Albin Marine 82 MS 1975 boat specs
Albin Marine
Albin Marine 82 MS 1975
1975
View full specs →
VS
Albin Marine Shipman 28 1969 boat specs
Albin Marine
Albin Marine Shipman 28 1969
1969
View full specs →

Albin Marine 82 MS 1975 vs Albin Marine Shipman 28 1969 — Same Brand, Different Boat

The Albin Marine 82 MS 1975 vs Albin Marine Shipman 28 1969 comparison sits squarely in the category of decisions where specs alone won't tell the whole story — intended use, storage, and long-term ownership costs all factor in.

On paper these two are close siblings in the size department — Albin Marine 82 MS 1975 at 29,9 ft versus Albin Marine Shipman 28 1969 at 28,1 ft. Weight tells a clearer story for trailering families: the Albin Marine 82 MS 1975 tips the scales at 7 496 lbs — 1 323 lbs more than the Albin Marine Shipman 28 1969 at 6 173 lbs. That difference is meaningful if you're working within a half-ton or three-quarter-ton truck's tow rating, especially once you factor in a motor, gear, and fuel.

The power gap is worth calling out. Rated to 35 hp, the Albin Marine 82 MS 1975 has a 23-hp advantage over the Albin Marine Shipman 28 1969's 12-hp ceiling — enough to notice on acceleration and at cruising speed, particularly with a full passenger load.

For family outings this is probably the sharpest distinction between the two. The Albin Marine 82 MS 1975 is rated for 9 passengers, while the Albin Marine Shipman 28 1969 caps at 8. If you're regularly pulling extended family or a group of friends onto the water, the extra seats on the Albin Marine 82 MS 1975 could be the deciding factor.

Both boats sit in a similar displacement bracket — 7 496 lbs for the Albin Marine 82 MS 1975 and 6 173 lbs for the Albin Marine Shipman 28 1969. Comparable displacement means broadly similar seakeeping behaviour and load capacity, though hull form and ballast ratio will still produce noticeably different sailing characteristics.

The Albin Marine 82 MS 1975 uses Sloop rigging. Helm style differs too: the Albin Marine 82 MS 1975 uses a 1 wheel versus a 1 tiller on the Albin Marine Shipman 28 1969. Wheel helms give better leverage and visibility on larger boats; tillers offer direct feedback and simplicity on smaller ones. For auxiliary power the Albin Marine 82 MS 1975 carries a 35-hp engine against 12 hp on the Albin Marine Shipman 28 1969. Motoring range and ability to punch through a foul current or enter a tight marina under power will favour the more powerful installation.

Hull speed is rated at 6,7 knots for the Albin Marine 82 MS 1975 and 6,5 knots for the Albin Marine Shipman 28 1969.

Bottom line: The Albin Marine 82 MS 1975 and Albin Marine Shipman 28 1969 are closely matched on paper. A sea trial on both in representative conditions is the only reliable way to find which one suits your sailing style, home port, and intended cruising ground.
Measurements / Dimensions
Length overall - Detail29.92 ft
Length overall - Detail28.11 ft
Length - Feet29.92
Length - Feet28.11
Length overall - Meters9.12
Length overall - Meters8.57
Length overall - Inches359
Length overall - Inches337
Beam9.33 ft
Beam8.60 ft
Beam - Meters2.84
Beam - Meters2.62
Beam - Inches112
Beam - Inches103
Draft [max] - Detail3.92 ft
Draft [max] - Detailnot available
Draft [max] - Meters1.19
Draft [max] - Metersnot available
Draft [max] - Inches47
Draft [max] - Inchesnot available
Displacement7496.00 lbs
Displacement6173.00 lbs
Draft Minnot available
Draft Min5.10 ft
Body / Hull
Rudder1 rudder on skeg
Rudder1 rudder on skeg
Helm1 wheel
Helm1 tiller
Engine and Drivetrain
Fuel tank capacity - Gal33
Fuel tank capacity - Galnot available
Fuel tank capacity - Liters124.92
Fuel tank capacity - Litersnot available
Engine makeVolvo Penta
Engine makenot available
Engine modelMD17C
Engine modelnot available
Horsepower35 hp
Horsepower12 hp
Fuel typeDiesel
Fuel typenot available
Drive typeinboard
Drive typeinboard
Performance
Maximum speed6.7
Maximum speed6.49
Maximum speed measureknots
Maximum speed measureknots
Operational Info
Sleeping capacity4
Sleeping capacitynot available
Cabins2
Cabinsnot available
Head1
Headnot available
Water capacity17.2
Water capacitynot available
RiggingSloop
RiggingSloop
Mast ConfigurationDeck stepped mast
Mast ConfigurationDeck stepped mast
Boat typeSail
Boat typeSail

Albin Marine 82 MS 1975 vs Albin Marine Shipman 28 1969 — Common Questions

Which is the larger boat — the Albin Marine 82 MS 1975 or the Albin Marine Shipman 28 1969?
The Albin Marine 82 MS 1975 is the longer of the two at 29,9 feet overall. The Albin Marine Shipman 28 1969 comes in at 28,1 feet, making it roughly 1,8 ft shorter — a meaningful difference in deck room and overall on-water presence.
Which is easier to trailer — the Albin Marine 82 MS 1975 or the Albin Marine Shipman 28 1969?
For trailering, the Albin Marine Shipman 28 1969 has the edge at 6 173 lbs dry weight versus 7 496 lbs for the Albin Marine 82 MS 1975. Add a motor (typically 300–500 lbs for an outboard in this class), gear, and a partial fuel load and the difference grows. Lighter is friendlier on smaller tow vehicles and on fuel economy while hauling.
Which boat can handle a bigger outboard?
The Albin Marine 82 MS 1975 is rated to a maximum of 35 hp, giving it the larger power ceiling. The Albin Marine Shipman 28 1969 tops out at 12 hp. Keep in mind that maximum ratings are just that — matching the motor to the actual load and usage pattern usually matters more than chasing the ceiling.
How many people can each boat hold?
The Albin Marine 82 MS 1975 is Coast Guard rated for 9 passengers, while the Albin Marine Shipman 28 1969 is certified for 8. Note that legal capacity and comfortable capacity aren't always the same thing — on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.
What is the draft of the Albin Marine 82 MS 1975?
The Albin Marine 82 MS 1975 draws 3,9 ft. Draft determines which harbours, anchorages, and haul-out facilities are accessible — always verify with your local marina before purchase.
Is the Albin Marine 82 MS 1975 or the Albin Marine Shipman 28 1969 better suited for offshore sailing?
For offshore work, displacement and construction are the primary indicators. The Albin Marine 82 MS 1975 at 7 496 lbs displacement is the heavier, more load-carrying design — generally better suited to extended passages where seakeeping and provisioning capacity matter most. The Albin Marine Shipman 28 1969 at 6 173 lbs will typically be livelier and more responsive in lighter conditions.
Which is the faster sailboat — the Albin Marine 82 MS 1975 or the Albin Marine Shipman 28 1969?
Based on rated hull speed, the Albin Marine 82 MS 1975 has an edge at 6,7 knots versus 6,5 knots for the Albin Marine Shipman 28 1969. Keep in mind that actual sailing speed depends heavily on wind conditions, sail trim, bottom condition, and skipper experience — hull speed is a theoretical maximum, not a guarantee.
Which boat is wider, and does it affect trailering?
The Albin Marine 82 MS 1975 measures 112" wide, compared to 103" for the Albin Marine Shipman 28 1969. The US standard-width towing limit is 8’6" (102") in most states — anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.
Are the Albin Marine 82 MS 1975 and Albin Marine Shipman 28 1969 from the same manufacturer?
Yes — both the Albin Marine 82 MS 1975 and the Albin Marine Shipman 28 1969 are built by Albin Marine. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.