The Albin Marine Scampi 30 1979 vs Albin Marine Singoalla 1970 comparison sits squarely in the category of decisions where specs alone won't tell the whole story — intended use, storage, and long-term ownership costs all factor in.

Size is the most obvious dividing line here. The Albin Marine Singoalla 1970 measures 33,9 feet overall (1970), giving it roughly 4,1 additional feet of deck space compared to the Albin Marine Scampi 30 1979 at 29,8 feet (1979). Weight tells a clearer story for trailering families: the Albin Marine Singoalla 1970 tips the scales at 8 820 lbs — 1 545 lbs less than the Albin Marine Scampi 30 1979 at 7 275 lbs. That difference is meaningful if you're working within a half-ton or three-quarter-ton truck's tow rating, especially once you factor in a motor, gear, and fuel.

Both boats share a closely matched power ceiling — 12 hp for the Albin Marine Scampi 30 1979 and 22 hp for the Albin Marine Singoalla 1970. Real-world performance will come down more to which motor is actually bolted on, its load at the time, and whether it's a 4-stroke or 2-stroke setup.

For family outings this is probably the sharpest distinction between the two. The Albin Marine Singoalla 1970 is rated for 10 passengers, while the Albin Marine Scampi 30 1979 caps at 9. If you're regularly pulling extended family or a group of friends onto the water, the extra seats on the Albin Marine Singoalla 1970 could be the deciding factor.

Both boats sit in a similar displacement bracket — 7 275 lbs for the Albin Marine Scampi 30 1979 and 8 820 lbs for the Albin Marine Singoalla 1970. Comparable displacement means broadly similar seakeeping behaviour and load capacity, though hull form and ballast ratio will still produce noticeably different sailing characteristics.

Both boats draw a similar depth — 5,4 ft and 5,2 ft respectively. Marina access and anchorage options should be broadly equivalent between the two.

The Albin Marine Scampi 30 1979 uses Sloop rigging. Helm style differs too: the Albin Marine Scampi 30 1979 uses a 1 tiller versus a 1 wheel on the Albin Marine Singoalla 1970. Wheel helms give better leverage and visibility on larger boats; tillers offer direct feedback and simplicity on smaller ones. For auxiliary power the Albin Marine Singoalla 1970 carries a 22-hp engine against 12 hp on the Albin Marine Scampi 30 1979. Motoring range and ability to punch through a foul current or enter a tight marina under power will favour the more powerful installation.

Hull speed is rated at 7,0 knots for the Albin Marine Singoalla 1970 and 6,4 knots for the Albin Marine Scampi 30 1979.