The Albin Marine 82 MS 1975 vs Albin Marine Scampi 30 1979 comparison sits squarely in the category of decisions where specs alone won't tell the whole story — intended use, storage, and long-term ownership costs all factor in.

On paper these two are close siblings in the size department — Albin Marine 82 MS 1975 at 29,9 ft versus Albin Marine Scampi 30 1979 at 29,8 ft. Weight tells a clearer story for trailering families: the Albin Marine 82 MS 1975 tips the scales at 7 496 lbs — 221 lbs more than the Albin Marine Scampi 30 1979 at 7 275 lbs. That difference is meaningful if you're working within a half-ton or three-quarter-ton truck's tow rating, especially once you factor in a motor, gear, and fuel.

The power gap is worth calling out. Rated to 35 hp, the Albin Marine 82 MS 1975 has a 23-hp advantage over the Albin Marine Scampi 30 1979's 12-hp ceiling — enough to notice on acceleration and at cruising speed, particularly with a full passenger load.

Both boats are rated for 9 passengers — a good fit for a family of four or five plus guests. Comfort at capacity is another matter; the longer hull typically means more seat options and better weight distribution.

Both boats sit in a similar displacement bracket — 7 496 lbs for the Albin Marine 82 MS 1975 and 7 275 lbs for the Albin Marine Scampi 30 1979. Comparable displacement means broadly similar seakeeping behaviour and load capacity, though hull form and ballast ratio will still produce noticeably different sailing characteristics.

Draft is a practical consideration that many buyers underestimate until they're already at the marina. The Albin Marine Scampi 30 1979 draws 5,4 ft, compared to 3,9 ft for the Albin Marine 82 MS 1975. That 1,5-foot difference affects which anchorages you can access, which haul-out facilities will take you, and how carefully you need to read the tide tables in shallower cruising grounds.

The Albin Marine 82 MS 1975 uses Sloop rigging. Helm style differs too: the Albin Marine 82 MS 1975 uses a 1 wheel versus a 1 tiller on the Albin Marine Scampi 30 1979. Wheel helms give better leverage and visibility on larger boats; tillers offer direct feedback and simplicity on smaller ones. For auxiliary power the Albin Marine 82 MS 1975 carries a 35-hp engine against 12 hp on the Albin Marine Scampi 30 1979. Motoring range and ability to punch through a foul current or enter a tight marina under power will favour the more powerful installation.

Hull speed is rated at 6,7 knots for the Albin Marine 82 MS 1975 and 6,4 knots for the Albin Marine Scampi 30 1979.