Alumacraft 1032 2004 boat specs
Alumacraft
Alumacraft 1032 2004
2004
View full specs →
VS
Alumacraft MV 1756 AW 2010 boat specs
Alumacraft
Alumacraft MV 1756 AW 2010
2010
View full specs →

Alumacraft 1032 2004 vs Alumacraft MV 1756 AW 2010 — Same Brand, Different Boat

The Alumacraft 1032 2004 vs Alumacraft MV 1756 AW 2010 comparison sits squarely in the category of decisions where specs alone won't tell the whole story — intended use, storage, and long-term ownership costs all factor in.

The power gap is worth calling out. Rated to 50 hp, the Alumacraft MV 1756 AW 2010 has a 47-hp advantage over the Alumacraft 1032 2004's 3-hp ceiling — enough to notice on acceleration and at cruising speed, particularly with a full passenger load.

For family outings this is probably the sharpest distinction between the two. The Alumacraft MV 1756 AW 2010 is rated for 5 passengers, while the Alumacraft 1032 2004 caps at 2. If you're regularly pulling extended family or a group of friends onto the water, the extra seats on the Alumacraft MV 1756 AW 2010 could be the deciding factor.

Bottom line: Choose the Alumacraft MV 1756 AW 2010 if your priority is putting more people on the water — it handles 5 passengers and at 17,0 ft it has the deck room to back that rating up comfortably. The Alumacraft 1032 2004 is the smarter pick if you want a lighter, easier-to-trailer boat rated for 2 that costs less to run day-to-day.
General Boat Info
MakeAlumacraft
MakeAlumacraft
Model1032
ModelMV 1756 AW
Model Year2004
Model Year201
Measurements / Dimensions
Beam48 in
Beam83 in. (2.11 m)
Beam - Meters1.22
Beam - Meters2.11
Beam - Inches48
Beam - Inches83
Weight - Detail100 lbs
Weight - Detail600 lbs. (272 kg)
Weight - kg45.36
Weight - kg272.16
Weight - lbs.1
Weight - lbs.6
Height - Detail17 in
Height - Detail24 in. (.61 m)
Height - Meters0.43
Height - Meters0.61
Height - Inches17
Height - Inches24
Height [transom]15 in
Height [transom]21 in. (.53 m)
Length overall - Detail10 ft
Length overall - Detail17 ft. (5.2 m)
Length overall - Meters3.05
Length overall - Meters5.18
Length overall - Inches12
Length overall - Inches204
Width [transom] - Detailnot available
Width [transom] - Detail56 in. (1.42 m)
Length - Metersnot available
Length - Meters5.2
Length - Feetnot available
Length - Feet17
Body / Hull
Hull materialAluminum
Hull materialAluminum
Hull thicknessnot available
Hull thickness0.102 in. (2.6 mm)
Hull typenot available
Hull typeModified Vee
Engine and Drivetrain
Engine max3 hp w/Tiller Steering
Engine max50 hp (37 kW)
Fuel typenot available
Fuel typeGas
Drive typenot available
Drive typeOutboard
Operational Info
Maximum people2 persons
Maximum people5
Maximum capacitynot available
Maximum capacity1,300 lbs. (589.7 kg)

Alumacraft 1032 2004 vs Alumacraft MV 1756 AW 2010 — Common Questions

Which is easier to trailer — the Alumacraft 1032 2004 or the Alumacraft MV 1756 AW 2010?
For trailering, the Alumacraft 1032 2004 has the edge at 1 lbs dry weight versus 6 lbs for the Alumacraft MV 1756 AW 2010. Add a motor (typically 300–500 lbs for an outboard in this class), gear, and a partial fuel load and the difference grows. Lighter is friendlier on smaller tow vehicles and on fuel economy while hauling.
Which boat can handle a bigger outboard?
The Alumacraft MV 1756 AW 2010 is rated to a maximum of 50 hp, giving it the larger power ceiling. The Alumacraft 1032 2004 tops out at 3 hp. Keep in mind that maximum ratings are just that — matching the motor to the actual load and usage pattern usually matters more than chasing the ceiling.
How many people can each boat hold?
The Alumacraft 1032 2004 is Coast Guard rated for 2 passengers, while the Alumacraft MV 1756 AW 2010 is certified for 5. Note that legal capacity and comfortable capacity aren't always the same thing — on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.
Which boat is wider, and does it affect trailering?
The Alumacraft MV 1756 AW 2010 measures 83" wide, compared to 48" for the Alumacraft 1032 2004. The US standard-width towing limit is 8’6" (102") in most states — anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.
Are the Alumacraft 1032 2004 and Alumacraft MV 1756 AW 2010 from the same manufacturer?
Yes — both the Alumacraft 1032 2004 and the Alumacraft MV 1756 AW 2010 are built by Alumacraft. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.