Alumacraft 1032 2008 boat specs
Alumacraft
Alumacraft 1032 2008
2008
View full specs →
VS
Alumacraft Riveted Jon 1648 NCS 2011 boat specs
Alumacraft
Alumacraft Riveted Jon 1648 NCS 2011
2011
View full specs →

Alumacraft 1032 2008 vs Alumacraft Riveted Jon 1648 NCS 2011: Which Flat-Bottom Boat Fits Your Needs?

Both the Alumacraft 1032 2008 and the Alumacraft Riveted Jon 1648 NCS 2011 are flat-bottom designs, both built in aluminium, so the buying decision usually comes down to a handful of practical questions: how many people are you putting on the water, how far do you trailer, and what does your tow vehicle weigh?

Size is the most obvious dividing line here. The Alumacraft Riveted Jon 1648 NCS 2011 measures 16,0 feet overall (2011), giving it roughly 6,0 additional feet of deck space compared to the Alumacraft 1032 2008 at 10,0 feet (2008). Weight tells a clearer story for trailering families: the Alumacraft Riveted Jon 1648 NCS 2011 tips the scales at 260 lbs - 165 lbs less than the Alumacraft 1032 2008 at 95 lbs. That difference is meaningful if you're working within a half-ton or three-quarter-ton truck's tow rating, especially once you factor in a motor, gear, and fuel.

The power gap is worth calling out. Rated to 30 hp, the Alumacraft Riveted Jon 1648 NCS 2011 has a 27-hp advantage over the Alumacraft 1032 2008's 3-hp ceiling - enough to notice on acceleration and at cruising speed, particularly with a full passenger load.

For family outings this is probably the sharpest distinction between the two. The Alumacraft Riveted Jon 1648 NCS 2011 is rated for 5 passengers, while the Alumacraft 1032 2008 caps at 2. If you're regularly pulling extended family or a group of friends onto the water, the extra seats on the Alumacraft Riveted Jon 1648 NCS 2011 could be the deciding factor.

At this size, power-to-weight ratio matters more than outright horsepower. The Alumacraft Riveted Jon 1648 NCS 2011 comes in at 9 lbs per hp versus 32 lbs per hp for the Alumacraft 1032 2008. The lower the ratio the more explosive the acceleration - meaningful on a short RIB where bursts of speed, quick planing, and agility in surf or tight waterways define the experience.

Bottom line: Choose the Alumacraft Riveted Jon 1648 NCS 2011 if your priority is putting more people on the water - it handles 5 passengers and at 16,0 ft it has the deck room to back that rating up comfortably. The Alumacraft 1032 2008 is the smarter pick if you want a lighter, easier-to-trailer boat rated for 2 that costs less to run day-to-day.
General Boat Info
MakeAlumacraft
MakeAlumacraft
Model1032
ModelRiveted Jon 1648 NCS
Model Year2008
Model Year2011
Measurements / Dimensions
Beam48 in.
Beam70 in.
Beam - Meters1.22
Beam - Meters1.78
Beam - Inches48
Beam - Inches70
Weight - Detail95 lbs.
Weight - Detail260 lbs.
Weight - kg43.09
Weight - kg117.93
Weight - lbs.95
Weight - lbs.260
Width [transom] - Detail32 in.
Width [transom] - Detailnot available
Height - Detail17 in.
Height - Detail21 in.
Height - Meters0.43
Height - Meters0.53
Height - Inches17
Height - Inches21
Height [transom]15 in.
Height [transom]15 / 20 in.
Length - Feet10
Length - Feet16
Length overall - Detail10 ft.
Length overall - Detail16 ft. 0 in.
Length overall - Meters3.05
Length overall - Meters4.88
Length overall - Inches120
Length overall - Inches192
Body / Hull
Hull materialAluminum
Hull materialAluminum
Hull thickness0.053 in.
Hull thickness0.070 in.
Hull typeFlat
Hull typeFlat
Engine and Drivetrain
Fuel typeGas
Fuel typeGas
Drive typeOutboard
Drive typeOutboard
Engine max3 hp
Engine max30 hp
Operational Info
Maximum capacity365 lbs.
Maximum capacity1,010 lbs.
Maximum people2
Maximum people5

Alumacraft 1032 2008 vs Alumacraft Riveted Jon 1648 NCS 2011 - Common Questions

Which is the larger boat - the Alumacraft 1032 2008 or the Alumacraft Riveted Jon 1648 NCS 2011?
The Alumacraft Riveted Jon 1648 NCS 2011 is the longer of the two at 16,0 feet overall. The Alumacraft 1032 2008 comes in at 10,0 feet, making it roughly 6,0 ft shorter - a meaningful difference in deck room and overall on-water presence.
Which is easier to trailer - the Alumacraft 1032 2008 or the Alumacraft Riveted Jon 1648 NCS 2011?
For trailering, the Alumacraft 1032 2008 has the edge at 95 lbs dry weight versus 260 lbs for the Alumacraft Riveted Jon 1648 NCS 2011. Add a motor (typically 300–500 lbs for an outboard in this class), gear, and a partial fuel load and the difference grows. Lighter is friendlier on smaller tow vehicles and on fuel economy while hauling.
Which boat can handle a bigger outboard?
The Alumacraft Riveted Jon 1648 NCS 2011 is rated to a maximum of 30 hp, giving it the larger power ceiling. The Alumacraft 1032 2008 tops out at 3 hp. Keep in mind that maximum ratings are just that - matching the motor to the actual load and usage pattern usually matters more than chasing the ceiling.
How many people can each boat hold?
The Alumacraft 1032 2008 is Coast Guard rated for 2 passengers, while the Alumacraft Riveted Jon 1648 NCS 2011 is certified for 5. Note that legal capacity and comfortable capacity aren't always the same thing - on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.
Which boat has the better power-to-weight ratio?
The Alumacraft Riveted Jon 1648 NCS 2011 has a better power-to-weight ratio at 9 lbs per hp compared to 32 lbs per hp for the Alumacraft 1032 2008. A lower number means quicker acceleration and faster time to plane - the number that actually matters most on short, sporty boats like these.
Which boat is wider, and does it affect trailering?
The Alumacraft Riveted Jon 1648 NCS 2011 measures 70" wide, compared to 48" for the Alumacraft 1032 2008. The US standard-width towing limit is 8’6" (102") in most states - anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.
Are the Alumacraft 1032 2008 and Alumacraft Riveted Jon 1648 NCS 2011 from the same manufacturer?
Yes - both the Alumacraft 1032 2008 and the Alumacraft Riveted Jon 1648 NCS 2011 are built by Alumacraft. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.