Detailed Evaluation & Buyer Recommendation
AB Inflatables 28 VST 2013 vs AB Inflatables 9 VL 2012 — Which Inflatable Rigid Fits Your Needs?
When two boats share the same hull type — in this case both the AB Inflatables 28 VST 2013 and the AB Inflatables 9 VL 2012 are inflatable rigid designs with fiberglass construction — the buying decision usually comes down to a handful of practical questions: how many people are you putting on the water, how far do you trailer, and what does your tow vehicle weigh?
Size is the most obvious dividing line here. The AB Inflatables 28 VST 2013 measures 28,0 feet overall (2013), giving it roughly 18,5 additional feet of deck space compared to the AB Inflatables 9 VL 2012 at 9,5 feet (2012). Weight tells a clearer story for trailering families: the AB Inflatables 28 VST 2013 tips the scales at 286 lbs — 180 lbs more than the AB Inflatables 9 VL 2012 at 106 lbs. That difference is meaningful if you're working within a half-ton or three-quarter-ton truck's tow rating, especially once you factor in a motor, gear, and fuel.
The power gap is worth calling out. Rated to 400 hp, the AB Inflatables 28 VST 2013 has a 390-hp advantage over the AB Inflatables 9 VL 2012's 10-hp ceiling — enough to notice on acceleration and at cruising speed, particularly with a full passenger load.
For family outings this is probably the sharpest distinction between the two. The AB Inflatables 28 VST 2013 is rated for 25 passengers, while the AB Inflatables 9 VL 2012 caps at 4. If you're regularly pulling extended family or a group of friends onto the water, the extra seats on the AB Inflatables 28 VST 2013 could be the deciding factor.
Bottom line: Choose the AB Inflatables 28 VST 2013 if your priority is putting more people on the water — it handles 25 passengers and at 28,0 ft it has the deck room to back that rating up comfortably. The AB Inflatables 9 VL 2012 is the smarter pick if you want a lighter, easier-to-trailer boat rated for 4 that costs less to run day-to-day.
General Boat Info
MakeAB Inflatables
MakeAB Inflatables
Model Year2013
Model Year2012
Measurements / Dimensions
Beam9 ft. 10 in. (3 m) 6 ft. 4 in. (1.92 m) inside
Beam5 ft. 7 in. (1.72 m) Inside: 2 ft. 8 in. (0.81 m)
Beam - Meters3
Beam - Meters1.7
Beam - Inches118
Beam - Inches67
Weight - Detail2,860 lbs. (1,300 kg)
Weight - Detail106 lbs. (48 kg)
Weight - kg1297.27
Weight - kg48.08
Weight - lbs.286
Weight - lbs.106
Length [deck]22 ft. 11 in. (7 m)
Length [deck]6 ft. 9 in. (2.06 m)
Length - Feet28
Length - Feet9.5
Length overall - Detail28 ft. (8.53 m)
Length overall - Detail9 ft. 6 in. (2.9 m)
Length overall - Meters8.53
Length overall - Meters2.9
Length overall - Inches336
Length overall - Inches114
Body / Hull
Hull materialFiberglass
Hull materialFiberglass
Hull typeInflatable Rigid
Hull typeInflatable Rigid
Pontoon and Inflatable Specific
Tube diameter24 in. (0.61 m)
Tube diameter17 in. (0.43 m)
Engine and Drivetrain
Fuel tank capacity - Detail132 gal. (500 l)
Fuel tank capacity - Detailnot available
Fuel tank capacity - Liters499.67
Fuel tank capacity - Litersnot available
Fuel tank capacity - Gal132
Fuel tank capacity - Galnot available
Horsepower300 hp (223.8 kW) recommended
Horsepowernot available
Engine max400 hp (298.4 kW)
Engine max9.9 - 15 hp (7.4 - 11.2 kW)
Drive typenot available
Drive typeOutboard
Operational Info
Water capacity52 gal. (200 l)
Water capacitynot available
Maximum capacity4,796 lbs. (2,180 kg)
Maximum capacity1,393 lbs. (632 kg)
Maximum people25
Maximum people4