Alumacraft 1032 2002 boat specs
Alumacraft
Alumacraft 1032 2002
2002
View full specs →
VS
Alumacraft PF170 2006 boat specs
Alumacraft
Alumacraft PF170 2006
2006
View full specs →

Alumacraft 1032 2002 vs Alumacraft PF170 2006 — Same Brand, Different Boat

The Alumacraft 1032 2002 vs Alumacraft PF170 2006 comparison sits squarely in the category of decisions where specs alone won't tell the whole story — intended use, storage, and long-term ownership costs all factor in.

The power gap is worth calling out. Rated to 60 hp, the Alumacraft PF170 2006 has a 57-hp advantage over the Alumacraft 1032 2002's 3-hp ceiling — enough to notice on acceleration and at cruising speed, particularly with a full passenger load.

For family outings this is probably the sharpest distinction between the two. The Alumacraft PF170 2006 is rated for 4 passengers, while the Alumacraft 1032 2002 caps at 2. If you're regularly pulling extended family or a group of friends onto the water, the extra seats on the Alumacraft PF170 2006 could be the deciding factor.

Bottom line: Choose the Alumacraft PF170 2006 if your priority is putting more people on the water — it handles 4 passengers and at 17,0 ft it has the deck room to back that rating up comfortably. The Alumacraft 1032 2002 is the smarter pick if you want a lighter, easier-to-trailer boat rated for 2 that costs less to run day-to-day.
General Boat Info
MakeAlumacraft
MakeAlumacraft
Model1032
ModelPF17
Model Year2002
Model Year2006
Measurements / Dimensions
Beam48 in
Beam74 in. (1.88 m) Bottom: 52 in. (1.32 m)
Beam - Meters1.22
Beam - Meters1.88
Beam - Inches48
Beam - Inches74
Weight - Detail100 lbs
Weight - Detail800 lbs. (363 kg)
Weight - kg45.36
Weight - kg362.87
Weight - lbs.1
Weight - lbs.8
Height - Detail17 in
Height - Detail22 in. (.56 m)
Height - Meters0.43
Height - Meters0.56
Height - Inches17
Height - Inches22
Height [transom]15 in
Height [transom]22 in. (.56 m)
Length overall - Detail10 ft
Length overall - Detail17 ft. 0 in. (5.18 m)
Length overall - Meters3.05
Length overall - Meters5.18
Length overall - Inches12
Length overall - Inches204
Width [transom] - Detailnot available
Width [transom] - Detail74 in. (1.88 m)
Length - Metersnot available
Length - Meters5.18
Length - Feetnot available
Length - Feet17
Body / Hull
Hull materialAluminum
Hull materialAluminum
Hull thicknessnot available
Hull thicknessBottom/sides: .102 in. (2.5 mm)
Hull typenot available
Hull typeModified Vee
Engine and Drivetrain
Engine max3 hp w/Tiller Steering
Engine max60 hp (45 kw)
Fuel typenot available
Fuel typeGas
Drive typenot available
Drive typeOutboard
Operational Info
Maximum people2 persons
Maximum people4
Maximum capacitynot available
Maximum capacity900 lbs. (408 kg)

Alumacraft 1032 2002 vs Alumacraft PF170 2006 — Common Questions

Which is easier to trailer — the Alumacraft 1032 2002 or the Alumacraft PF170 2006?
For trailering, the Alumacraft 1032 2002 has the edge at 1 lbs dry weight versus 8 lbs for the Alumacraft PF170 2006. Add a motor (typically 300–500 lbs for an outboard in this class), gear, and a partial fuel load and the difference grows. Lighter is friendlier on smaller tow vehicles and on fuel economy while hauling.
Which boat can handle a bigger outboard?
The Alumacraft PF170 2006 is rated to a maximum of 60 hp, giving it the larger power ceiling. The Alumacraft 1032 2002 tops out at 3 hp. Keep in mind that maximum ratings are just that — matching the motor to the actual load and usage pattern usually matters more than chasing the ceiling.
How many people can each boat hold?
The Alumacraft 1032 2002 is Coast Guard rated for 2 passengers, while the Alumacraft PF170 2006 is certified for 4. Note that legal capacity and comfortable capacity aren't always the same thing — on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.
Which boat is wider, and does it affect trailering?
The Alumacraft PF170 2006 measures 74" wide, compared to 48" for the Alumacraft 1032 2002. The US standard-width towing limit is 8’6" (102") in most states — anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.
Are the Alumacraft 1032 2002 and Alumacraft PF170 2006 from the same manufacturer?
Yes — both the Alumacraft 1032 2002 and the Alumacraft PF170 2006 are built by Alumacraft. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.