Alumacraft 1032 2002 boat specs
Alumacraft
Alumacraft 1032 2002
2002
View full specs →
VS
Alumacraft Tournament Pro 175 Tiller 2002 boat specs
Alumacraft
Alumacraft Tournament Pro 175 Tiller 2002
2002
View full specs →

Alumacraft 1032 2002 vs Alumacraft Tournament Pro 175 Tiller 2002 — Same Brand, Different Boat

The Alumacraft 1032 2002 vs Alumacraft Tournament Pro 175 Tiller 2002 comparison sits squarely in the category of decisions where specs alone won't tell the whole story — intended use, storage, and long-term ownership costs all factor in.

The power gap is worth calling out. Rated to 90 hp, the Alumacraft Tournament Pro 175 Tiller 2002 has a 87-hp advantage over the Alumacraft 1032 2002's 3-hp ceiling — enough to notice on acceleration and at cruising speed, particularly with a full passenger load.

For family outings this is probably the sharpest distinction between the two. The Alumacraft Tournament Pro 175 Tiller 2002 is rated for 5 passengers, while the Alumacraft 1032 2002 caps at 2. If you're regularly pulling extended family or a group of friends onto the water, the extra seats on the Alumacraft Tournament Pro 175 Tiller 2002 could be the deciding factor.

Bottom line: Choose the Alumacraft Tournament Pro 175 Tiller 2002 if your priority is putting more people on the water — it handles 5 passengers and at 0,0 ft it has the deck room to back that rating up comfortably. The Alumacraft 1032 2002 is the smarter pick if you want a lighter, easier-to-trailer boat rated for 2 that costs less to run day-to-day.
General Boat Info
MakeAlumacraft
MakeAlumacraft
Model1032
ModelTournament Pro 175 Tiller
Model Year2002
Model Year2002
Measurements / Dimensions
Beam48 in
Beam96 in
Beam - Meters1.22
Beam - Meters2.44
Beam - Inches48
Beam - Inches96
Weight - Detail100 lbs
Weight - Detailnot available
Weight - kg45.36
Weight - kgnot available
Weight - lbs.1
Weight - lbs.not available
Height - Detail17 in
Height - Detail43 in
Height - Meters0.43
Height - Meters1.09
Height - Inches17
Height - Inches43
Height [transom]15 in
Height [transom]20 in
Length overall - Detail10 ft
Length overall - Detail17 ft. 11 in
Length overall - Meters3.05
Length overall - Meters5.46
Length overall - Inches12
Length overall - Inches215
Body / Hull
Hull materialAluminum
Hull materialAluminum
Engine and Drivetrain
Engine max3 hp w/Tiller Steering
Engine max90 hp
Fuel tank capacity - Detailnot available
Fuel tank capacity - Detail34 gal. w/built-in reserve
Fuel tank capacity - Litersnot available
Fuel tank capacity - Liters128.7
Fuel tank capacity - Galnot available
Fuel tank capacity - Gal34
Operational Info
Maximum people2 persons
Maximum people5 persons
Maximum capacitynot available
Maximum capacity1385 lbs

Alumacraft 1032 2002 vs Alumacraft Tournament Pro 175 Tiller 2002 — Common Questions

Which boat can handle a bigger outboard?
The Alumacraft Tournament Pro 175 Tiller 2002 is rated to a maximum of 90 hp, giving it the larger power ceiling. The Alumacraft 1032 2002 tops out at 3 hp. Keep in mind that maximum ratings are just that — matching the motor to the actual load and usage pattern usually matters more than chasing the ceiling.
How many people can each boat hold?
The Alumacraft 1032 2002 is Coast Guard rated for 2 passengers, while the Alumacraft Tournament Pro 175 Tiller 2002 is certified for 5. Note that legal capacity and comfortable capacity aren't always the same thing — on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.
Which boat is wider, and does it affect trailering?
The Alumacraft Tournament Pro 175 Tiller 2002 measures 96" wide, compared to 48" for the Alumacraft 1032 2002. The US standard-width towing limit is 8’6" (102") in most states — anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.
Are the Alumacraft 1032 2002 and Alumacraft Tournament Pro 175 Tiller 2002 from the same manufacturer?
Yes — both the Alumacraft 1032 2002 and the Alumacraft Tournament Pro 175 Tiller 2002 are built by Alumacraft. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.