - Meters3.05

Length overall - Meters5.05

Length overall - Inches12

Length overall - Inches199

Draft [drive up] - Detailnot available

Draft [drive up] - DetailN/A

Body / Hull

Hull materialAluminum

Hull thickness0.053 in. (1.35 mm)

Hull thicknessnot available

Hull typeFlat

Hull typenot available

Engine and Drivetrain

Fuel typeGas

Fuel typenot available

Drive typeOutboard

Drive typenot available

Horsepower3 hp (2.24 kW)

Horsepowernot available

Fuel tank capacity - Detailnot available

Fuel tank capacity - DetailN/A

Engine maxnot available

Engine max40 HP

Operational Info

Maximum capacity365 lbs. (166 kg)

Maximum capacitynot available

Maximum people2

Maximum people5 persons

Water capacitynot available

Water capacityN/A

Trailer Info

Trailer - Detailnot available

Trailer - DetailN/A

Alumacraft 1036 2010 vs Alumacraft V16 2003 — Common Questions

Which is easier to trailer — the Alumacraft 1036 2010 or the Alumacraft V16 2003?

For trailering, the Alumacraft 1036 2010 has the edge at 95 lbs dry weight versus 287 lbs for the Alumacraft V16 2003. Add a motor (typically 300–500 lbs for an outboard in this class), gear, and a partial fuel load and the difference grows. Lighter is friendlier on smaller tow vehicles and on fuel economy while hauling.

Which boat can handle a bigger outboard?

The Alumacraft V16 2003 is rated to a maximum of 40 hp, giving it the larger power ceiling. The Alumacraft 1036 2010 tops out at 3 hp. Keep in mind that maximum ratings are just that — matching the motor to the actual load and usage pattern usually matters more than chasing the ceiling.

How many people can each boat hold?

The Alumacraft 1036 2010 is Coast Guard rated for 2 passengers, while the Alumacraft V16 2003 is certified for 5. Note that legal capacity and comfortable capacity aren't always the same thing — on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.

Which boat is wider, and does it affect trailering?

The Alumacraft 1036 2010 measures 55" wide, compared to 7" for the Alumacraft V16 2003. The US standard-width towing limit is 8’6" (102") in most states — anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.

Are the Alumacraft 1036 2010 and Alumacraft V16 2003 from the same manufacturer?

Yes — both the Alumacraft 1036 2010 and the Alumacraft V16 2003 are built by Alumacraft. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.

← Alumacraft 1036 2010 full specs ← Alumacraft V16 2003 full specs